4.4.- INSTALLATIONS AND MAINTENANCE

The needs of today's society are a challenge for any industry, since they have to be in continuous evolution and renewal to adapt to those needs.

View more

In recent years, as a result of the new industrial revolution or "Industry 4.0", the emergence of the "Industrial Internet of Things" ("IIoT") and the "Smart Factories", that adaptation is possible thanks to the application of the most sophisticated techniques in the design of new facilities or in the renovation of existing ones.

In spite of all these technological advances and the exhaustive controls carried out, it should not be forgotten that any element that take part in the productive process is going to be subjected to a mechanical and electrical wear (efforts, loads, etc.) and its useful life is limited. To avoid catastrophic failures, stoppages in production or any type of process that implies an increase of non-productive times and, therefore, an increase of costs, it is extremely important to carry out a good maintenance of machinery, electrical systems, etc.

Traditionally, only two types of maintenance were considered:

  • Corrective: the fault is solved once it has already occurred.
  • Preventive: periodic review of all those problematic elements and their replacement if required.

These types of maintenance involve very high and unnecessary costs in most cases. Nowadays, thanks to the available technology, it is possible to carry out predictive maintenance consisting of a comprehensive analysis of all those variables that take part in all the components of a system and be able to replace them at the right time.

But, if more control over the failures that can suffer all those mechanical components subject to wear is preferred, there is another type of maintenance, known as proactive maintenance. It goes one step further than the predictive maintenance, looking for the root of the problem.

