14.1.- BIOMECHANICS

Biomechanics studies the mechanics of movement of the living beings organism, among them the human body movement. This study ranges from the simplest movements of daily life, such as work or sports activity, to the movement of some internal organs, such as the heart. To study the human body kinetics, biomechanics applies the principles of mechanics and the knowledge of anatomy and physiology, allowing the design of new diagnostic and treatment instruments and the development of better implants and prostheses designs.

Nowadays, Biomechanics analyzes the movements of the combination of joints and muscles. These analyzes allow us to study the loads and efforts to which the human body is subjected. The knowledge of human kinetics makes possible the treatment of injuries and their subsequent rehabilitation, the design of prostheses that allow flexibility of movement, the search for new sports techniques to increase the performance of a physical activity or the prevention of the organism deterioration when doing activities at work and at home. This knowledge can be divided into several areas of Biomechanics: Medical Biomechanics, Sports Biomechanics and Occupational Biomechanics. Another application of Biomechanics is the design of robotic applications. The movements made by the robotic arms or the displacement capacity of some by means of an electro-mechanical locomotor system are based on the mechanics of living beings.

The continuous study of the mechanical behavior of organisms is leading the Biomechanics applications to develop bionic prostheses and artificial organisms that simulate the normal functioning of a real organism and can react to stimuli. In addition, the improvement of the exoskeletons technology will increase the mobility of people with reduced mobility and improve physical capacities when carrying out great strain activities.

View Products

BIOMECHANICS EQUIPMENT

Showing 49-72 of 111 item(s)

UNIT FOR STUDYING FREE VIBRATION OF A BAR - MEVLB

MEVLB

Available

7.1.4.- VIBRATIONS AND OSCILLATIONS

MEVLB

Unit for Studying Free Vibration of a Bar

The Unit for Studying Free Vibration of a Bar,"MEVLB", allows to study the features of the free vibrations of a bending bar.The natural frequency of the bending bar can be modified adding additional loads at the free end of a bar or varying the...

MSHU

Available

7.1.3.- STATICS AND DYNAMICS

MSHU

Simple Harmonic Motion Unit

This Simple Harmonic Motion Unit, "MSHU", designed by EDIBON, allows many experiments using several pendulums and devices, such as different types of pendulums (simple, bifilar, trifilar and Kater’s pendulum) and springs.Consists of a panel with a...

Available

7.1.3.- STATICS AND DYNAMICS

SRI

Unit to Study Rotational Inertia

The Unit to Study Rotational Inertia, "SRI", has been designed to carry out tests to analyze the moments of inertia of a solid and a hollow cylinder, both with same mass and diameter. The moment of inertia of another hollow cylinder with different...

Available

7.1.4.- VIBRATIONS AND OSCILLATIONS

MOT

Torsional Oscillations Unit

The Torsional Oscillations Unit, "MOT", is intended for easy experiments. It enables to illustrate and investigate the torsional oscillation in single rotor, multi-rotor and geared systems. The unit basically consists of a rigid frame that have...

COMPUTER CONTROLLED CRITICAL SPEED INVESTIGATION UNIT - MVCC

MVCC

Available

7.1.4.- VIBRATIONS AND OSCILLATIONS

MVCC

Computer Controlled Critical Speed Investigation Unit

Some phenomena that appear in mechanical systems, such as vibration, self-centering and resonance in rotary shafts, can be clearly demonstrated with the Computer Controlled Critical Speed Investigation Unit, "MVCC".The operation of the "MVCC" unit...

MEER

Available

7.1.4.- VIBRATIONS AND OSCILLATIONS

MEER

Whirling of Shafts Unit

The Whirling of Shafts Unit, "MEER", has been designed by EDIBON to demonstrate and determine different modes of oscillation and resonance of shafts with continuous distribution of mass under different conditions.The operation of the Whirling of...

Available

7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)

MCF

Belt Friction Unit

The Belt Friction Unit, "MCF", allows us to carry out studies and investigations to compare the driving torque for a given degree of overlap of a flat belt (leather or rope) and a V belt.With this unit the relationship between the tensions in the...

Available

7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)

MEF

Friction Study Unit

The Friction Study Unit, "MEF", allows the unit to illustrate the friction force by simple demonstrations.It is designed for the study of the relations between friction forces and normal forces, between hard or soft surfaces, between lubricated or...

MPCO

Available

7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)

MPCO

Journal Bearing Unit

The Journal Bearing Unit, "MPCO", designed by EDIBON, allows to study the pressure distribution in sliding bearings. It illustrates the principle of hydrodynamic lubrication.The unit is mounted on a metallic structure assembled on wheels for its...

MEMT

Available

7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)

MEMT

Tribology Modular Unit

The Tribology Modular Unit, "MEMT", designed by EDIBON, consists of a base unit with electronic console and a series of experimental units to investigate and visualize tribological phenomena.MEMT-UB. Drive Unit for Tribological Tests. This unit is...

