14.1.- 生体力学

バイオメカニクスは、人体の動きをはじめとする生物の生体の動きの力学を研究しています。この研究では、仕事やスポーツなどの日常生活の中で最も単純な動きから、心臓などの内臓の動きまで幅広く研究しています。人体の運動学を研究するために、バイオメカニクスは、力学の原理と解剖学と生理学の知識を応用して、新しい診断・治療機器の設計や、より良い補綴物やインプラントの設計を可能にします。

もっと見る

現在、バイオメカニクスでは、関節と筋肉を組み合わせた様々な動きを分析しています。これらの解析により、人体が受ける荷重や応力を調べることができます。人間の運動学の知識は、怪我の治療とその後のリハビリテーション、柔軟な動きを可能にする義肢の設計、身体活動のパフォーマンスを向上させるための新しいスポーツ技術の探求、または仕事や家庭での活動を行う際の生体の劣化を防ぐことを可能にします。これらの知識はすべて、バイオメカニクスのいくつかの分野に分けることができます:メディカルバイオメカニクス、スポーツバイオメカニクス、職業バイオメカニクスです。バイオメカニクスのもう一つの応用として、ロボットアプリケーションの設計があります。ロボットアームが行う運動や、その一部の変位能力を電気機械的な運動システムによって実現することは、生物の力学に基づいています。

生物の機械的挙動の継続的な研究は、実際の生物の正常な機能をシミュレートし、刺激に反応することができるバイオニック義足や人工生物を開発するためのバイオメカニクスの応用をリードしています。また、外骨格技術の向上により、運動能力が低下している人の運動能力を向上させ、重度の活動を行う際の身体能力を向上させることが可能となる。

