2.3.- THEORETICAL - PRACTICAL FUNDAMENTALS

The electronics fundamentals are the set of knowledge aimed at providing the student with a solid base to analyze and understand the general operation of the most common electronic circuits, and the individual function of the electronic components that compose them.

Acquiring a good theoretical basis in a discipline as specialized as electronics is a necessary step for the subsequent design and development of complex electronic systems. Because electronics is also a branch of engineering, much of the theoretical concepts have a direct practical application, which greatly facilitates the comprehension of the concepts by the electronics student if the theoretical classes are taught with an associated practical example.

The electronics fundamentals cover a wide variety of topics, among them the analysis of electronic circuits (using equations and procedures such as Ohm's law, Kirchhoff's circuit laws, Thévenin's theorem, the superposition theorem, the transformation of the analyzed circuit to a simpler equivalent circuit, etc.), the study of basic components (resistors, inductors, capacitors, transistors of different technologies, diodes, thyristors, logic gates, etc.) and a set of circuits grouped by functionality (voltage power supply and current power supply, low-pass and high-pass filters, amplifier circuits, resistive circuits, different transistor polarization circuits, introduction to digital circuits, logic circuits, etc.).

View Products

THEORETICAL - PRACTICAL FUNDAMENTALS EQUIPMENT

Showing 13-24 of 31 item(s)

DIGITAL ELECTRONICS FUNDAMENTALS MODULE - N-M11

N-M11

Available

14.2.1.3.- DIGITAL ELECTRONICS

N-M11

Digital Electronics Fundamentals Module

Digital systems are systems for processing, treatment or transmission of information, in which such information is limited to take values in a discrete set. These signals (whose magnitude can only take one value from a discrete set of values) are...

BASIC COMBINATIONAL CIRCUITS MODULE - N-M12

N-M12

Available

14.2.1.3.- DIGITAL ELECTRONICS

N-M12

Basic Combinational Circuits Module

A combinational circuit is an electronic circuit in which the value of its outputs at a given instant, depends on the value of the inputs at the same instant. In other words, it is a circuit that has no memory. Combinational circuits work with...

BASIC SEQUENTIAL CIRCUITS MODULE - N-M13

N-M13

Available

14.2.1.3.- DIGITAL ELECTRONICS

N-M13

Basic Sequential Circuits Module

Logic gates and the circuits created with them constitute combinational logic, so called because the output only depends on the combination of the input variables present.There is a second group of logic circuits called sequential logic, so called...

N-M3

Available

14.2.1.4.- SEMICONDUCTORS

N-M3

Semiconductors I Module

Semiconductors are materials characterized by a resistivity lower than an insulator and higher than a conductor. There are different types of semiconductors, among which we could highlight diodes as extrinsic semiconductors (formed by more than...

N-M4

Available

14.2.1.4.- SEMICONDUCTORS

N-M4

Semiconductors II Module

To improve and extend the characteristics of the input signals, it is possible to use two or more transistors. Thus, you may want to build an amplifier in which you want to increase the input impedance without decreasing the gain. The solution to...

N-M14

Available

14.2.1.4.- SEMICONDUCTORS

N-M14

Optoelectronics Module

Optoelectronics is the link between optical systems and electronic systems. Optoelectronic components are those whose operation is directly related to light.They are semiconductor devices capable of producing light radiation within the human...

ELECTRONICS FOR MOTORS AND GENERATORS UNIT - M99-6

M99-6

Available

2.3.1.- BASIC ELECTRICAL LAWS CONCEPTS

M99-6

Electronics for Motors and Generators Unit

The Electronics for Motors and Generators Unit, "M99-6", designed by EDIBON, enables to carry out different practices related with motors and generators. The unit has different different types of motors: DC motor, AC motor and stepper motor.The...

Available

2.3.2.- ANALOG ELECTRONICS

M99

Analog Circuits Unit

The Analog Circuits Unit, "M99", designed by EDIBON, allows to do different practices related to basic electronics. The unit has different parts: analog multiplexer, analog multiplier, function generator, AM modulator and AM demodulator.The "M99"...

Available

2.3.5.- INSTRUMENTATION & CONTROL

M41

Resistance Transducers

This unit allows different practices related to resistance transducers to be carried out. The unit has five different types of transducers: PTC, NTC, LDR, strain gauge and RTD.The operation of thermistors is based on the principle that the...

Available

14.2.1.5.- INSTRUMENTATION AND CONTROL

M44

Applications of Light

This unit allows different practices related to the measurement of light intensity to be carried out. Photodiodes are semiconductor light sensors that generate a current or voltage when the P-N junction in the semiconductor is illuminated with...

Available

14.2.1.5.- INSTRUMENTATION AND CONTROL

M45

Linear Position and Force

Linear Variable Displacement Transducers (LVDT) provide a certain amount of voltage output relative to the parameters being measured, for example force, for signal conditioning.With Linear Position and Force Unit, "M45", designed by EDIBON, it is...

Available

14.2.1.5.- INSTRUMENTATION AND CONTROL

M46

Environmental Measurements

Environmental measurement is a data collection process. In other words, it is a continuous and systematic follow-up study of environmental variables (air quality and speed, humidity, pressure, etc.). The aim is to identify and evaluate...

FOR FURTHER INFORMATION, CONTACT US