AE-PLC-P Automatic Pressing Workstation

6.2.5.2.- PROCESSING WORKSTATIONS APPLICATIONS

INNOVATIVE SYSTEMS

The Automatic Pressing Workstation, "AE-PLC-P", has been designed by EDIBON to study the automatic pressing systems of the computer integrated manufacturing systems.

See general description

Catalog

Tender Specifications

Expansions

ICAI

Interactive Computer Aided Instruction Software

General Description

The Automatic Pressing Workstation, "AE-PLC-P", designed by EDIBON, is an workstation commanded by a PLC. The "AE-PLC-P" moves the pieces from the input zone to the pressing zone, once the piece is detected in the pressing zone, the "AE-PLC-P" emulates pressing the pieces with a hydraulic actuator.

The "AE-PLC-P" workstation is designed as a modular system to facilitate the understanding of the unit.

The main components are:

The PLC: is composed by the CPU PLC unit and all the extra modules needed to perform a correct working of the workstation.
The Control Panel: with start/stop button, emergency pushbutton, reset button, light indicators to show current state of the process, etc.
The Pneumatic Circuit: contains the required solenoid valves, the vacuum components, the filters and regulators to assure the appropriate working of the workstation.
The Workstation: is composed by real industrial vertical storage systems such as electric linear actuators, presence sensors, pneumatic gripper, etc.

The "AE-PLC-P" is an independent workstation that can work alone and/or in conjunction with other workstation to make up a complete Flexible Manufacturing System (*).

*The Flexible manufacturing systems product list is available at the "6.- MECHATRONICS and AUTOMATION" area.

Exercises and guided practices

GUIDED PRACTICAL EXERCISES INCLUDED IN THE MANUAL

Introduction to flexible manufacturing system (FMS).
Introduction to pneumatics and electro-pneumatics.
Introduction to hydraulics and electro-hydraulics.
Introduction to vacuum technology.
Study of the sensor detection.
Configuration of a pneumatic application.
Configuration of a hydraulic application.
Manual control of a Pressing system.
Automatic control of a Pressing system.
Change the parameters of the Pressing process.
Optimization of the process time.
Study and analysis of the faults inserted in the process with the fault generation module.

REQUIRED ELEMENTS

ADDITIONAL RECOMMENDED ELEMENTS

AE-AS

SIMILAR UNITS AVAILABLE

AE-PLC-FT

Available

6.2.5.2.- PROCESSING WORKSTATIONS APPLICATIONS

AE-PLC-FT

Filtering Workstation

The Filtering Workstation, "AE-PLC-FT", designed by EDIBON, is a filtration system commanded by a PLC. The "AE-PLC-FT" is composed of two tanks with a filter between them. The liquids are pumped from the first tank into the second tank through the...

AE-PLC-MS

Available

6.2.5.2.- PROCESSING WORKSTATIONS APPLICATIONS

AE-PLC-MS

Mixing Workstation

The Mixing Workstation, "AE-PLC-MS", designed by EDIBON, is a workstation commanded by a PLC. The "AE-PLC-MS" is composed of three tanks with different liquids. These liquids are pumped and mixed in a reactor vessel using a pump and different...

AE-PLC-PHD

Available

6.2.5.2.- PROCESSING WORKSTATIONS APPLICATIONS

AE-PLC-PHD

Punching Workstation

The Punching Workstation, "AE-PLC-PHD", designed by EDIBON, is a workstation commanded by a PLC. This workstation takes a piece and introduces it inside the punching zone that is protected with a polycarbonate screen. Once the piece is inside the...

AE-PLC-FS

Available

6.2.5.2.- PROCESSING WORKSTATIONS APPLICATIONS

AE-PLC-FS

Filling Workstation

The "AE-PLC-FS" is a filling system commanded by a PLC. The workstation detects the bottles that arrive on a conveyor belt to the filling position and pumps liquids from a reservoir tank into the bottles using a pump and different types of valves....

