- ホーム
- 製品
- 1.- 物理学
- アカデミックプログラム
- より高い技術教育
- 食品エンジニアリング
- 地形工学
- 地質学
- 森林エンジニアリング
- 環境工学
- エコロジーエンジニアリング
- テキスタイルエンジニアリング
- 農業産業のためのエンジニアリング
- 機械工学
- 化学
- ケミカルエンジニアリング
- プロセスエンジニアリング
- 地質学、鉱業および石油工学
- 石油トレーニングセンター
- NAVAL ENGINEERING
- 農業エンジニアリング
- 電子工学
- 建築
- コンピュータサイエンスとエンジニアリング
- 自動エンジニアリング
- エネルギー工学
- エネルギー研修センター
- 電気工学
- システムエンジニアリング
- 航空工学
- 海洋工学と海洋科学
- 物理学
- インダストリアル・エンジニアリング
- 技術研修、開発および研究のための国際センター
- 材料エンジニアリング
- 冶金エンジニアリング
- 土木工学
- 電気通信エンジニアリング
- 技術と職業訓練
- より高い技術教育
- 2.- 電子工学
- 3.- 通信工学
- 4.- 電気工学
- 5.- エネルギー
- 6.- メカトロニクス
- 7.- 機械
- 8.- 流体力学
- 9.- 熱力学&熱工学
- 10.- プロセス制御
- 11.- 化学工学
- 12.- 食品&水処理技術
- 13.- 環境
- 14.- 生物医学工学
- 実験室付属品
- カスタマイズされたパイロットプラント
- モジュール
- 擴展
- 実験室
- パイロットプラント
- 事業内容
- 技術
- ダウンロード
- 私たちに関しては
- ニュース
- お問い合わせ
Setting up at Centre de Formation des Metiers de l´Industrie (CFMI) in Togo
We have returned to the Centre de Formation des Metiers de l´Industrie (CFMI) in Togo to install some of our equipment, among them:
- Computer Controlled Water Treatment (PPTAC/1)
- Computer Controlled Deep Bed Filter Unit (EFLPC)
- Sewerage Unit (TSID)
- Computer Controlled Drainage and Seepage Tank (PDFDC)
- Computer Controlled Continuous and Batch Filtration Unit (TFUC)
- Photovoltaic Power Plants Application, with SCADA (AEL-PHVGC)
- Computer Controlled Automobile Air Conditioning Trainer (TAAUC)
- Computer Controlled Refrigeration Unit with Open Compressor (TRCC)
- Computer Controlled Test Bench for Single-Cylinder Engines, 7.5 kW (TBMC8)
- Computer Controlled Balance of Reciprocating Masses Unit (MBMRC)
These units belong mainly to the areas of Environment, Chemical Engineering, Thermodynamics & Thermotechnics, Energy and Mechanics.
It is a great pleasure for us to see centres like this one full of our units, thank you for trusting us once again!
関連製品
13.3.- 廃水処理
PPTAC/1
The Computer Controlled Water Treatment Plant 1, "PPTAC/1", designed by EDIBON, allows to study the main principle of the critical operations in the water treatment.These operations are: depth filtration, adsorption and ion exchange.The general...
11.1.11.- ろ過、 沈降および混合
EFLPC
コンピューター制御深層ろ過実験装置
The Computer Controlled Deep Bed Filter Unit, "EFLPC", allows us to filter a fluid in order to eliminate particles in suspension, to have it in more adequate conditions for its subsequent use or consumption.The pump takes raw water from one of the...
9.10.3.- 設置および保守の慣行
TSID
下水処理システム実験装置
With the Sewerage Unit, "TSID", tests about a wastewater sanitation system can be made and the flow in a sewage system can be observed.A complete sewage system can be observed with the "TSID" unit. The collection of wastewater from a series of...
11.1.11.- ろ過、 沈降および混合
PDFDC
コンピューター制御排水・漏水タンク
This unit has been designed for the practical demonstration, visualization and experimental study of the flow through permeable media and flows in subsoil.The unit basically consist of a tank (soils container) to contain the sand, lower water...
11.1.11.- ろ過、 沈降および混合
TFUC
コンピューター制御連続バッチ式フィルター実験装置
This filtration unit has been designed to study the filtration process with two different types of filters. On one hand, there is a vertical plate filter consisting of nylon plates with a diameter of 5 microns, used to filter a known concentration...
5.3.1.- 光起電力太陽エネルギー
AEL-PHVGC
SCADA搭載の太陽光発電プラントのアプリケーション
The Photovoltaic Power Plants Application, with SCADA, ''AEL-PHVGC'', has been designed to study the operations carried out in photovoltaic power systems connected to the energy national grid. This application allows to study the procedure of...
9.2.- 暖房、 換気、 空調、 温水
TAAUC
コンピューター制御自動車空調演習装置
The Computer Controlled Automobile Air Conditioning Trainer, "TAAUC", consists, basically, of a compressor driven through a belt by a motor that simulates the engine of a car.The number of revolutions of the engine and, therefore, the compressor,...
9.4.- 冷凍
TRCC
オープン圧縮機付コンピューター制御冷却実験装置
The Computer Controlled Refrigeration Unit with Open Compressor is arranged in a clear way and represents a typical compression refrigeration system with open compressor:The main elements of the unit are:Open compressor activated by an electric...
7.2.3.- エンジン
TBMC8
7.5 kW用コンピュータ制御テストベンチ
The Computer Controlled Test Bench for Single-Cylinder Engines, 7.5 kW, "TBMC8", designed by EDIBON, is a teaching unit to test internal combustion engines of up to 7.5 kW.The element of the unit that offers load torque is an eddy current...
7.1.3.- 静的および動的
MBMRC
コンピューター制御レシプロマスバランス実験装置
The Computer Controlled Balance of Reciprocating Masses Unit, "MBMRC", is a bench-mounting unit that allows to investigate and examine the free masses and moments of a reciprocating engine with a single cylinder, with two cylinders or with four...