10.- PROZESSSTEUERUNG

Peralatan atau proses yang memerlukan pemeliharaan beberapa parameter tetap dapat dengan mudah ditemukan di industri. Kecepatan motor, aliran, level dan suhu dari sirkuit hidrolik atau tekanan sistem udara tekan adalah contoh yang baik. Tujuan dari rekayasa kontrol proses adalah otomatisasi dari proses ini melalui penerapan sistem pemantauan dan kontrol.

Mehr sehen

Disiplin ini mencakup dari studi tentang dinamika sistem dan instrumentasi yang terlibat (sensor, aktuator, pengontrol, dll.) untuk pengembangan strategi kontrol dan implementasi berikutnya, termasuk studi tentang protokol komunikasi industri yang berbeda yang digunakan dalam jenis ini sistem (Fieldbus, HART, dll).

Saat ini, algoritme kontrol yang paling umum digunakan adalah kontrol PID (proporsional, integral, dan turunan). Dari mekanisme kontrol ini, strategi yang lebih kompleks telah dikembangkan, seperti kontrol bertingkat, kontrol multivariabel, kontrol penerusan dan kontrol selektif. Strategi ini diterapkan menggunakan aplikasi pengontrol industri, pengontrol logika terprogram (PLC) dan aplikasi kontrol dan akuisisi SCADA yang, selain kontrol, izinkan visualisasi proses. Kontrol dapat dilakukan dengan satu perangkat kontrol (sistem kontrol terpusat) atau melalui jaringan pengontrol yang terorganisir (kontrol terdistribusi sistem).

Peningkatan produktivitas dan efisiensi yang disediakan sistem kontrol untuk proses industri mendukung penelitian algoritme kontrol lanjutan baru, seperti kontrol prediksi, kontrol adaptif atau kontrol fuzzy.

Siehe Produkte
Verwandte Materialien
PROZESSSTEUERUNG SUBCATEGORIES

10.1.- THEORETISCH - PRAKTISCHE GRUNDLAGEN

Die automatische Steuerung ist der Zweig der Technik, der für die Regelung des Betriebs von Geräten, Prozessen oder ganzen Anlagen verantwortlich ist, wobei eine Reihe von Geräten und Mechanismen verwendet wird, die als Steuerungssystem bezeichnet werden. Steuerungen wirken auf den Eingang des...
Sehen

10.2.- CONTROLLER & INDUSTRIELLE KOMMUNIKATION

Die Entwicklung bei der Steuerung großer Industrieanlagen führt zu einem neuen Systemtyp, bei dem die Steuerung nicht mehr in einem einzigen Gerät implementiert ist: verteilte Steuerungssysteme oder DCS. In diesen Systemen ist der zu automatisierende Prozess in einfache Regelkreise unterteilt,...
Sehen

