Are you a teacher or do you work as an engineering researcher? EDIBON offers courses for teachers and #research staff. Take a look at the course Basic Mechanics and learn about #forces and vectors. #DiscoverEdibon #Engineering.
MESE-T Geared Study
革新的なシステム
The Geared Study Drive Unit, "MESE", has been designed to dynamically study different gears, including a standard three shaft gear trainfor study, which can be modified with a simple setting to obtain a simple transmission.
関連ニュース
概要
The Geared Study Drive Unit, "MESE", has been designed to dynamically study different gears, including a standard three shaft gear trainfor study, which can be modified with a simple setting to obtain a simple transmission.
For the dynamic study the transmission under study will be arranged and the motor that provides power to the input of the transmission andthe dynamometer brake located at the output of the transmission to provide the braking force at the output will be activated.
The motor connected at the input of the transmission regulates the rotation speed, the dynamometer brake connected at the output of thetransmission uses the electromagnetic braking effect and the hysteresis to work at a constant torque regardless the input speed and load.
The sensors, located in the motor and the dynamometer brake, measure the speed and torque of the input and output shafts and, therefore,their power. The performance and efficiency of the transmission under study will be obtained with those data.
The couplings for the transmission, motor and dynamometer brake are quick and easy, flexible clamps are used. The unit is properlyventilated to avoid overheating problems. To avoid contact with the unit in operation, it’s protected while allowing the student to observethe process.
There are other additional recommended elements (not included) in the Geared Study Drive Unit, "MESE", for the study of other gears,such as Toothed Belt Drive, "MESE/1", Round Belt Drive, "MESE/2", Chain Drive, "MESE/3" and Helical Gear Drive, "MESE/4".
Additionally, the Statics and Inertia Test Module, "MESE/SI", studies the angular acceleration and the static efficiency. The static studycan be carried out thanks to a set of weights used to apply rotation forces to the shaft of an inertia flywheel included or to the gear trainof the Geared Study Drive Unit, "MESE". The "MESE/SI" module includes a sensor for measuring angular acceleration. Thus, inertia isexperimentally studied.
The Statics and Inertia Test Module, "MESE/SI", is an independent accessory that does not require the Geared Study Drive Unit, "MESE"to carry out the practical exercises. Although this unit would provide the three-axle gear train, to expand its functionality and increasepractical possibilities.
演習と指導の慣行
マニュアルに含まれるガイド付き実習
- Study of simple and compound gear systems.
- Dynamic study, efficiency and speed of simple gear trains.
- Dynamic study, efficiency and speed of compound gear trains.
- Characteristics of the gear systems.
より実用的な練習をして、ユニットを完成させる
- Study of different types of drives.
- Dynamic study, efficiency and speed of different types ofdrives.
- Study of the angular speed of the drive systems (included theaccessory MESE/SI).
- Static study of the gear systems (included the accessoryMESE/SI).
- Study of inertia flywheels (included the accessory MESE/SI).
- Experimental calculation of inertia and mass moments(included the accessory MESE/SI).
- Study of toothed belt drives (included the accessory MESE/1).
- Study of round belt drives (included the accessory MESE/2).
- Study of chain drives (included the accessory MESE/3).
- Study of helical gear drives (included the accessory MESE/4).
- Comparison of different gear systems (included the accessoryMESE/4).
- Several other exercises can be done and designed by the user.
補完的な機器
14.1.2.2.- ギア
MTSF
The Worm and Wheel Unit, "MTSF", allows to demonstrate the principle of a worm gear.The unit consists in a worm and a wheel. These parts are mounted on ball bearings and fixed to a vertical panel.The worm and wheel are positioned a set distance...
14.1.2.2.- ギア
MAE
ギアシステム加速実験装置
The Acceleration of Geared Systems Unit "MAE" allows to perform tests to calculate the moment of inertia of a gear train system.The MAE unit includes six gears. Two of them can have another position in the shafts to vary the gear ratio, allowing...
14.1.2.2.- ギア
MSDA
単純トランスミッション取り付け装置
The Simple Drives Assembly Unit, "MSDA", allows the knowledge and learning of the fundamentals of the mechanical transmission technique, as well as the assembly, disassembly and experimentation with simple gears.The unit allows to carry out...
14.1.2.2.- ギア
MCDA
組み合わせトランスミッション取り付け装置
The Combined Drives Assembly Unit, "MCDA", allows carrying out advanced exercises and provides an understanding of the significant components and arrangements of the mechanical drive technology.With this unit, practices can be carried out to...
14.1.2.2.- ギア
MGTA
歯車トランスミッション取り付け装置
The Unit to Study Gear Train Assembly, "MGTA", allows to perform diverse assemblies of gearboxes. The student will essentially learn the practice of assembling gear components in transmissions and will be introduced to the technique of mechanical...
14.1.2.2.- ギア
MGE
ギアジェネレーション実験装置
The Gear Generation Unit, "MGE", has been designed by EDIBON to study rack and pinion systems. With this unit the student can draw by an easy procedure the profile of a tooth, produced by the involute process of the rack when passing over the...
14.1.2.2.- ギア
MEE
ギアリフティングマシン
The Geared Lifting Unit, "MEE", has been designed to study a simple lifting mechanism and its use to determine the speed ratio, its mechanical advantages and efficiency.The unit is mounted on a metal structure with bearings that support the gear...
7.1.2.2.- ギア
KSGT
Unit for the Kinematic Study of Gear Trains
The Unit for the Kinematic Study of Gear Trains, "KSGT", unit includes a pivoting rail with a fixed axle to which two more axles can be fixed in any position in function of the feature to study.The cogwheels may be assembled on the axles in...
品質

アフターサービス