AE-PLC-CRS

Available

6.2.5.2.- PROCESSING WORKSTATIONS APPLICATIONS

AE-PLC-CRS

Corking Workstation

The "AE-PLC-CRS" is a corking system commanded by a PLC. The workstation detects the bottles that arrives on a conveyor belt to the corking position and closes them with a cap using a pressing cylinder. The "AE-PLC-CRS" also includes different...

AE-PLC-APB

Available

6.2.5.2.- PROCESSING WORKSTATIONS APPLICATIONS

AE-PLC-APB

Bottle Opening Workstation

The "AE-PLC-APB" is a bottles opening system commanded by a PLC. The unit is equipped with different containers and a retention system based on a cylinder, in order to allow the Robotic Arm Workstation "AE-BR" or the SCARA Arm Workstation "AE-SCA"...

AE-PLC-M

Available

6.2.5.2.- PROCESSING WORKSTATIONS APPLICATIONS

AE-PLC-M

Mounting Workstation

The Mounting Workstation, "AE-PLC-M", designed by EDIBON, is a workstation commanded by a PLC that provides pieces to the system and mount them inside of the base pieces.The "AE-PLC-M" keeps the pieces in a vertical storage. The workstation take...

AUTOMATIC SCREWDRIVING WORKSTATION - AE-PLC-AT

AE-PLC-AT

Available

6.2.5.2.- PROCESSING WORKSTATIONS APPLICATIONS

AE-PLC-AT

Automatic Screwdriving Workstation

The Automatic Screwdriving Workstation, "AE-PLC-AT", designed by EDIBON, is an automatic screw workstation commanded by a PLC that supply and mount four screws in a piece.The "AE-PLC-AT" keeps the screws in a vertical storage. The workstation take...

AE-PLC-MEMB

Available

6.2.5.2.- PROCESSING WORKSTATIONS APPLICATIONS

AE-PLC-MEMB

Bottling Workstation

The Bottling Workstation, "AE-PLC-MEMB", designed by EDIBON, is an automatic rotary table with a vessel feeding system, a controlled water filling system, a cap feeder, a vessel closing system, and finally, an extraction system to a complete...

AE-PLC-MET

Available

6.2.5.2.- PROCESSING WORKSTATIONS APPLICATIONS

AE-PLC-MET

Labelling Workstation

The The Labelling Process Workstation, "AE-PLC-MET", designed by EDIBON, is an workstation commanded by a PLC. The "AE-PLC-MET" also include a transporting system that carries the incoming bottles to the labelling zone, supplying the bottles one...

AE-PLC-ST

Available

6.2.5.2.- PROCESSING WORKSTATIONS APPLICATIONS

AE-PLC-ST

Drilling Workstation

The Drilling Workstation, "AE-PLC-ST", designed by EDIBON, is an automatic drilling workstation commanded by a PLC. The "AE-PLC-ST" also include a conveyor system to transport the incoming pieces to the drilling zone where the drilling machine...

AE-PLC-SMOLD

Available

6.2.5.2.- PROCESSING WORKSTATIONS APPLICATIONS

AE-PLC-SMOLD

Molding Workstation

The Molding Workstation, "AE-PLC-SMOLD", designed by EDIBON, is an automatic molding workstation commanded by a PLC. The "AE-PLC-SMOLD" also include a conveyor system to transport the incoming pieces to the molding zone where the unit simulate a...

AE-PLC-SCOR

Available

6.2.5.2.- PROCESSING WORKSTATIONS APPLICATIONS

AE-PLC-SCOR

Cutting Workstation

The Cutting Workstation "AE-PLC-SCOR", designed by EDIBON, is an automatic cutting workstation commanded by a PLC. The "AE-PLC-SCOR" also includes a conveyor system to transport the incoming pieces to the cutting zone where the cutting machine...

AE-PLC-CP

Available

6.2.5.2.- PROCESSING WORKSTATIONS APPLICATIONS

AE-PLC-CP

Process Control Workstation

The Process Control Workstation, "AE-PLC-CP", designed by EDIBON, is a process control workstation commanded by a PLC that coordinates.The "AE-PLC-CP" workstation is designed as a modular system to facilitate the understanding of the unit.The main...