10.3.- INDUSTRIELLE ANWENDUNGEN UND SYSTEME

Ein optimaler Betrieb der Ausrüstung und Anlagen ist in der Prozessindustrie unerlässlich. Einige Geräte werden installiert, um diesen Zweck zu erreichen: Sensoren zur Messung der zu regelnden Parameter (Regelgrössen), Aktoren zur Änderung ihrer Werte (Manipulierte Variablen) und Regler zur...
Sehen
PROZESSSTEUERUNG UNITS
1 - 30 von 41 Artikel(n)
COMPUTER CONTROLLED MODULAR CONTROL AND REGULATION UNIT - RYC/T
  • RYC/T
Available
10.1.- THEORETISCH - PRAKTISCHE GRUNDLAGEN
RYC/T
Computer Controlled Modular Control and Regulation Unit
Regulation and control theory is divided into two major divisions in, namely, classical and modern. The implementation of classical controller designs as compared to systems designed using modern control theory is easier and these controllers are...
BALL AND BEAM MODULE - RYC-BB
Available
6.1.1.1.- THEORETISCH-PRAKTISCHE GRUNDLAGEN
RYC-BB
Ball and Beam Module
Zubehör von RYC, RYC/T
The "RYC-BB" Ball and Beam module has been designed to study a practical control system, through the study of a classical control system, the Ball and Beam Control system.The "RYC-BB" module consists of two main components: the "RYC-BB" apparatus...
DC SERVO MOTOR MODULE - RYC-SM
Available
6.1.1.1.- THEORETISCH-PRAKTISCHE GRUNDLAGEN
RYC-SM
DC Servo Motor Module
Zubehör von RYC, RYC/T
The "RYC-SM" Servo Motor module has been designed to study a practical control system, through the control of the position and speed of a DC Servo Motor.The "RYC-SM" module consists of two main components: the "RYC-SM" apparatus and the "RYC-SM"...
AIR FLOW TEMPERATURE CONTROL MODULE - RYC-TAR
Available
6.1.1.1.- THEORETISCH-PRAKTISCHE GRUNDLAGEN
RYC-TAR
Air Flow Temperature Control Module
Zubehör von RYC, RYC/T
The "RYC-TAR" Air Flow Temperature Control module has been designed to study a practical control system, through the control of an air flow temperature.The "RYC-TAR" module consists of two main components: the "RYC-TAR" apparatus and the "RYC-TAR"...
INVERTED PENDULUM CONTROL MODULE - RYC-PI
Available
6.1.1.1.- THEORETISCH-PRAKTISCHE GRUNDLAGEN
RYC-PI
Inverted Pendulum Control Module
Zubehör von RYC, RYC/T
The "RYC-PI" Inverted Pendulum Control module has been designed to study a practical control system, through the control of a linear position system of movable cart.The "RYC-PI" module consists of two main components: the "RYC-PI" apparatus and...
MAGNETIC LEVITATION CONTROL MODULE - RYC-CLM
Available
6.1.1.1.- THEORETISCH-PRAKTISCHE GRUNDLAGEN
RYC-CLM
Magnetic Levitation Control Module
Zubehör von RYC, RYC/T
The "RYC-CLM" Magnetic Levitation Control module has been designed to study a practical control system.The "RYC-CLM" module consists of two main components: the "RYC-CLM" apparatus and the "RYC-CLM" interface box. The "RYC-CLM" apparatus contains...
WATER FLOW TEMPERATURE CONTROL MODULE - RYC-TAG
Available
6.1.1.1.- THEORETISCH-PRAKTISCHE GRUNDLAGEN
RYC-TAG
Water Flow Temperature Control Module
Zubehör von RYC, RYC/T
The "RYC-TAG" Water Flow Temperature Control module has been designed to study a practical control system, through the control of water flow temperature.The "RYC-TAG" module consists of two main components: the "RYC-TAG" apparatus and the...
TEMPERATURE CONTROL MODULE - RYC-TE
Available
6.1.1.1.- THEORETISCH-PRAKTISCHE GRUNDLAGEN
RYC-TE
Temperature Control Module
Zubehör von RYC, RYC/T
The "RYC-TE" Temperature Control module has been designed to study a practical control system, through the control of the water temperature in a tank.The "RYC-TE" module consists of two main components: the "RYC-TE" apparatus and the "RYC-TE"...
PRESSURE CONTROL MODULE - RYC-P
Available
6.1.1.1.- THEORETISCH-PRAKTISCHE GRUNDLAGEN
RYC-P
Pressure Control Module
Zubehör von RYC, RYC/T
The "RYC-P" Pressure Control module has been designed to study a practical control system, through the control of the air pressure level of an air pressure tank.The "RYC-P" module consists of two main components: the "RYC-P" apparatus and the...
