ベストセラー

685-720 を表示中　合計 950 商品

Available

7.4.3.- 設置および保守の慣行

MDU

機械診断

The family of Machine Diagnosis Unit, "MDU", of EDIBON, allows you to perform vibration measurement practical exercises, measuring the displacement, velocity and acceleration of vibrations in the time-frequency range.The MDU Base Unit, "MDU-UB",...

COMPUTER CONTROLLED PHOTOELASTICITY UNIT - EFOC

EFOC

Available

7.3.1.- 光弾性とひずみ測定

EFOC

歪みゲージ測定システム付き光弾性実験装置

The Computer Controlled Photoelasticity Unit, "EFOC", has been designed by EDIBON for photoelasticity practices, illustrating the subjects of the photoelasticity theory, the elasticity theory, strength of materials, and structure theory.It is very...

UNIT TO STUDY GEAR TRAIN ASSEMBLY - MGTA

MGTA

Available

14.1.2.2.- ギア

MGTA

歯車トランスミッション取り付け装置

The Study Gear Train Assembly Unit, "MGTA", designed by EDIBON, allows to perform diverse assemblies of gearboxes. The student will essentially learn the practice of assembling gear components in transmissions and will be introduced to the...

ASSEMBLY AND MAINTENANCE OF A GEAR PUMP UNIT - AMGP

の付属品 AMP

Available

8.9.2.- 取り外し可能なモデル

AMGP

歯車ポンプ取り付けと保守装置

の付属品 AMP

The gear pumps belong to the group of positive displacement, rotary piston pumps, which produce flow by transporting the fluid betweenthe teeth of two coupled gears. One of them is driven by the shaft of the pump (driving shaft), which turns the...

AIR FLOW TEMPERATURE CONTROL MODULE - RYC-TAR

の付属品 RYC, RYC/T

Available

6.1.1.1.- 理論的-実践的基礎

RYC-TAR

気流の温度のPID制御・調整装置

の付属品 RYC, RYC/T

The PID Temperature Control and Regulation of Air Flow Unit, "RYC-TAR", designed by EDIBON, allows studying temperature control in an air flow using a fan and a heating element. It includes sensors distributed along the duct, allowing analysis of...

HECA

Available

8.8.- 流体配管システム

HECA

気流学習実験装置

The Air Flow Studies Unit, "HECA", designed by EDIBON, is a floor standing unit that allows to measure different characteristics of air distribution systems and to demonstrate certain basic principles of fluid mechanics in ducts and jets.The unit...

の付属品 RYC, RYC/T

Available

6.1.1.1.- 理論的-実践的基礎

RYC-N

水位のPID制御・調整装置

の付属品 RYC, RYC/T

The PID Level Control and Regulation Unit, "RYC-N", designed by EDIBON, allows studying level control in a tank by regulating the inlet flow. It includes level sensors, a pump, and valves that allow modifying operating conditions. The unit allows...

FLUID FRICTION IN PIPES UNIT, WITH HYDRAULICS BENCH (FME00) - AFT

Available

8.8.- 流体配管システム

AFT

水力ベンチ付き管摩擦装置 (FME00)

The unit Fluid Friction in Pipes Unit, with Hydraulics Bench (FME00), "AFT", contains six straight pipe sections made of different materials and with different diameters and roughness. Additionally, a wide range of accessories are included for the...

HYDROELECTRIC ENERGY POWER PLANT - PWP-HE

の付属品 AEL-MGP

Available

5.2.- MICROGRIDS

PWP-HE

水力発電所

の付属品 AEL-MGP

The Hydroelectric Energy Power Plant, "PWP-HE", designed by EDIBON, allows for the study of hydroelectric power plants within the context of microgrids.Hydroelectric power plants have a great capacity to supply energy at certain times of maximum...

HYDROELECTRIC POWER PLANTS SIMULATOR - PSV-HPPS-SOF

の付属品 PSV-PPSS

Available

5.1.3.1.- 発電

PSV-HPPS-SOF

水力発電所シミュレーター

の付属品 PSV-PPSS

Energy generation from water flows is the most exploited renewable energy source in the world for obtaining electricity, due to its simplicity of operation and its adaptability to different environments. The orography of the terrain is essential...

FME00

Available

8.1.1.- ベースユニット

FME00

水圧ベンチ

The Hydraulics Bench, "FME00", designed by EDIBON, allows the study of fluid behaviour, hydraulic theory and the properties of fluid mechanics.It is formed by a movable hydraulics bench used to hold a wide variety of modules, which allow the...

FME38

Available

8.1.6.- 油圧機械: ポンプ

FME38

水圧ラムポンプ

The Hydraulic Ram Pump, "FME38", designed by EDIBON, utilizes the water hammer effect to raise water to a higher level than its power source. It operates by harnessing the rapid change in water velocity in a pipe that occurs when its flow is...

