销售冠军
Showing 649-684 of 927 item(s)
12 24 36
CONCENTRIC TUBE HEAT EXCHANGER FOR TICC - TITC
Available
9.7.- 换热器
TITC
用于 TICC 的同心管热交换器
配件 TICC
The Concentric Tube Heat Exchanger for TICC, "TITC", designed by EDIBON, allows for the study of heat transfer between two fluids: the hot water flowing through the inner tube and the cold water flowing through the annular zone between the inner...
查看单位
SHELL & TUBE HEAT EXCHANGER FOR TICC - TICT
Available
9.7.- 换热器
TICT
用于 TICC 的壳管式热交换器
配件 TICC
The Shell and Tube Heat Exchanger for TICC, "TICT", designed by EDIBON, provides a comprehensive environment for the study of heat transfer. It allows analysis of the overall energy balance, heat losses in parallel and counterflow configurations,...
查看单位
PLATE HEAT EXCHANGER FOR TICC - TIPL
Available
9.7.- 换热器
TIPL
用于 TICC 的板式热交换器
配件 TICC
The Plate Heat Exchanger for TICC, "TIPL", designed by EDIBON, allows the study of heat transfer between hot and cold water flowing through alternate channels formed between parallel plates. This unit enables the analysis of how heat transfer...
查看单位
TURBULENT FLOW HEAT EXCHANGER FOR TICC - TIFT
Available
9.7.- 换热器
TIFT
用于 TICC 的湍流热交换器
配件 TICC
Heat exchangers with turbulent flow are widely used in various industries such as chemical, food, pharmaceutical, and energy generation. These devices play a fundamental role in heating and cooling fluids, as well as in cooling systems for...
查看单位
PRESSURE TEST MODULE FOR PLC - BS3-PLC
Available
6.2.3.- 用PLC进行仪表控制
BS3-PLC
用于PLC的压力测试模块
配件 BS-PLC
The "BS3-PLC" has been designed to study the pressure measurement techniques and control application with a PLC. This unit is equipped with a pressure chamber with several sensors, with different uses and applications, adjusted to measure the...
查看单位
PNEUMATIC TEST MODULE FOR PLC - BS9-PLC
Available
6.2.3.- 用PLC进行仪表控制
BS9-PLC
用于PLC的气动试验模块
配件 BS-PLC
The "BS9-PLC" has been designed to study the control and handling techniques of a pneumatic actuator through a PLC. The actuator is a double acting pneumatic cylinder that allows moving a platform. The displacement of the piston axle is detected...
查看单位
FLOW TEST MODULE FOR PLC - BS4-PLC
Available
6.2.3.- 用PLC进行仪表控制
BS4-PLC
用于PLC的流量测试模块
配件 BS-PLC
The "BS4-PLC" has been designed to study the flow measurement techniques and control with PLC. This unit is unit with two tanks assembled on a structure with a pumping system that allows pumping the water from the reservoir tank, through the...
查看单位
LIGHT TEST MODULE FOR PLC - BS10-PLC
Available
6.2.3.- 用PLC进行仪表控制
BS10-PLC
用于PLC的照明测试模块
配件 BS-PLC
The "BS10-PLC" has been designed to study different light measurement techniques and control light intensity through a PLC. This unit is composed of a lamp whose intensity can be controlled according to the voltage applied and a series of...
查看单位
INSULATING MATERIAL HEAT TRANSFER MODULE FOR TSTCC - TXC/TI
Available
9.6.- 传播热量
TXC/TI
用于TSTCC的绝缘材料传热设备
配件 TSTCC
The Insulating Material Heat Transfer Unit for TSTCC, "TXC/TI", enables the study of thermal conductivity resistance in different insulating materials.Bench-top unit to study the thermal conduction resistance of different thermal insulating...
查看单位
METAL TO METAL HEAT TRANSFER MODULE FOR TSTCC - TXC/MM
Available
9.6.- 传播热量
TXC/MM
用于TSTCC的（金属对金属）传热设备
配件 TSTCC
The Metal to Metal Heat Transfer Unit for TSTCC, "TXC/MM", enables the study of heat transfer in different metallic materials arranged in series.Bench-top unit designed to study of the heat transfer of different metallic materials situated in series.
查看单位
BALL AND BEAM MODULE - RYC-BB
Available
6.1.1.1.- 理论实用基础
RYC-BB
用于杆-球系统的PID控制与调节设备
配件 RYC, RYC/T
The "RYC-BB" Ball and Beam module has been designed to study a practical control system, through the study of a classical control system, the Ball and Beam Control system.The "RYC-BB" module consists of two main components: the "RYC-BB" apparatus...
