7.2.- 汽车机械工程

汽车工业是当今机械工程的主要应用领域之一。使用汽油内燃机的汽车被认为是20世纪最伟大的发明,尽管第一辆原型车在18世纪末就开始制造。第一辆原型车可以追溯到1769年,由一辆蒸汽驱动的马车组成。虽然没有成功,但为1860年汽油机的发展开创了先河。从这一发现开始,就开始了不可阻挡的发展,奔驰、标致、菲亚特或福特等汽车工业如雨后春笋般涌现。在千年之交,开始研究使用其他化石燃料,如柴油。

查看更多

今天,利用现有的所有技术和手段,可以了解构成车辆的所有元素在无限多情况下的行为。之所以能达到这样的水平,得益于每个设计、分析等背后的工程。研究最多的一些系统是:

  • 传送。
  • 刹车。
  • 暂停。
  • 发动机性能。
  • 电子产品。
  • 排放。
  • 安全性。

汽车工业必须不断地自我更新,研究和应用一切力所能及的技术进步,才能具有竞争力,才能满足当今社会的需求。该领域的趋势是寻求更可持续、更环保的能源,以及更高效、更高性能的设计,随着混合动力车和电动车的出现,以及以液化石油气(LPG)或氢气等其他燃料为动力的车辆的出现,这种趋势已经成为现实。

