10.- プロセス制御

業界では、固定パラメータを維持する必要のある機器やプロセスを簡単に見つけることができます。モーターの速度、流量、油圧回路のレベルと温度、または圧縮空気システムの圧力は、この良い例です。プロセス制御エンジニアリングの目的は、監視および制御システムの実装を通じてこれらのプロセスを自動化することです。

もっと見る

この分野は、システムのダイナミクスと関連する機器(センサー、アクチュエーター、コントローラーなど)の研究から、制御戦略の開発とその後の実装に至るまで、さまざまな産業用通信プロトコルの研究を通じて行われます。これらは、このタイプのシステム(Fieldbus、HARTなど)で使用されます。

今日最も使用されている制御アルゴリズムは、PID制御(比例、積分、および微分)です。この制御メカニズムから、カスケード制御、多変量制御、予測制御またはフィードフォワード制御、選択的制御など、より複雑な戦略が開発されました。これらの戦略は、産業用コントローラー、プログラマブルロジックコントローラー(PLC)、SCADA取得および制御アプリケーションを通じて実装され、制御に加えて、プロセスの視覚化を可能にします。制御は、単一の制御デバイス(集中制御システム)またはコントローラーの組織化されたネットワーク(分散制御システム)を介して実行できます。

制御システムが産業プロセスにもたらす生産性と効率の向上は、予測制御、適応制御、ファジー制御などの新しい高度な制御アルゴリズムの調査を支持しています。

製品を見る
関連資料
プロセス制御 SUBCATEGORIES

10.1.- 理論的-実践的基礎

自動制御は、制御システムと呼ばれる一連のデバイスとメカニズムを使用して、機器、プロセス、または完全なプラントの動作を調整する責任を負う工学の一部門です。オープンループ制御システムは、出力の値に関係なくシステム入力(アクチュエータ)に作用します。これに対して、クローズドループシステムは、制御するパラメータ(制御変数)のフィードバックに基づいて動作します。これらのシステムでは、センサが対応する変数を測定し、コントローラによって、測定値が所望の値(基準信号)と比較される。比較で得られた差(誤差)に応じて、制御変数(被操作変数)に動作を行います。制御システムの要素とその関係をブロック図で定義しま...
ほら

10.2.- コントローラーと産業用通信

大規模な産業プラントの制御の進化は、制御が単一のデバイスに実装されていない新しいタイプのシステムの出現につながっています:分散制御システムまたはDCS。これらのシステムでは、自動化されるプロセスは単純な制御ループに分割され、産業用コントローラやプログラマブル・ロジック・コントローラ(PLC)によって局所的に制御され、中央監視制御・データ収集システム(SCADA)によって監視されます。このように分散化された構造では、異なるデバイス間での動作の階層構造(CIMモデルやピラミッド)と、情報の流れを可能にする通信ネットワークを構築する必要があります。CIM自動化モデルでは、上位レベルは監督と生産...
ほら

