2.- ELECTRONICS

Electronics is the branch of physics focused on the behavior of electrons. In engineering, electronics is the part that studies and develops electronic circuits so that the electrons circulating through them have the behavior required by the specifications of the application.

View more

Electronics has been one of the most developed disciplines throughout the 20th century, going from having a very limited application as power supplies to having a great impact on society. Some examples of key electronic applications to understand this great influence are the sensors and meters of all kinds of physical quantities such as pressure level, flow level and temperature measurement, the use of electronic amplifiers and filters, the development of integrated circuits, microprocessors and personal computers, the development of transistors of different technologies such as MOSFET, JFET, BJT, IGBT, etc.

Electronics applications are almost endless, and new contributions are improved and added each year. Depending on the application of the electronic circuits the following groups are differentiated: analog electronics and digital electronics depending on whether binary or analog signals are used, power electronics depending on whether high electric currents and electric voltages are used, electronic instrumentation depending on whether they are used to make electronic measurements of physical quantities, etc.

The future of electronics focuses on the miniaturization of electronic components, increasing their efficiency and speed. In this work, the discovery of revolutionary new materials, such as graphene or silicene, is of key importance.

View Products
Related Materials
ELECTRONICS SUBCATEGORIES

2.1.- POWER SUPPLIES, MEASUREMENT EQUIPMENT AND ACCESSORIES

The electronic laboratory equipment is the set of instruments required to carry out the experimentation in a practical session of electronics. The characteristics of the equipment will depend on the theoretical level of the laboratory to be equipped, whether it is a technical high school, a...
View

2.2.- KITS FOR CIRCUITS ASSEMBLY

The electronic development phase of a device is a group of stages carried out to obtain a product that meets the required specifications.The most characteristic stages of any electronic device development are: defining the equipment specifications, designing the different electronic circuits that...
View

2.3.- THEORETICAL - PRACTICAL FUNDAMENTALS

The electronics fundamentals are the set of knowledge aimed at providing the student with a solid base to analyze and understand the general operation of the most common electronic circuits, and the individual function of the electronic components that compose them.Acquiring a good theoretical...
View

2.4.- INDUSTRIAL ELECTRONICS

Industrial electronics is a branch of electronic engineering that focuses on industrial-grade electronic systems. One of the most important branches of industrial electronics is power electronics, which is responsible for the development of electronic applications that control and regulate high...
View