HORIZONTAL OSBORNE REYNOLDS DEMONSTRATION - FME31

FME31

Available

8.1.5.- 流れの可視化

FME31

水平型オズボーン-レイノルズ現象デモンストレーション装置

The Osborne Reynolds Horizontal Demonstration unit, "FME31", designed by EDIBON, allows to study the characteristics of a liquid flowing through a pipe and the Reynolds number in each of the liquid states.The FME31 unit makes it possible to study...

HYDROLOGIC SYSTEMS, RAIN SIMULATOR AND IRRIGATION SYSTEMS UNIT (2X1 M) - ESH(2x1m)

ESH(2x1m)

Available

13.1.- 水文地質学と水文地質学

ESH(2x1m)

水循環システム・降雨シミュレーター・灌漑システム実験装置（2x1m)

The Hydrological Systems, Rainfall Simulator and Irrigation Systems (2x1 m), "ESH(2x1m)", has been designed by EDIBON to demonstrate some of the physical processes encountered in hydrology and fluvial geomorphology. This includes rainfall...

FME15

Available

8.1.8.- 油圧パイプ

FME15

水撃実験装置

With the Water Hammer unit, "FME15", designed by EDIBON, we can demonstrate the effects of the instantaneous or gradual variation of the velocity of a fluid.The water hammer phenomenon, which appears as a consequence of a rapid change in the...

WATER FLOW TEMPERATURE CONTROL MODULE - RYC-TAG

の付属品 RYC, RYC/T

Available

6.1.1.1.- 理論的-実践的基礎

RYC-TAG

水流の温度のPID制御・調整装置

の付属品 RYC, RYC/T

The PID Temperature Control and Regulation of Water Flow Unit, "RYC-TAG", designed by EDIBON, allows analyzing heat transfer in a water flow system. It includes two circuits (cold and hot water) connected through a heat exchanger. It allows...

HYDROGEN BUBBLE FLOW VISUALIZATION UNIT - UVF

Available

8.4.- 流れの可視化

UVF

水素気泡フロー可視化実験装置

The Hydrogen Bubble Flow Visualization Unit, "UVF", designed by EDIBON, is a self-contained unit designed to study different flow patterns through the hydrogen bubble flow visualization technique.Bubbles are generated by electrolysis by the...

FME02

Available

8.1.2.- 測定

FME02

水門流実験装置

The Flow over Weirs unit, "FME02", designed by EDIBON, has many elements that are used in combination with the Hydraulics Bench (FME00):A special mouthpiece is coupled to the outlet mouthpiece for water in the Hydraulics Bench (FME00).Two soothing...

WIND POWER APPLICATION WITH PERMANENT MAGNETS SYNCHRONOUS GENERATOR - AEL-WPT

AEL-WPT

Available

5.3.3.- 風力エネルギー

AEL-WPT

永久磁石同期ジェネレータを備えた風力発電のアプリケーション

The Wind Power Application with Permanent Magnets Synchronous Generator, "AEL-WPT", has been designed by EDIBON to train the students in the main operations of wind turbines.Considering the above, this application allows experimental investigation...

WIND POWER APPLICATION WITH PERMANENT MAGNETS SYNCHRONOUS GENERATOR, WITH SCADA - AEL-WPTC

AEL-WPTC

Available

5.3.3.- 風力エネルギー

AEL-WPTC

永久磁石同期ジェネレータを備えた風力発電のアプリケーション、SCADA付き

The Wind Power Application with Permanent Magnets Synchronous Generator, "AEL-WPTC", has been designed by EDIBON to study the conversion of wind energy into electrical energy by means of a permanent magnet synchronous generator. This application...

Available

11.1.11.- ろ過、沈降および混合

PDS

沈殿タンク

The Sedimentation Tank, "PDS", is a teaching unit, designed by EDIBON, to demonstrate the sedimentation process and to familiarize with the settling principle of discrete particles settling into a tank. It will also allow to study the hydraulic...

ESED

Available

11.1.11.- ろ過、沈降および混合

ESED

沈殿学習装置

The Sedimentation Study Unit, "ESED", designed by EDIBON, allows studying and compare the sedimentation processes of several suspensions simultaneously.It is formed by three sedimentation methacrylate cylinders mounted vertically on a panel,...

SEDIMENT TRANSPORT DEMONSTRATION CHANNEL - CAS

Available

13.1.- 水文地質学と水文地質学

CAS

沈殿物輸送実演流路

The Sediment Transport Demonstration Channel, "CAS", designed by EDIBON, consist of an inclinable channel mounted on a base plate, supported by two supports, with a discharge tank and recirculating pump. This tank is in the Basic Hydraulic Feed...