查看产品
汽车机械工程 UNITS
Showing 1-23 of 23 item(s)
DRUM BRAKE UNIT - MFT
  • MFT
Available
7.2.1.- 刹车和离合器
MFT
Drum Brake Unit
The Drum Brake Unit, "MFT", allows the study of the forces acting on a drum brake, the difference between the braking torque of the primary shoe and secondary shoe braking systems and determining the coefficient of friction between the drum and...
DISC BRAKE UNIT - MFD
  • MFD
Available
7.2.1.- 刹车和离合器
MFD
Disc Brake Unit
This unit "MFD" has been designed to carry out experiments to investigate the relationship between the normal force acting on the brake pads, the effective radius of the brake pads and the braking torque.The brake pads are located on bell crank...
BRAKING AND ACCELERATING FORCES UNIT - MFF
  • MFF
Available
7.2.1.- 刹车和离合器
MFF
Braking and Accelerating Forces Unit
With the Braking and Accelerating Forces Unit, "MFF", practices and experiments can be carried out to study the relationship between the forces involved in the braking and acceleration of a vehicle. It also allows demonstrating the relationship...
PLATE CLUTCH - MEM
  • MEM
Available
7.2.1.- 刹车和离合器
MEM
Plate Clutch
The Plate Clutch, "MEM", allows to demonstrate the influence of the friction surface and the applied pressure of the springs on the transmitted torque for a friction clutch. To this end, several clutch discs with different diameters and...
SIMPLE HYDRAULIC UNIT - MSH
  • MSH
Available
7.2.1.- 刹车和离合器
MSH
简单液压设备
The Simple Hydraulic Unit, "MSH", has been designed for studies related to mechanical engineering and motor vehicles. It is used to demonstrate how a liquid can be used to transmit a force.The unit can also be used to conduct experiments to study...
GEARED STUDY - MESE-T
  • MESE-T
Available
7.1.2.2.- 齿轮
MESE-T
Geared Study
The Geared Study Drive Unit, "MESE", has been designed by EDIBON to dynamic study of different gears, including a standard three shaft gear train for study, which can be modified with a simple setting to obtain a simple transmission.For the...
GEARBOX - MCC
  • MCC
Available
7.2.2.- 齿轮, 差速器和变速箱
MCC
Gearbox
The Gearbox unit, "MCC", has been designed to represent the typical position of a simple gearbox with three gears ratio and reverse.Basically, the gearbox consists of several gears of different size that can be meshed as required. Those gears are...
EPICYCLIC GEAR UNIT (1 ELEMENT) - MTE1
  • MTE1
Available
7.2.2.- 齿轮, 差速器和变速箱
MTE1
Epicyclic Gear Unit (1 element)
The Epicyclic Gear Unit (1 element), "MTE1", includes a set of epicyclic gears that allows the student to study different reduction ratios (direct drive and overdrive), as well as torque conversion.A simple epicyclic gears set consists of:Sun gear...
EPICYCLIC GEAR UNIT (2 ELEMENTS) - MTE2
  • MTE2
Available
7.2.2.- 齿轮, 差速器和变速箱
MTE2
Epicyclic Gear Unit (2 elements)
The Epicyclic Gear Unit (2 elements), "MTE2", consists of two coupled epicyclic gears sets. It will allow the students to carry out experiments of different gear ratios, as well as the torque conversions.The epicyclic gears installed in the...
EPICYCLIC GEAR UNIT (3 ELEMENTS) - MTE3
  • MTE3
Available
7.2.2.- 齿轮, 差速器和变速箱
MTE3
Epicyclic Gear Unit (3 elements)
The Epicyclic Gear Unit (3 elements), "MTE3", consists of three coupled epicyclic gears sets. It will allow the students to carry out experiments of different gear ratios, as well as the torque conversions.The epicyclic gears installed in the...
BORG-WARNER AUTOMATIC TRANSMISSION - MBW
  • MBW
Available
7.2.2.- 齿轮, 差速器和变速箱
MBW
Borg-Warner Automatic Transmission
The main distinguishing element of automatic transmissions is its group of epicyclic gearing.The gear assembly of the "MBW" unit consists of:Two sun gears, one to transfer forward gear ratios and one reverse gear.Two sets of planet gears: long and...
DIFFERENTIAL-CROWNWHEEL AND PINION - MDC
  • MDC
Available
7.2.2.- 齿轮, 差速器和变速箱
MDC
Differential-Crownwheel and Pinion
The Differential-Crownwheel and Pinion, "MDC", designed by EDIBON, simulates a differential mechanism. The function of the differential mechanism is to enable the drive wheels rotate at different speeds, regardless of whether they are the front or...
OVERDRIVE UNIT - MEC
  • MEC
Available
7.2.2.- 齿轮, 差速器和变速箱
MEC
Overdrive Unit
The Overdrive Unit, "MEC", includes a set of epicyclical gears that represent an application of a simple epicyclic arrangement of the type used in a motor vehicle overdrive.Simple epicyclic set consists of:Sun gear that rotates together with the...
COMPUTER CONTROLLED BALANCE OF RECIPROCATING MASSES UNIT - MBMRC
  • MBMRC
Available
7.1.3.- 静态和动态
MBMRC
Computer Controlled Balance of Reciprocating Masses Unit
The Computer Controlled Balance of Reciprocating Masses Unit, "MBMRC", is a bench-mounting unit that allows to investigate and examine the free masses and moments of a reciprocating engine with a single cylinder, with two cylinders or with four...
STATIC AND DYNAMIC BALANCING UNIT - MED
  • MED
Available
7.1.3.- 静态和动态
MED
Static and Dynamic Balancing Unit
The Static and Dynamic Balancing Unit, "MED", developed by EDIBON is a unit to study and analyze the oscillations and vibrations and how to eliminate or diminish them.Basically, the unit is formed by a shaft mounted on bearings. The shaft is...
COMPUTER CONTROLLED TEST BENCH FOR SINGLE-CYLINDER ENGINES, 2.2 KW - TBMC3
  • TBMC3
Available
7.2.3.- 引擎
TBMC3
用于2.2千瓦的计算机控制测试台
The Computer Controlled Test Bench for Single-Cylinder Engines, 2.2 kW, "TBMC3", designed by EDIBON, is a teaching unit to test internal combustion engines of up to 2.2 kW.The unit has an element to exert the braking torque, an asynchronous motor...
COMPUTER CONTROLLED TEST BENCH FOR 7.5 KW ENGINES - TBMC8
  • TBMC8
Available
7.2.3.- 引擎
TBMC8
用于7.5千瓦的计算机控制测试台
The Computer Controlled Test Bench for Single-Cylinder Engines, 7.5 kW, "TBMC8", designed by EDIBON, is a teaching unit to test internal combustion engines of up to 7.5 kW.The element of the unit that offers load torque is an eddy current...
COMPUTER CONTROLLED TEST BENCH FOR 11 KW ENGINES - TBMC12
  • TBMC12
Available
7.2.3.- 引擎
TBMC12
用于11千瓦的计算机控制测试台
The Computer Controlled Test Bench for Single-Cylinder and Two-Cylinders Engines, 11 kW, "TBMC12", designed by EDIBON, is a teaching unit to test internal combustion engines of up to 11 kW.The element of the unit that offers load torque is an eddy...
COMPUTER CONTROLLED TEST BENCH FOR 75 KW ENGINES - TBMC75
  • TBMC75
Available
7.2.3.- 引擎
TBMC75
用于75千瓦的计算机控制测试台
The Computer Controlled Test Bench for Four Cylinders Engines, 75 kW, "TBMC75", designed by EDIBON, is a teaching unit to test internal combustion engines of up to 75 kW.The element of the unit that offers load torque is an eddy current...
COMPUTER CONTROLLED EXHAUST GAS CALORIMETER - TBMC-CG
  • TBMC-CG
Available
7.2.3.- 引擎
TBMC-CG
电脑控制废气热量表
The Computer Controlled Exhaust Gas Calorimeter, "TBMC-CG", is mounted on a laminated aluminium profiles frame and panels in painted steel.The main element consists on a double-wall tank made in stainless steel. Through the tank interior the...
EXHAUST GAS ANALYZER - TBMC-AGE
  • TBMC-AGE
Available
7.2.3.- 引擎
TBMC-AGE
排放废气分析仪
Measurement of the volumetric concentrations according to the procedure of nondispersiva infrared absorption.Engines selection: gasoline, butane, propane, 2/4 times, 1/2/3/4/5/6/8/12 cylinders.Fast warm-up of the measure cell.Auto-check...
COMPUTER CONTROLLED TEST BENCH FOR HYBRID ENGINE - TMHC
  • TMHC
Available
7.2.3.- 引擎
TMHC
计算机控制混合动力引擎试验台
The Computer Controlled Test Bench for Hybrid Engine, "TMHC", is a teaching unit that allows to study and analyze the power source of a hybrid vehicle, consisting on a combination of an electrical motor and an internal combustion engine.These two...
要求信息