The purpose of this application is to demonstrate the importance of energy storage in isolated environments. In this case, it is a sophisticated application in charge of storing kinetic energy through a flywheel. It has a bidirectional inverter...

The Freeze-Dryer, "BLIO", is able to carry out the freeze-drying process for the drying of different products inside a transparent chamber that allows the control of the pressure, and on heatable trays that allow to control the temperature of the...

The Geared Study Drive Unit, "MESE", has been designed by EDIBON to dynamic study of different gears, including a standard three shaft gear train for study, which can be modified with a simple setting to obtain a simple transmission.For the...

The GPS Unit, "EGPS", designed by EDIBON, has been developed for the study of basic concepts about global positioning systems. The unit allows to acquire a solid knowledge about how a GPS receiver works, not needing any prior knowledge.The "EGPS"...

The "THER" consists of a refrigeration circuit, with the most common heat exchangers in refrigeration circuits. All the elements are clearly mounted in the front panel of the unit. The evaporator is an air cooling finned tube heat exchanger and a...

The High Voltage Laboratory System "HVLS" is formed by a base unit and three optional test kits some optional made with highest precision to build different configurations in order to carry out high AC Voltage Tests, DC Voltage Tests and Impulse...

The Hydraulic and Electro-Hydraulic Application, "AE-HD", is a modular unit consisting of a great variety of optional kits and elements to configure the desired Hydraulic and Electro-Hydraulic circuit.The optional hydraulic kits available with the...

The Hydraulic Radiator Balancing Training Unit, "THBT", allows the study of the amount of water with which to guarantee that all the radiators of an installation are supplied with sufficient hot water.The hydraulic balancing is carried out by...

The purpose of this application is the study of hydroelectric power plants in the context of micro grids. Hydroelectric power plants have a great capacity to supply energy at certain times of maximum demand due to their rapid response. Therefore,...

The Hydrological Studies Unit, "ESH(2x1m)/S", has been designed by EDIBON to enable autonomous work in the study of water behavior within the soil. A wide variety of experiments can be conducted thanks to the specifications of the unit.The unit...

The Computer Controlled Teaching Unit for the Study of Power Electronics (with IGBTS), "TECNEL" is a unit with Computer Control and Data Acquisition System designed to study the basis of Power Electronics. It allows students to study AC/DC, DC/AC,...

The "AE-PLC-CPI" application is a unit that includes different technologies to carry out four control loops in closed loop: flow, level, temperature and pressure. A flexible system of ball valves and pipe connections makes the configuration of the...

The Inertia Flywheel Unit, "MIF", consists of an inertia disc with a rotation shaft at the center of the disc.The shaft is supported at two points by bearings.A cord is attached by one of the ends to the shaft and wound around it. At the other end...

The Instantaneous Gas Heater Trainer, ,IGHT,, designed by EDIBON, is a training unit with wheels to facilitate its mobility that represents a gas heater training system. The unit operates with air, simulating the operation of the heater, so it can...

The Introduction to Refrigeration Unit, "TIR", is a unit with exchangeable sets in which the components are mounted on plates and quickly connected by flexible hoses.The unit consists of a frame with a compressor, a refrigerant accumulator tank to...

The Laboratory Scale Pressure Swing Adsorption Unit, "LPSA", is a laboratory scale plant that allows the performance of adsorption tests using the pressure swing technique.The LPSA unit allows to synthesize a mixture of gases coming from four...

The LAN Network Unit, "ELAN", has been designed to study the most widely used networks: LAN networks. The unit allows students to acquire knowledge related to the structure and topology of LAN networks, cabling standards and how to configure...

It is the supporting structure where the modules’s elements are mounted in order to undertake the experiments and hence, the basepanel is necessary along with any module.The panel is pierced with equidistant holes that help students to take...

The Measurement and Regulation Station Trainer,"MRST", designed by EDIBON is a totally accessible bench-top unit. The unit works with an air compressor that simulates the gas flowing inside the pipes (air testing), allowing to check the tightness...

The Mesh in Pipe Unit, "AMT/P", consists of a Pipe network, a lateral panel where all the elements to test are located and a hydraulics bench, which has all the elements and accessories required for the unit to work autonomously.The valves that...

Operational amplifiers are compact, active, linear and high-gain devices designed to provide the desired transfer function. An operational amplifier consists of an electronic circuit having two inputs and one output. The output is the difference...

Optoelectronics is the link between optical systems and electronic systems. Optoelectronic components are those whose operation is directly related to light.They are semiconductor devices capable of producing light radiation within the human...

Oscillators operation is usually very similar in all of them: the oscillating circuit produces an oscillation, then the amplifier increases it and finally the feedback network takes a part of the energy from the oscillating circuit and introduces...

The "N-EM" are a series of emulators that provide the students the required hardware to emulate the most common automatic systems.The "N-EM" modules are designed to work with the "AE-PLC" units to obtain the fundamental knowledge of PLC...

The PANASONIC PLC Application, "AE-PLC-PAN", is a PLC unit designed by EDIBON which use one of the last PANASONIC PLC units. It allows the user to learn about PLC logic programming, different PLC programming languages, PLC to PC communication,...

The PEM Fuel Cell Unit, "EC5B", has been designed to allow the students to understand the fuel cells technology, especially that of a proton exchange membrane fuel cell (PEM). It also enables to calculate several fundamental parameters of a PEM...

The PEM Fuel Cell Advanced Unit, "EC6B", has been designed to allow the students to understand the fuel cells technology, especially that of a proton exchange membrane fuel cell (PEM). It also enables to calculate several fundamental parameters of...

The Photoelastic Stress Demonstration Unit, "PSD", consists of a frame on which the test specimens are placed. The specimens are made of a special transparent material that has a double optical refraction effect under the action of a mechanical...