DRIVE UNIT FOR TRIBOLOGICAL TESTS - MEMT-UB

Accessory of MEMT

Available

7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)

MEMT-UB

Drive Unit for Tribological Tests

Accessory of MEMT

This unit is common for the modules type "MEMT".It consists of a base unit and an electronic console:The Base Unit consists of a drive unit formed by a DC motor with a shaft. The motor is mounted in a reduction gear, obtaining enough torque in the...

RADIAL PRESSURE DISTRIBUTION IN A JOURNAL BEARING - MEMT-1

Accessory of MEMT

Available

7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)

MEMT-1

Radial Pressure Distribution in a Journal Bearing

Accessory of MEMT

This unit allows the visualization of the radial pressure distribution in a journal bearing with hydrodynamic lubrication.The "MEMT-1" unit consists of a journal bearing with hydrodynamic lubrication, a freely moving bearing housing with thirteen...

DYNAMIC FRICTION OF A CYLINDER ON A ROLLER - MEMT-2

Accessory of MEMT

Available

7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)

MEMT-2

Dynamic Friction of a Cylinder on a Roller

Accessory of MEMT

This unit allows to demonstrate the friction forces between several cylinders of different materials and a roller under different lubrication conditions.The "MEMT-2" unit consists of two levers that transmit a force applied by weights to a test...

DYNAMIC FRICTION OF A PIN ON A DISC - MEMT-3

Accessory of MEMT

Available

7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)

MEMT-3

Dynamic Friction of a Pin on a Disc

Accessory of MEMT

This unit allows to study the friction forces between several vertical friction pins of different materials and a rotating friction disc.The end of each vertical pin is made of a different material and rubs against the rotating steel disc. The...

Accessory of MEMT

Available

7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)

MEMT-4

Rolling Friction in Wheels

Accessory of MEMT

This module allows to determine the slip forces between two rotating friction discs in contact.The slip between the discs is maintained constant by a gearbox. The pressure can be adjusted with a lever and a set of weights. The unit includes a...

Accessory of MEMT

Available

7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)

MEMT-5

Elastohydrodynamic Lubrication

Accessory of MEMT

This unit allows to investigate the thickness and characteristics of a lubricant film on a rolling sphere.The unit consists in a steel sphere and a driven glass disc.The sphere is pressed against the underside of the glass disc. The light from a...

Accessory of MEMT

Available

7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)

MEMT-6

Friction Vibration

Accessory of MEMT

This module allows to demonstrate the static friction, the sliding friction, the related friction vibrations and the slip-stick effects.Several weights are placed on a horizontally rotating friction disc. It is prevented from turning by a cord....

Available

7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)

MCD

Thin Cylinder Unit

The Thin Cylinder Unit, "MCD", has been developed to enable the student to verify various analytical formulae with actual measured results. Strain gauges mounted in various positions and orientations on the cylinder provide an opportunity for...

UNIT FOR STUDYING BEARING FRICTION - MBF

Available

7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)

MBF

Unit for Studying Bearing Friction

The Unit for Studying Bearing Friction, "MBF", has been designed by EDIBON to study sliding friction in slide bearings and rolling bearings. Since rolling friction is very little, rotational dynamics basic tests can be performed with the inertia...

BELT FRICTION UNIT WITH DYNAMOMETERS - MCF/A

MCF/A

Available

7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)

MCF/A

Belt Friction Unit with Dynamometers

The Belt Friction Unit with Dynamometers, "MCF/A", designed by EDIBON, allows studies and investigations to compare the friction coefficient for a given contact angle of a flat belt and a V-belt.With this unit it is possible to observe the...

MCPG

Available

7.1.6.- STRUCTURAL MECHANICS

MCPG

Thick Walled Cylinder Unit

In the Thick-Walled Cylinder Unit, "MCPG", the stresses are determined through the measurement of the strains produced on the surface. These strains are measured by strain gauges.The thick-walled vessel consists of an aluminum cylinder of length...

UNIT FOR STUDYING FORCES IN A JIB CRANE - MFPG

MFPG

Available

7.1.6.- STRUCTURAL MECHANICS

MFPG

Unit for studying Forces in a Jib Crane

The Unit for studying Forces in a Jib Crane, "MFPG", is designed to study the tensile and compressive forces in a planar central force system based on the example of a crane jib.The unit represents a planar central force system in which multiple...

Available

7.1.6.- STRUCTURAL MECHANICS

MVS

Suspension Bridge Unit

The Suspension Bridge Unit, "MVS", has been meticulously designed by EDIBON to explore the dynamics of stresses in a suspension bridge system. This unit simulates a suspension bridge using a deck and two parallel main cables, allowing students to...

MARP

Available

7.1.6.- STRUCTURAL MECHANICS

MARP

Parabolic Arch Unit

The Parabolic Arch Unit "MARP" contains a pre-shaped articulated arch, which can be subjected to point or evenly distributed loads by means of seven uniformly distributed cables (cords) with hangers.One support of the arch is fixed whereas the...

FOR FURTHER INFORMATION, CONTACT US