View Products
INSTALLATIONS AND MAINTENANCE UNITS
Showing 1-36 of 43 item(s)
CUTAWAY UNIVERSAL MOTOR - EMT12-S
  • EMT12-S
Available
4.4.1.- CUTAWAY MODELS
EMT12-S
Cutaway Universal Motor
It includes a Cut away universal motor (EMT12-S) in order to study the different parts of this motor type.
CUTAWAY DC BRUSHLESS MOTOR - EMT18-S
  • EMT18-S
Available
4.4.1.- CUTAWAY MODELS
EMT18-S
Cutaway DC Brushless Motor
It includes a Cut away DC Brushless motor (EMT18-S) in order to study the different parts of this motor type.
CUTAWAY 3PH SQUIRREL-CAGE MOTOR - EMT7-S
  • EMT7-S
Available
4.4.1.- CUTAWAY MODELS
EMT7-S
Cutaway 3PH Squirrel-Cage Motor
It includes a Cut away asynchronous three-phase motor of squirrel cage (EMT7-S) in order to study the different parts of this motor type.
CUTAWAY 3PH WOUND MOTOR - EMT8-S
  • EMT8-S
Available
4.4.1.- CUTAWAY MODELS
EMT8-S
Cutaway 3PH Wound Motor
It includes a Cut away asynchronous three-phase motor with wound rotor (EMT8-S) in order to study the different parts of this motor type.
CUTAWAY STEPPER MOTOR - EMT19-S
  • EMT19-S
Available
4.4.1.- CUTAWAY MODELS
EMT19-S
Cutaway Stepper Motor
It includes a Cut away stepper motor (EMT19-S) in order to study the different parts of this motor type.
CUTAWAY 3PH RELUCTANCE MOTOR - EMT21-S
  • EMT21-S
Available
4.4.1.- CUTAWAY MODELS
EMT21-S
Cutaway 3PH Reluctance Motor
It includes a Cut away three-phase reluctance motor (EMT21-S) in order to study the different parts of this motor type.
CUTAWAY 1PH SHADED POLE MOTOR - EMT22-S
  • EMT22-S
Available
4.4.1.- CUTAWAY MODELS
EMT22-S
Cutaway 1PH shaded Pole Motor
It includes a Cut away single-phase shaded pole motor (EMT22-S) in order to study the different parts of this motor type.
MOTORS, GENERATORS AND TRANSFORMERS CONSTRUCTION APPLICATION - AEL-MGTC
  • AEL-MGTC
Available
4.4.2.- DETACHABLE MODELS
AEL-MGTC
Motors, Generators and Transformers Construction Application
The Motors, Generators and Transformers Construction Application, "AEL-MGTC" has been designed by EDIBON for theoretical and practical training in the field of electromechanical construction of electrical machines such as DC motors, AC motors,...
DISSECTIBLE MOTORS-GENERATORS APPLICATION - AEL-DMG-KIT
  • AEL-DMG-KIT
Available
4.4.2.- DETACHABLE MODELS
AEL-DMG-KIT
Dissectible Motors-Generators Application
The Dissectible Motors-Generators Application, "AEL-DMG-KIT", has been designed by EDIBON for the training at theoretical-practical level about the assembly of the following electric motors: DC Compound with Shunt-Series Motor-Generator,...
4 DISSECTIBLE INDUCTION MOTORS APPLICATION - AEL-DIM-KIT
  • AEL-DIM-KIT
Available
4.4.2.- DETACHABLE MODELS
AEL-DIM-KIT
4 Dissectible Induction Motors Application
The 4 Dissectible Induction Motors Application, "AEL-DIM-KIT", has been designed by EDIBON to demonstrate the students the assembly, dissectible and starting-up of several types of induction motors: the Three-Phase Induction Motor of Squirrel...
WIRING INSTALLATION TRAINING FOR AC AND DC MOTOR DRIVES - WIT-MDRV
  • WIT-MDRV
Available
4.4.3.- INSTALLATIONS AND MAINTENANCE TRAINING
WIT-MDRV
Wiring Installation Training for AC and DC Motor Drives
The Wiring Installation Training, AC and DC Motor Drivess application, "WIT-MDRV", has been designed by EDIBON for the formation at professional-practical level in the field of electrical motors controllers.This application will equip future...
WIRING INSTALLATION TRAINING FOR WIND POWER SYSTEMS - WIT-WPS
  • WIT-WPS
Available
4.4.3.- INSTALLATIONS AND MAINTENANCE TRAINING
WIT-WPS
Wiring Installation Training for Wind Power Systems
The Wiring Installation Training for Wind Power System application, "WIT-WPS", has been designed by EDIBON for the formation at professional-practical level in the field of the installations, wiring and commissioning of wind power energy...
WIRING INSTALLATION TRAINING FOR INDUSTRIAL LIGHTING INSTALLATIONS - WIT-ILI
  • WIT-ILI
Available
4.4.3.- INSTALLATIONS AND MAINTENANCE TRAINING
WIT-ILI
Wiring Installation Training for Industrial Lighting Installations
The Wiring Installation Training, Industrial Lighting Installations application, "WIT-ILI", has been designed by EDIBON for the formation at professional-practical level in the field of the installations, wiring and testing of the different...
WIRING INSTALLATION TRAINING FOR INDUSTRIAL SIGNALLING ELEMENTS - WIT-ISG
  • WIT-ISG
Available
4.4.3.- INSTALLATIONS AND MAINTENANCE TRAINING
WIT-ISG
Wiring Installation Training for Industrial Signalling Elements
The Wiring Installation Training, Industrial Signalling Elements application, "WIT-ISG", has been designed by Edibon for the formation at professional-practical level in the field of the installations, wiring and testing of the signaling...
WIRING INSTALLATION TRAINING FOR POWER FACTOR CORRECTION DEVICES - WIT-PFC
  • WIT-PFC
Available
4.4.3.- INSTALLATIONS AND MAINTENANCE TRAINING
WIT-PFC
Wiring Installation Training for Power Factor Correction Devices
The Wiring Installation Training, Power Factor Correction Devices application, "WIT-PFC", has been designed by Edibon for the formation at professional-practical level in the field of the installations, wiring and testing of existing power factor...
WIRING INSTALLATION TRAINING FOR INDUSTRIAL SWITCHING ELEMENTS - WIT-ISE
  • WIT-ISE
Available
4.4.3.- INSTALLATIONS AND MAINTENANCE TRAINING
WIT-ISE
Wiring Installation Training for Industrial Switching Elements
The Wiring Installation Training, Industrial Switching Elements application, "WIT-ISE", has been designed by Edibon for the students formation at a professional-practical level in the field of the installation, wiring and testing of industrial...
Ask for information