2.5.- AUTOMOTIVE ELECTRONICS

Automotive electronics is the branch of electronic engineering focused exclusively on the development of electrical and electronic systems specially designed to be installed in the car. All the systems developed in automotive electronics are adapted to withstand the harsh operation conditions in...
View
ELECTRONICS UNITS
Showing 37-72 of 122 item(s)
ROTATIONAL SPEED & POSITION CONTROL - M47
  • M47
Available
14.2.1.5.- INSTRUMENTATION AND CONTROL
M47
Rotational Speed & Position Control
The unit is equipped with a DC motor whose rotation speed can be controlled by the supply voltage. The following sensors are arranged along the motor shaft: optical slot sensor, inductive sensor, infrared reflection sensor, Hall effect sensor,...
SOUND MEASUREMENTS - M48
  • M48
Available
14.2.1.5.- INSTRUMENTATION AND CONTROL
M48
Sound Measurements
With the Sound Measurement Unit, "M48", designed by EDIBON, different practices related to sound measurements can be carried out. The unit has three different types of components: two types of microphones and a loudspeaker.
APPLICATIONS OF TEMPERATURE AND PRESSURE MODULE - N-M49
  • N-M49
Available
2.3.5.- INSTRUMENTATION & CONTROL
N-M49
Applications of Temperature and Pressure Module
A transducer is a device that is capable of transforming or converting a certain type of input energy into a different one at the output. Depending on the application they have, the name itself will indicate the type of conversion it performs, for...
POWER ELECTRONICS MODULE - N-M9
  • N-M9
Available
14.2.1.6.- POWER ELECTRONICS
N-M9
Power Electronics Module
Semiconductors used in power electronics operate as switches and therefore it is interesting to know the conduction characteristics, switching and control methods.With Power Electronics Module, "N-M9", designed by EDIBON, the operation of MOSFET...
POWER SUPPLIES MODULE - N-M5
  • N-M5
Available
14.2.1.6.- POWER ELECTRONICS
N-M5
Power Supplies Module
With the Power Supplies Module "N-M5", designed by EDIBON, symmetrical voltage regulators, operation of fixed, symmetrical and switched-mode power supplies as well as rectification (conversion of an AC voltage to a DC voltage) can be studied.In...
SEMICONDUCTORS I KIT - M3/KIT
Available
2.2.- KITS FOR CIRCUITS ASSEMBLY
M3/KIT
Semiconductors I Kit
Accessory of M-KITS
With Semiconductors I Kit, "M3/KIT", designed by EDIBON, the basic concepts of diodes can be studied, at the same time as the student will be asked to carry out a series of assemblies on the practice board to consolidate his knowledge of PN-type...
SEMICONDUCTORS II KIT - M4/KIT
Available
2.2.- KITS FOR CIRCUITS ASSEMBLY
M4/KIT
Semiconductors II Kit
Accessory of M-KITS
With Semiconductors II Kit, "M4/KIT", designed by EDIBON, semiconductors can be studied by extending the knowledge acquired in the basic module "M3/KIT".
POWER SUPPLIES KIT - M5/KIT
Available
2.2.- KITS FOR CIRCUITS ASSEMBLY
M5/KIT
Power Supplies Kit
Accessory of M-KITS
With the Power Supplies Kit "M5/KIT", designed by EDIBON, symmetrical voltage regulators, operation of fixed, symmetrical and switched-mode power supplies as well as rectification (conversion of an AC voltage to a DC voltage) can be studied.
OSCILLATORS KIT - M6/KIT
Available
2.2.- KITS FOR CIRCUITS ASSEMBLY
M6/KIT
Oscillators Kit
Accessory of M-KITS
With the Oscillators Kit, "M6/KIT", designed by EDIBON, the different oscillators can be studied: RC and LC network oscillators, Wein bridge, Colpitts, Hartley and the astable multivibrator.
OPERATIONAL AMPLIFIERS KIT - M7/KIT
Available
2.2.- KITS FOR CIRCUITS ASSEMBLY
M7/KIT
Operational Amplifiers Kit
Accessory of M-KITS
With Operational Amplifiers Kit, "M7/KIT", designed by EDIBON, the different amplifiers can be studied: inverting, non-inverting, additive, differential and comparators.
FILTERS KIT - M8/KIT
Available
2.2.- KITS FOR CIRCUITS ASSEMBLY
M8/KIT
Filters Kit
Accessory of M-KITS
With Filters Kit, "M8/KIT", designed by EDIBON, the different types of filters can be studied: RC and LC, in "T" type configuration, active filters and also study associations of one and others in order to be able to practice with more complex...
POWER ELECTRONICS KIT - M9/KIT
Available
2.2.- KITS FOR CIRCUITS ASSEMBLY
M9/KIT
Power Electronics Kit
Accessory of M-KITS
With Power Electronics Kit, "M9/KIT", designed by EDIBON, the operation of MOSFET transistors, thyristors, TRIACs, etc. can be studied.
DIGITAL SYSTEMS AND CONVERTERS KIT - M10/KIT
Available
2.2.- KITS FOR CIRCUITS ASSEMBLY
M10/KIT
Digital Systems and Converters Kit
Accessory of M-KITS
With Digital Systems and Converters Kit, "M10/KIT", designed by EDIBON, the behaviour of BCD/Binary counters, comparators and analogue integrators can be studied, as well as analogue/digital conversion and viceversa.
DIGITAL ELECTRONIC FUNDAMENTALS KIT - M11/KIT
Available
2.2.- KITS FOR CIRCUITS ASSEMBLY
M11/KIT
Digital Electronic Fundamentals Kit
Accessory of M-KITS
With Digital Electronic Fundamentals Kit, "M11/KIT", designed by EDIBON, numbering systems, logic circuits, TTL gates, CMOS, Boolean algebra, etc. can be studied.