10.3.- 産業用アプリケーションおよびシステム

プロセス産業では、設備やプラントの最適な運用が不可欠です。この目的を達成するために、制御すべきパラメータ(制御変数)を測定するセンサ、その値を変更することができるアクチュエータ(操作変数)、および作動の値を定義するコントローラが設置されています。この一連の装置は、制御システムと呼ばれています。業界で最も一般的な例のいくつかは、流量制御システム、空気弁や電磁弁を介して流体のレベルや温度、定量ポンプや制御システムの圧力とガスの流れによる溶液の制御システムのpHです。しかし、大規模な産業プラントでは、このような単純な制御ループは単独で発生するのではなく、分散制御システムまたはDCSによって制御...
ほら
プロセス制御 UNITS
1-30 を表示中 合計 41 商品
BASIC TEACHING UNIT FOR THE STUDY OF REGULATION AND CONTROL - RYC/B
  • RYC/B
Available
6.1.1.1.- 理論的-実践的基礎
RYC/B
調整・制御学習基本指導用装置
The Basic Teaching Unit for the Study of Regulation and Control, "RYC/B", allows the user to learn the basics about regulation and control of first and second order systems.This unit enables to carry a set of practices related with basic...
BALL AND BEAM MODULE - RYC-BB
Available
6.1.1.1.- 理論的-実践的基礎
RYC-BB
梁と球モジュール
の付属品 RYC, RYC/T
The "RYC-BB" Ball and Beam module has been designed to study a practical control system, through the study of a classical control system, the Ball and Beam Control system.The "RYC-BB" module consists of two main components: the "RYC-BB" apparatus...
DC SERVO MOTOR MODULE - RYC-SM
Available
6.1.1.1.- 理論的-実践的基礎
RYC-SM
直流サーボモーターモジュール
の付属品 RYC, RYC/T
The "RYC-SM" Servo Motor module has been designed to study a practical control system, through the control of the position and speed of a DC Servo Motor.The "RYC-SM" module consists of two main components: the "RYC-SM" apparatus and the "RYC-SM"...
AIR FLOW TEMPERATURE CONTROL MODULE - RYC-TAR
Available
6.1.1.1.- 理論的-実践的基礎
RYC-TAR
気流温度制御モジュール
の付属品 RYC, RYC/T
The "RYC-TAR" Air Flow Temperature Control module has been designed to study a practical control system, through the control of an air flow temperature.The "RYC-TAR" module consists of two main components: the "RYC-TAR" apparatus and the "RYC-TAR"...
INVERTED PENDULUM CONTROL MODULE - RYC-PI
Available
6.1.1.1.- 理論的-実践的基礎
RYC-PI
逆転振り子制御モジュール
の付属品 RYC, RYC/T
The "RYC-PI" Inverted Pendulum Control module has been designed to study a practical control system, through the control of a linear position system of movable cart.The "RYC-PI" module consists of two main components: the "RYC-PI" apparatus and...
MAGNETIC LEVITATION CONTROL MODULE - RYC-CLM
Available
6.1.1.1.- 理論的-実践的基礎
RYC-CLM
磁気浮揚制御モジュール
の付属品 RYC, RYC/T
The "RYC-CLM" Magnetic Levitation Control module has been designed to study a practical control system.The "RYC-CLM" module consists of two main components: the "RYC-CLM" apparatus and the "RYC-CLM" interface box. The "RYC-CLM" apparatus contains...
WATER FLOW TEMPERATURE CONTROL MODULE - RYC-TAG
Available
6.1.1.1.- 理論的-実践的基礎
RYC-TAG
水流温度制御モジュール
の付属品 RYC, RYC/T
The "RYC-TAG" Water Flow Temperature Control module has been designed to study a practical control system, through the control of water flow temperature.The "RYC-TAG" module consists of two main components: the "RYC-TAG" apparatus and the...
TEMPERATURE CONTROL MODULE - RYC-TE
Available
6.1.1.1.- 理論的-実践的基礎
RYC-TE
温度制御モジュール
の付属品 RYC, RYC/T
The "RYC-TE" Temperature Control module has been designed to study a practical control system, through the control of the water temperature in a tank.The "RYC-TE" module consists of two main components: the "RYC-TE" apparatus and the "RYC-TE"...
PRESSURE CONTROL MODULE - RYC-P
Available
6.1.1.1.- 理論的-実践的基礎
RYC-P
水圧制御モジュールJ
の付属品 RYC, RYC/T
The "RYC-P" Pressure Control module has been designed to study a practical control system, through the control of the air pressure level of an air pressure tank.The "RYC-P" module consists of two main components: the "RYC-P" apparatus and the...
LEVEL CONTROL MODULE - RYC-N
Available
6.1.1.1.- 理論的-実践的基礎
RYC-N
水位制御モジュール
の付属品 RYC, RYC/T
The "RYC-N" Level Control module has been designed to study a practical control system, through the control of the water level of a tank.The "RYC-N" module consists of two main components: the "RYC-N" apparatus and the "RYC-N" interface box. The...
FLOW RATE CONTROL MODULE - RYC-C
Available
6.1.1.1.- 理論的-実践的基礎
RYC-C
流量制御モジュール
の付属品 RYC, RYC/T
The "RYC-C" Flow Rate Control module has been designed to study a practical control system, through the flow rate of a close water circuit.The "RYC-C" module consists of two main components: the "RYC-C" apparatus and the "RYC-C" interface box. The...
LUMINOSITY CONTROL MODULE - RYC-I
Available
6.1.1.1.- 理論的-実践的基礎
RYC-I
照明制御モジュール
の付属品 RYC, RYC/T
The "RYC-I" Luminosity Control module has been designed to study a practical control system and study different light sensors, through the luminosity control with three different light sensors.The "RYC-I" module consists of two main components:...
PH CONTROL MODULE - RYC-pH
Available
6.1.1.1.- 理論的-実践的基礎
RYC-pH
pH制御モジュール
の付属品 RYC, RYC/T
The "RYC-pH" pH Control module has been designed to study a practical control system, through the pH dissolution control in a stirred tank.The "RYC-pH" module consists of two main components: "RYC-pH" apparatus and "RYC-pH" interface box. The...
POSITION CONTROL MODULE - RYC-CP
Available
6.1.1.1.- 理論的-実践的基礎
RYC-CP
位置制御モジュール
の付属品 RYC, RYC/T
The "RYC-CP" Position Control module has been designed to study a practical control system, through the control of a linear position system.The "RYC-CP" module consists of two main components: the "RYC-CP" apparatus and the "RYC-CP" interface box....
INDUSTRIAL CONTROLLERS UNIT - CECI
  • CECI
Available
6.1.1.2.- 産業用コントローラー
CECI
産業用コントローラー演習装置
The Industrial Controllers Unit, "CECI", is based on a modular design structure whose functionality is divided into different modules toallow the student a better understanding of the unit. The modules included in the unit are: industrial...
INDUSTRIAL CONTROLLERS NETWORKING - CRCI
  • CRCI
Available
6.1.1.2.- 産業用コントローラー
CRCI
産業用コントローラーネットワーク
The Industrial Controllers Networking, "CRCI", unit is based on a modular design structure whose functionality is divided into different modules to allow the student a better understanding of the unit. The modules provided with the unit are: two...
COMPUTER CONTROLLED CONTROLLER TUNING UNIT - CEAC
  • CEAC
Available
6.1.1.2.- 産業用コントローラー
CEAC
制御装置チューニング演習装置
The Computer Controlled Controller Tuning Unit, "CEAC", provides the tools to simulate different industrial processes in a HIL system and control them with a commercial industrial controller. The CEAC unit works in conjunction with a computer, in...
APPLICATIONS FOR PROCESS CONTROL - APC
  • APC
Available
10.3.- 産業用アプリケーションおよびシステム
APC
Applications for Process Control
The Applications for Process Control, "APC", designed by EDIBON, allows the student to design, assemble and configure various control systems, apart from studying the fundamentals of the control engineering on which they are based.These...
リクエスト情報