查看单位
AIR FLOW TEMPERATURE CONTROL MODULE - RYC-TAR
Available
6.1.1.1.- 理论实用基础
RYC-TAR
用于气流温度的PID控制与调节设备
配件 RYC, RYC/T
The PID Temperature Control and Regulation of Air Flow Unit, "RYC-TAR", designed by EDIBON, enables the practical study of automatic control systems through the precise regulation of the temperature of an air stream at different points in the...
查看单位
WATER FLOW TEMPERATURE CONTROL MODULE - RYC-TAG
Available
6.1.1.1.- 理论实用基础
RYC-TAG
用于水流温度的PID控制与调节设备
配件 RYC, RYC/T
The PID Temperature Control and Regulation of Water Flow Unit, "RYC-TAG", designed by EDIBON, enables the practical study of automatic control systems through the regulation of water temperature by controlling the flow rate in a hot water...
查看单位
FLOW RATE CONTROL MODULE - RYC-C
Available
6.1.1.1.- 理论实用基础
RYC-C
用于流量的PID控制与调节设备
配件 RYC, RYC/T
The PID Flow Control and Regulation Unit, "RYC-C", designed by EDIBON, enables the practical study of automatic control systems through the regulation of water flow in a closed-loop circuit.This unit allows students and technicians to understand...
查看单位
LEVEL CONTROL MODULE - RYC-N
Available
6.1.1.1.- 理论实用基础
RYC-N
用于液位的PID控制与调节设备
配件 RYC, RYC/T
The PID Level Control and Regulation Unit, "RYC-N", designed by EDIBON, enables the practical study of automatic control systems through the regulation of water level in a tank.This unit allows students and technicians to understand and apply PID...
查看单位
TEMPERATURE CONTROL MODULE - RYC-TE
Available
6.1.1.1.- 理论实用基础
RYC-TE
用于温度的PID控制与调节设备
配件 RYC, RYC/T
The PID Temperature Control and Regulation Unit, "RYC-TE", designed by EDI­BON, enables the practical study of automatic control systems through the regulation of water temperature in a tank.This unit allows students and technicians to understand...
查看单位
POSITION CONTROL MODULE - RYC-CP
Available
6.1.1.1.- 理论实用基础
RYC-CP
用于电机位置的PID控制与调节设备
配件 RYC, RYC/T
The PID Position Control and Regulation of a Motor Unit, "RYC-CP", designed by EDIBON, enables the practical study of automatic control systems through the regulation of the linear position of a moving cart driven by a DC motor.This unit allows...
查看单位
STRUT BUCKLING UNIT - MFLT
  • MFLT
Available
7.3.2.1.- 机械测试
MFLT
用于研究棒材屈曲的设备
The Strut Buckling Unit "MFLT" allows the student to obtain experimentally the buckling critical load of slender struts subjected to compression.The unit allows to study the buckling of pieces of different lengths, ranging from 300 mm. to 625 mm.,...
查看单位
MAGNETIC LEVITATION CONTROL MODULE - RYC-CLM
Available
6.1.1.1.- 理论实用基础
RYC-CLM
用于磁悬浮的PID控制与调节设备
配件 RYC, RYC/T
The PID Magnetic Levitation Control and Regulation Unit, "RYC-CLM", desig­ned by EDIBON, enables the practical study of automatic control systems throu­gh the regulation of the vertical position of a magnetically levitated metal ball.This unit...
查看单位
CATALYTIC REACTORS - QRCB
  • QRCB
Available
11.2.- 化学反应器
QRCB
用于蔗糖水解的固定床催化反应器
Sucrose hydrolysis is a reversible reaction widely used at the industrial level to produce glucose and fructose. This process benefits greatly from catalysis, both chemical and enzymatic, and is a representative example of using fixed-bed reactors...
查看单位
COMPUTER CONTROLLED DIESEL ENGINE ELECTRICAL GENERATOR APPLICATION - TDEGC
  • TDEGC
Available
5.4.- 常规能源
TDEGC
由计算机（PC）控制的柴油发电机组应用
The Computer Controlled Diesel Engine Electrical Generator Application, "TDEGC", has been designed by EDIBON to conduct studies and research on the operation process of real power plants running with diesel gensets. This equipment is composed of...