BASIC COMBINATIONAL CIRCUITS KIT - M12/KIT
Available
2.2.- KITS FOR CIRCUITS ASSEMBLY
M12/KIT
Basic Combinational Circuits Kit
Accessory of M-KITS
With Basic Combinational Circuits Kit, "M12/KIT", designed by EDIBON, encoders, decoders, multiplexers, demultiplexers, digital comparators and arithmetic and logical operations can be studied.
BASIC SEQUENTIAL CIRCUITS KIT - M13/KIT
Available
2.2.- KITS FOR CIRCUITS ASSEMBLY
M13/KIT
Basic Sequential Circuits Kit
Accessory of M-KITS
With Basic Sequential Circuits Kit, "M13/KIT", designed by EDIBON, all types of bistables, counters, flip-flops, synchronous sequential circuits and the operation of memories can be studied.
OPTOELECTRONICS KIT - M14/KIT
Available
2.2.- KITS FOR CIRCUITS ASSEMBLY
M14/KIT
Optoelectronics Kit
Accessory of M-KITS
With Optoelectronics Kit, "M14/KIT", designed by EDIBON, the main light emitters and liquid crystal displays (LCD), photoconductive cells, fibre optics, infrared, etc. can be studied.
ELECTRIC NETWORKS KIT - M16/KIT
Available
2.2.- KITS FOR CIRCUITS ASSEMBLY
M16/KIT
Electric Networks Kit
Accessory of M-KITS
With the Electric Networks Kit, "M16/KIT", designed by EDIBON, it is possible to understand the principles of Ohm’s Law, Norton’s and Thévenin’s Theorem, Wheatstone bridge operation, superposition theorems or star/delta transformation and viceversa.
THREE-PHASE CIRCUITS KIT - M18/KIT
Available
2.2.- KITS FOR CIRCUITS ASSEMBLY
M18/KIT
Three-phase Circuits Kit
Accessory of M-KITS
The Three-phase Circuits Kit, "M18/KIT", designed by EDIBON, is used to study the generation of three-phase systems, load balancing between phases, operation of three-phase rectifiers, etc.
COMPUTER CONTROLLED A/D AND D/A CONVERTERS UNIT - CADDA
  • CADDA
Available
14.2.1.3.- DIGITAL ELECTRONICS
CADDA
Computer Controlled A/D and D/A Converters Unit
The Computer Controlled A/D and D/A Converters Unit, "CADDA", unit has been designed to help the students to learn how to perform the most common procedures and study the different circuits used to convert analog signals in a digital signals and...
WEIGHING SYSTEM, WITH COMPUTER DATA ACQUISITION - SPC
  • SPC
Available
14.2.2.- INSTRUMENTATION AND CONTROL
SPC
Weighing System, with Computer Data Acquisition
The Weighing System, with Computer Data Acquisition "SPC" consist of a digital force meter that allows to determine both the mass and weight of a body (traction) as well as to determine compression forces.It has different adaptors according to the...
PRESSURE SENSORS CALIBRATION SYSTEM - SCSP
  • SCSP
Available
14.2.2.- INSTRUMENTATION AND CONTROL
SCSP
Pressure Sensors Calibration System
The Pressure Sensors Calibration System, "SCSP", is mainly composed of two pressure manometers on one hand, one measuring up to 1000 millimeters of water or 100 millibars and the other one measuring up to 2.5 bars and on the other hand, two vacuum...
MODULAR SYSTEM FOR THE STUDY OF SENSORS - BS
  • BS
Available
6.1.2.1.- SENSORS AND ELECTRONIC INSTRUMENTATION
BS
Modular System for the Study of Sensors
The Modular System for the Study of Sensors, "BS", designed by EDIBON, includes a wide range of units that include different electronic components designed to control the signal produced by the transducers (sensors and actuators) on the one hand,...
COMPUTER CONTROLLED BASE UNIT FOR BS - BSPC
  • Accessory of BS
Available
6.1.2.1.- SENSORS AND ELECTRONIC INSTRUMENTATION
BSPC
Computer Controlled Base Unit for BS
Accessory of BS
The BSPC is a complete unit designed to provide signal conditioning for many sensors and transducers output signals that must be conditioned before a data acquisition system can effectively and accurately acquire the signal. These circuits consist...
BASE UNIT FOR BS - BSUB
  • Accessory of BS
Available
6.1.2.1.- SENSORS AND ELECTRONIC INSTRUMENTATION
BSUB
Base Unit for BS
Accessory of BS
The BSUB is a complete unit designed to provide signal conditioning for many sensors and transducers output signals that must be conditioned. These circuits consist of differential and instrumentation amplifiers, filters, current to voltage and...
VIBRATIONS AND/OR DEFORMATIONS TEST MODULE - BS1
  • Accessory of BS
Available
6.1.2.1.- SENSORS AND ELECTRONIC INSTRUMENTATION
BS1
Vibrations and/or Deformations Test Module
Accessory of BS
Vibrations and/or Deformations Test Module, "BS1" has been designed to teach mechanical vibration and displacement variable measurement techniques.On the upper side of the test module there is a girder or elastic/vibrant sheet that is the one...
TEMPERATURE TEST MODULE - BS2
  • Accessory of BS
Available
6.1.2.1.- SENSORS AND ELECTRONIC INSTRUMENTATION
BS2
Temperature Test Module
Accessory of BS
The Temperature Test Module, "BS2", has been designed to teach the use and applications of sensors of temperature as a measure, and its control.We have a half-open space in whose interior there are two lamps that are going to heat that space....
Ask for information