製品を見る
生体力学 UNITS
73-108 を表示中 合計 109 商品
UNIT FOR STUDYING DEFORMATION OF TRUSSES - MFCS3
  • MFCS3
Available
7.1.6.- 構造メカニズム
MFCS3
トラスひずみ測定実験装置
The Unit for studying Deformation of Trusses, "MFCS3", allows the measurement of the stresses in the bars in different types of trusses, and the study of the dependence of the external force and the comparison of the experimental forces in the...
TWO HINGED ARCH UNIT - MFL
  • MFL
Available
7.1.6.- 構造メカニズム
MFL
2ピンアーチ実験装置
The Two Hinged Arch Unit, "MFL", designed by EDIBON allows to study the response of an arched beam when an external load is applied on it.The arch is supported on two supports, a fixed one and a movable one. The displacement and horizontal...
PORTAL FRAME UNIT - MPO
  • MPO
Available
7.1.6.- 構造メカニズム
MPO
ポータルフレーム実験装置
The Portal Frame Unit, "MPO", allows to perform vertical deflection and horizontal deflection measurements in a fixed rectangular portal frames.To carry out the deflection tests, a series of loads with different weight must be applied to the...
STRESS HYPOTHESES UNIT - STH
  • STH
Available
7.1.6.- 構造メカニズム
STH
Stress Hypotheses Unit
The Stress Hypotheses Unit, "STH", allows the study and testing of stress hypotheses by applying loads in different directions on a test specimen point and measuring the deformations produced.Normal and shear stresses are applied, avoiding...
SIMPLE STABILITY PROBLEMS STUDY UNIT - MEPE
  • MEPE
Available
7.1.6.- 構造メカニズム
MEPE
単純安定性課題分析実験装置
The Simple Stability Problems Study Unit, "MEPE", has been designed to study the stability of a bar subjected to buckling by obtaining the critical load in different configurations. The unit consists of two bars of same length connected by a...
UNIT FOR STUDYING METHODS TO DETERMINE THE ELASTIC LINE - MDLE
  • MDLE
Available
7.1.6.- 構造メカニズム
MDLE
弾性ライン測定分析実験装置
The Unit for studying Methods to Determine the Elastic Line, "MDLE", consists of set of beams, several supports (with clamp fixing and dial gauges, and with force gauge), a device to generate a bending moment, fixed pulleys, dial gauges and a set...
UNIT TO STUDY STRESS ON A MEMBRANE - SSM
  • SSM
Available
7.1.6.- 構造メカニズム
SSM
Unit to Study Stress on a Membrane
The Unit to Study Stress on a Membrane, "SSM", designed by EDIBON, allows the study of stresses and deformations in a thin disc or membrane subjected to different compressive stresses.The main element of the equipment is a thin disc or membrane...
UNSYMMETRICAL CANTILEVER UNIT - MVV
  • MVV
Available
7.1.6.- 構造メカニズム
MVV
非対称カンチレバー実験装置
The system consists of a vertical cantilever rigidly clamped at its lower end to the main column which is attached to a rigid structure. Beams of different sections may be used.A loading head, located at the upper end of the column, can rotate...
DEFLECTION OF CURVED BARS UNIT - MDB
  • MDB
Available
7.3.2.1.- 機械的試験
MDB
湾曲棒たわみ実験装置
The Deflection of Curved Bars Unit "MDB" consists of a structure of aluminum and steel that allows the incorporation of different curved bars to be studied. It allows tests with curved bars of different shape.The use of two dial gauges placed...
BEAM DEFLECTION UNIT - MFV
  • MFV
Available
7.3.2.1.- 機械的試験
MFV
梁たわみ実験装置
The Beam Deflection Unit, "MFV" has been designed to enable the students to observe and study the following phenomena in simply supported beams and cantilever beams:Relation between the deflections and the applied loads.Effect of the length and...
STRUT BUCKLING UNIT - MFLT
  • MFLT
Available
7.3.2.1.- 機械的試験
MFLT
棒鋼の座屈を研究する機械
The Strut Buckling Unit "MFLT" allows the student to obtain experimentally the buckling critical load of slender struts subjected to compression.The unit allows to study the buckling of pieces of different lengths, ranging from 300 mm. to 625 mm.,...
PHOTOELASTICITY UNIT - EFO
  • EFO
Available
7.3.1.- 光弾性とひずみ測定
EFO
光弾性実験装置
Unit for photoelasticity practices, illustrating the subjects of the Photoelasticity theory, the Elasticity theory, Strength of Materials, and Structure theory.It is very suitable for the introduction and study of photoelasticity: optical...
UNIT FOR DETERMINING THE GAUGE FACTOR OF STRAIN GAUGES - MFGE
  • MFGE
Available
7.3.1.- 光弾性とひずみ測定
MFGE
ひずみゲージファクター測定実験装置
The Unit for Determining the Gauge Factor of Strain Gauges, "MFGE", allows to determine the k factor of strain gauges.The bar rests on two supports with ball bearings, so that it is possible to work with a load under pure bending.To perform such...
STRAIN GAUGE TRAINING UNIT - MEGE
  • MEGE
Available
7.3.1.- 光弾性とひずみ測定
MEGE
ひずみ計測 演習装置
The Strain Gauge Training Unit, "MEGE", provides an introduction to the fundamentals of measurement with strain gauges, to compare how resistance strain gauges work and how they measure strains in different structures (torsion, tension and bending...
PHOTOELASTIC STRESS DEMONSTRATION UNIT - PSD
  • PSD
Available
7.3.1.- 光弾性とひずみ測定
PSD
Photoelastic Stress Demonstration Unit
The Photoelastic Stress Demonstration Unit, "PSD", consists of a frame on which the test specimens are placed. The specimens are made of a special transparent material that has a double optical refraction effect under the action of a mechanical...
UNIVERSAL MATERIAL TESTING UNIT - EEU/20KN
  • EEU/20KN
Available
7.3.2.1.- 機械的試験
EEU/20KN
ユニバーサル素材試験装置
The Universal Material Testing Unit, "EEU/20KN", is a didactic bench-top universal material testing unit. It is distinguished by its rigid construction, accurate control and a precise hydraulic system to apply loads of up to 20 kN, which enables...
BRINELL HARDNESS TESTING UNIT - EEDB
  • EEDB
Available
7.3.2.1.- 機械的試験
EEDB
ブリネル硬さ試験装置
The Brinell Hardness Testing Unit, "EEDB", is a hardness tester that determines Brinell hardness in metals, hard alloys, tempered steels, etc. Besides, it can be used with other materials, such as rigid plastics, bakelite, etc.A penetrating ball...
CREEP TESTING UNIT - EEFCR
  • EEFCR
Available
7.3.2.1.- 機械的試験
EEFCR
クリープ試験装置
The Creep Testing Unit, "EEFCR", for the creep testing is mounted on a structure of aluminum profiles which a painted steel panel is supported on.The "EEFCR" unit is designed to carry out experiments on specimens of plastic materials. Due to the...
COMPUTER CONTROLLED FATIGUE TESTING UNIT - EEFC
  • EEFC
Available
7.3.2.1.- 機械的試験
EEFC
コンピューター制御疲労試験装置
The Computer Controlled Fatigue Testing Unit, "EEFC", designed by EDIBON, allows to study the fatigue strength of the materials. For that purpose, fatigue tests are performed with different materials and notches.Optionally, with the additional...
FATIGUE TESTING UNIT - EEF
  • EEF
Available
7.3.2.1.- 機械的試験
EEF
疲労試験装置
The Fatigue Testing Unit, "EEF", designed by EDIBON, allows to study the fatigue strength of the materials. For that purpose, fatigue tests are performed with different materials and notches.Optionally, with the additional recommended element Set...
EULER BUCKLING MODES UNIT - MEBM
  • MEBM
Available
7.3.2.1.- 機械的試験
MEBM
Euler Buckling Modes Unit
With the Euler Buckling Modes Unit, "MEBM", the four Euler buckling cases are demonstrated, for which four elastic bars are fixed or supported in a frame and subjected to compression load with a system of weights.The elastic bars can be free or...
TORSION AND BEND UNIT - MTP
  • MTP
Available
7.3.2.1.- 機械的試験
MTP
ねじり曲げ実験装置
The Torsion and Bend Unit, "MTP", is a combined apparatus for the demonstration of both torsion and bend to be used in the laboratory or as a complement of the theoretical study about torsion and bend. Its size and weight facilitate its transport...
TORSION UNIT - MTB
  • MTB
Available
7.3.2.1.- 機械的試験
MTB
トーション実験装置
The Torsion Unit, "MTB", allows to verify the basis of torsion and to perform practical exercises to demonstrate:Circular rods elastic torsion equation.The rigidity modulus of different materials.To perform the tests a metallic rod is fastened by...
TORSION TEST UNIT (30NM) - MTT
  • MTT
Available
7.3.2.1.- 機械的試験
MTT
Torsion Test Unit (30Nm)
To perform the tests, the test specimen is clamped and twisted by means of a flywheel and a worm gear until it breaks. The force is gradually applied to the specimen to observe the elastic strain produced. The specimen will deform and manifest...
TENSILE TESTER UNIT - MTTU
  • MTTU
Available
7.3.2.1.- 機械的試験
MTTU
Tensile Tester Unit
With the Tensile Tester Unit, "MTTU", tensile test can be performed. A specimen made of different materials is subjected to an increasing axial tensile stress till failure. This unit allows the user to perform tensile tests with different...
リクエスト情報