查看单位
POWER PLANTS SIMULATION SOFTWARE - PSV-PPSS
  • PSV-PPSS
Available
5.1.3.1.- 发电
PSV-PPSS
电力厂模拟软件
To understand the impact of power plants as well as in order to improve its operation, EDIBON has developed a set of SCADA software to simulate power plants, through which teachers, researchers and students will be able to experiment with a wide...
查看单位
ELECTRIC NETWORKS KIT - M16/KIT
Available
2.2.- 电路组件套件
M16/KIT
电力网络套件
配件 M-KITS
With the Electric Networks Kit, "M16/KIT", designed by EDIBON, it is possible to understand the principles of Ohm’s Law, Norton’s and Thévenin’s Theorem, Wheatstone bridge operation, superposition theorems or star/delta transformation and viceversa.
查看单位
ELECTRIC NETWORKS MODULE - N-M16
  • N-M16
Available
14.2.1.1.- 基本电法概念
N-M16
电力网络模块
After studying the basic knowledge of electrical networks, we must understand and investigate the dependence between current and voltage applied to different electrical devices.With the Electric Networks Module, "N-M16", designed by EDIBON, it is...
查看单位
CONTROL AND DATA ACQUISITION SYSTEM SOFTWARE FOR ELECTRICAL MACHINES - EM-SCADA
  • EM-SCADA
Available
4.3.2.2.- 直流电动机和发电机
EM-SCADA
电动机控制与数据采集系统软件
The Control and Data Acquisition System Software for Electrical Machines, "EM-SCADA", has been developed by EDIBON to study and analyze the performance of rotating and static electrical machines such as three-phase and single-phase AC motors,...
查看单位
FAULTS SIMULATION APPLICATION IN ELECTRICAL MOTORS - AEL-ESAM
  • AEL-ESAM
Available
4.3.2.1.- 交流电动机和发电机
AEL-ESAM
电动机故障模拟应用
The Faults Simulation Application in Electrical Motors, "AEL-ESAM", has been designed by EDIBON to simulate non-destructive faults in three-phase motors and application of diagnostic and localization techniques.This application allows simulating...
查看单位
ENERGY EFFICIENCY IN ELECTRICAL MOTORS APPLICATION - AEL-EEEM
  • AEL-EEEM
Available
4.3.2.1.- 交流电动机和发电机
AEL-EEEM
电动机能效应用
The Energy Efficiency in Electrical Motors Application, "AEL-EEEM" has been designed by EDIBON to allow the students to understand how cutting-edge devices used in high performance systems to control electrical motors work : frequency controllers...
查看单位
ELECTRICAL MACHINES SOFT STARTERS APPLICATION - AEL-EMSS
  • AEL-EMSS
Available
4.3.2.1.- 交流电动机和发电机
AEL-EMSS
电动机软启动器应用
The Electrical Machines Soft Starters Application, "AEL-EMSS", has been designed by EDIBON to instruct the student in managing soft-starters of three-phase electrical machines. This application basically consists of three types of optional...
查看单位
ELECTRIC FIELDS STUDY SET - FCE
Available
1.1.- 3D物理
FCE
电场研究套件
配件 EFAC
The Electric Fields Study Set, "FCE", allows the spatial study of the electric field in all its dimensions: calculation of the intensity, force lines, equipotential surfaces in both static and dynamic fields, giving the student a more extensive...
查看单位
DISSECTIBLE MOTORS-GENERATORS APPLICATION - AEL-DMG-KIT
  • AEL-DMG-KIT
Available
4.4.2.- 可拆卸模型
AEL-DMG-KIT
电机-发电机组装应用
The Dissectible Motors-Generators Application, "AEL-DMG-KIT", has been designed by EDIBON for the training at theoretical-practical level about the assembly of the following electric motors: DC Compound with Shunt-Series Motor-Generator,...
查看单位
ELEVATOR CONTROL - N-EM-CA
  • N-EM-CA
Available
6.2.2.6.- 家庭和办公室
N-EM-CA
电梯控制
The "N-EM" are a series of emulators that provide the students the required hardware to emulate the most common automatic systems.The "N-EM" modules are designed to work with the "AE-PLC" units to obtain the fundamental knowledge of PLC...
查看单位
ELECTROTECHNICS APPLICATION (RLC CIRCUITS) - AEL-AI13-A
  • AEL-AI13-A
Available
4.1.2.1.- 驱动和操纵控制
AEL-AI13-A
电气工程应用（RLC电路）
The Electrotechnics Application (RLC Circuits), "AEL-AI13-A", is designed with the aim to understand the working and the purposes of RLC circuits. For that, this application have a set of resistors, inductances and capacitors with different values...
查看单位
要求信息