Available

13.1.- 水文地質学と水文地質学

RFS

河川流量シミュレーター

The River Flow Simulator, "RFS", designed by EDIBON, allows the simulation and study of the river features, included the flow and solid bed load motion.The main element is a rectangular tank made of stainless steel supported on a metal beam frame,...

TCEB

Available

11.1.3.- 沸騰

TCEB

沸騰熱伝導実験装置

The Boiling Heat Transfer Unit, "TCEB", designed by EDIBON, consists of a heating element horizontally mounted inside a vertical glass chamber submerged in coolant. This heating element is connected to a cylindrical copper sleeve in contact with...

HYDRAULIC AND ELECTRO-HYDRAULIC APPLICATION - AE-HD

AE-HD

Available

6.1.3.1.- 油圧

AE-HD

油圧および電気油圧アプリケーション

The Hydraulic and Electro-Hydraulic Application, "AE-HD", designed by EDIBON, is a modular unit consisting of a great variety of optional kits and elements to configure the desired Hydraulic and Electro-Hydraulic circuit.The optional hydraulic...

FLUID FRICTION IN PIPES UNIT, WITH BASIC HYDRAULICS FEED SYSTEM (FME00/B) - AFT/B

AFT/B

Available

8.8.- 流体配管システム

AFT/B

油圧グループ付き管摩擦装置 (FME00/B)

The Fluid Friction in Pipes Unit, with Basic Hydraulics Feed System (FME00/B), "AFT/B", is designed to determine the friction coefficient in pipes of several diameters and roughness, to study the pressure losses in different types of valves and...

AERODYNAMIC TUNNEL FOR FLOW VISUALIZATION - TAVF180/100

TAVF180/100

Available

8.4.- 流れの可視化

TAVF180/100

流れの可視化用空気力学トンネル

The Flow Visualization Aerodynamic Tunnel, "TAVF180/100", designed by EDIBON, consists of a vertical conduction in which an upward flow of air and smoke is induced, which passes through different models allowing to study the behavior of the flow...

Available

8.5.- 油圧チャンネル

CFG

流体チャネル

Channel made up of group of modular parts of 2.5 m long. Each rectangular piece of different sections with transparent walls of 10 mm thick is made in such a way that guarantees a uniform section along the entire channel. All the sections are made...

COMPUTER CONTROLLED FLOW CHANNELS - CFGC

CFGC

Available

8.5.- 油圧チャンネル

CFGC

流体チャネル、コンピューター（PC）から制御"

The Computer Controlled Flow Channels, "CFGC", are hydrodynamic channels to perform multiple hydraulic tests. They consist of a rectangular section channel with tempered glass transparent walls through which water flows. Water is impelled by a...

FME25

Available

8.1.5.- 流れの可視化

FME25

流体チャネル、長さ：1 m

The Flow Channel, length: 1 m unit, "FME25", designed by EDIBON, allows to studying the behaviour of water flowing through a one-meter channel.It basically consists of a channel of rectangular cross section with transparent walls, through which...

FLOW CHANNELS (SECTION: 80 X 300 MM) - CF

Available

8.5.- 油圧チャンネル

流体チャネル（セクション：80X300ミリメートル）

Channel, through which water flows, of rectangular section with transparent walls that enable to observe all the experiments. Water is taken from the storage tank by means of a hydraulic pump and, by the pipe, it is driven to the inlet tank, where...

COMPUTER CONTROLLED FLOW CHANNELS (SECTION: 80 X 300 MM) - CFC

Available

8.5.- 油圧チャンネル

CFC

流体チャネル（セクション：80X300ミリメートル）、コンピューター（PC）から制御

Channel, through which water flows, of rectangular section with transparent walls that enable to observe all the experiments. Water is taken from the storage tank by means of a hydraulic pump, with speed regulation, and, by the pipe, it is driven...

FME35

Available

8.1.3.- 静水圧

FME35

流体特性実験

The Fluid Properties unit, "FME35", designed by EDIBON, allows the study of the fluids fundamental properties that affect their behavior in practical applications.We can study capillarity, density and relative density (specific gravity), buoyancy...

FME34

Available

8.1.2.- 測定

FME34

流体静力学およびマノメータ

The Fluid Statics and Manometry unit, "FME34", designed by EDIBON, allows the study of static fluids and manometry providing the user with an introduction in the behavior of liquids under hydrostatic conditions (fluids at standstill) and the...

HYDROSTATICS BENCH & FLUID PROPERTIES - BHI

Available

8.3.- 静水圧

BHI

流体静力学ベンチ＆流体特性実験装置

The Hydrostatics Bench and Fluid Properties, "BHI", is a compact, mobile and independent unit.There is a water storage tank, to work in a closed system, at the bottom of the bench. The water is distributed by hand pumps from this tank to two upper...

その他の情報については, お問い合わせください