LEVEL CONTROL MODULE - RYC-N
Available
6.1.1.1.- THEORETISCH-PRAKTISCHE GRUNDLAGEN
RYC-N
Level Control Module
Zubehör von RYC, RYC/T
The "RYC-N" Level Control module has been designed to study a practical control system, through the control of the water level of a tank.The "RYC-N" module consists of two main components: the "RYC-N" apparatus and the "RYC-N" interface box. The...
FLOW RATE CONTROL MODULE - RYC-C
Available
6.1.1.1.- THEORETISCH-PRAKTISCHE GRUNDLAGEN
RYC-C
Flow Rate Control Module
Zubehör von RYC, RYC/T
The "RYC-C" Flow Rate Control module has been designed to study a practical control system, through the flow rate of a close water circuit.The "RYC-C" module consists of two main components: the "RYC-C" apparatus and the "RYC-C" interface box. The...
LUMINOSITY CONTROL MODULE - RYC-I
Available
6.1.1.1.- THEORETISCH-PRAKTISCHE GRUNDLAGEN
RYC-I
Luminosity Control Module
Zubehör von RYC, RYC/T
The "RYC-I" Luminosity Control module has been designed to study a practical control system and study different light sensors, through the luminosity control with three different light sensors.The "RYC-I" module consists of two main components:...
PH CONTROL MODULE - RYC-pH
Available
6.1.1.1.- THEORETISCH-PRAKTISCHE GRUNDLAGEN
RYC-pH
pH Control Module
Zubehör von RYC, RYC/T
The "RYC-pH" pH Control module has been designed to study a practical control system, through the pH dissolution control in a stirred tank.The "RYC-pH" module consists of two main components: "RYC-pH" apparatus and "RYC-pH" interface box. The...
POSITION CONTROL MODULE - RYC-CP
Available
6.1.1.1.- THEORETISCH-PRAKTISCHE GRUNDLAGEN
RYC-CP
Position Control Module
Zubehör von RYC, RYC/T
The "RYC-CP" Position Control module has been designed to study a practical control system, through the control of a linear position system.The "RYC-CP" module consists of two main components: the "RYC-CP" apparatus and the "RYC-CP" interface box....
INDUSTRIAL CONTROLLERS UNIT - CECI
  • CECI
Available
6.1.1.2.- INDUSTRIELLE STEUERGERÄTE
CECI
Trainer für industrielle Steuerungen
The Industrial Controllers Unit, "CECI", is based on a modular design structure whose functionality is divided into different modules toallow the student a better understanding of the unit. The modules included in the unit are: industrial...
INDUSTRIAL CONTROLLERS NETWORKING - CRCI
  • CRCI
Available
6.1.1.2.- INDUSTRIELLE STEUERGERÄTE
CRCI
Industrielle Steuerungsnetzwerke
The Industrial Controllers Networking, "CRCI", unit is based on a modular design structure whose functionality is divided into different modules to allow the student a better understanding of the unit. The modules provided with the unit are: two...
COMPUTER CONTROLLED CONTROLLER TUNING UNIT - CEAC
  • CEAC
Available
6.1.1.2.- INDUSTRIELLE STEUERGERÄTE
CEAC
Reglereinstellungstrainer.
The Computer Controlled Controller Tuning Unit, "CEAC", provides the tools to simulate different industrial processes in a HIL system and control them with a commercial industrial controller. The CEAC unit works in conjunction with a computer, in...
FIELD BUS APPLICATIONS UNIT - CEAB
  • CEAB
Available
6.1.1.2.- INDUSTRIELLE STEUERGERÄTE
CEAB
Trainer für Feldbusanwendungen.
The Trainer for Field Bus Applications, "CEAB", provides the components to conform a real Profibus DP Network where the PC is the master device and different components included with the unit are the slave devices. The "CEAB" unit also allows to...
APPLICATIONS FOR PROCESS CONTROL - APC
  • APC
Available
10.3.- INDUSTRIELLE ANWENDUNGEN UND SYSTEME
APC
Applications for Process Control
The Applications for Process Control, "APC", designed by EDIBON, allows the student to design, assemble and configure various control systems, apart from studying the fundamentals of the control engineering on which they are based.These...
Informationen anfordern