FME10 Dead Weight Calibrator

INNOVATIVE SYSTEMS

The Pressure Gauge Calibrator, "FME10", designed by EDIBON, allows the study of the operation of a Bourdon type pressure gauge using a standard set of calibrated weights and the determination and the study of the pressure gauge hysteresis curve.

See general description

Catalog

Tender Specifications

Expansions

ICAI

Interactive Computer Aided Instruction Software

MSAC

Modular System for Acquisition and Control

Laboratories

8TV

Technical and Vocational Education Fluid Mechanics Laboratory

8HE

Higher Education Fluid Mechanics Laboratory

General Description

The unit consists of a hollow cylinder in whose interior a precision piston moves. Using a system of calibrated weights, we produce predetermined pressures inside the cylinder.

The Bourdon manometer that must be contrasted is connected to the cylinder by means of a flexible pipe.

Unit levelling through adjustable feet.

Exercises and guided practices

GUIDED PRACTICAL EXERCISES INCLUDED IN THE MANUAL

Bourdon type manometer calibration.
Hysteresis curve determination.

SIMILAR UNITS AVAILABLE

PRECISION PRESSURE GAUGE CALIBRATOR - HCMP

HCMP

Available

8.2.- MEASUREMENT

HCMP

Precision Pressure Gauge Calibrator

The Precision Pressure Gauge Calibrator, "HCMP", is a self-contained and portable dead weight precision pressure gauge calibrator.The unit allows the calibration of pressure gauges up to 300 bar. Calibration is accurate within ± 0.015 % of...

PRESSURE MEASUREMENT AND CALIBRATION UNIT - TMCP

TMCP

Available

8.2.- MEASUREMENT

TMCP

Pressure Measurement and Calibration Unit

The Pressure Measurement and Calibration Unit, "TMCP", has been designed to study the concept of pressure and the different methods and techniques used to measure this variable.The dead-weight calibrator consists of a cylinder in which interior a...

SUPPLEMENTARY EQUIPMENT

BASIC FLUIDS MECHANICS INTEGRATED LABORATORY - LIFLUBA

LIFLUBA

Available

8.1.7.- HYDRAULIC MACHINES: TURBINES

LIFLUBA

Basic Fluids Mechanics Integrated Laboratory

Hydraulics is the branch of science that deals with the mechanical properties of fluids, and Fluid Mechanics provides the foundation for hydraulics.With LIFLUBA (Basic Fluids Mechanics Integrated Laboratory), EDIBON tries to give answer to the...

FME02

Available

8.1.2.- MEASUREMENT

FME02

Flow over Weirs

The Flow over Weirs, "FME02", designed by EDIBON, has many elements that are used in combination with the Hydraulics Bench (FME00): A special mouthpiece is coupled to the outlet mouthpiece for water in the Hydraulics Bench (FME00).Two soothing...

FME37

Available

8.1.2.- MEASUREMENT

FME37

Flowmeter Calibrator

The Flowmeter Calibrator, "FME37", designed by EDIBON, allows for the assessment of the accuracy and performance of the most commonly used flow meters. It features a panel of four-tube pressure gauges displaying pressure differences at various...

FME18

Available

8.1.2.- MEASUREMENT

FME18

Flow Meter Demonstration

The Flow Meter Demonstration, "FME18", designed by EDIBON, allows through 3 different flow measurement accessories: Venturi tube, orifice plate and a variable area meter installed in series in the unit, the study to find the flow rate of the fluid...

DEPRESSION MEASUREMENT SYSTEM (VACUUM GAUGE) - FME26

FME26

Available

8.1.2.- MEASUREMENT

FME26

Depression Measurement System (vacuum gauge)

The Depression Measurement System (vacuum gauge), "FME 26", is designed to be connected to the inlet of some flow aspiration system, in a way that we could measure the depression made by the so-called aspiration system. Such system will be...

FME30

Available

8.1.2.- MEASUREMENT

FME30

Transparent Vortex Flow Meter

The Transparent Vortex Flow Meter, "FME30", designed by EDIBON allows to perform studies and experiments of different volumetric and mass flow measurement methods, as well as the comparison of continuous and discontinuous methods.This unit...

FME30/I

Available

8.1.2.- MEASUREMENT

FME30/I

Vortex Flow Meter

The Vortex Flowmeter, "FME30/I", designed by EDIBON, allows to perform different studies and experiments of various volumetric and mass flow measurement methods, as well as the comparison of continuous and discontinuous methods.This unit includes...

FME32

Available

8.1.2.- MEASUREMENT

FME32

Static Pitot Tube

The Static Pitot Tube, "FME32", designed by EDIBON, the change in flow speed within a tube can be determined.The Pitot static tube can be moved across the whole cross-section of the tube, and thus to measure the pressure profile.This tube is...

FME34

Available

8.1.2.- MEASUREMENT

FME34

Fluid Statics and Manometry

The Fluid Statics and Manometry, "FME34", designed by EDIBON, allows the study of static fluids and manometry providing the user with an introduction in the behavior of liquids under hydrostatic conditions (fluids at standstill) and the...

FME36

Available

8.1.2.- MEASUREMENT

FME36

Rotameter

The Rotameter, "FME36", designed by EDIBON, is a variable area flowmeter with floater. This type of flowmeter can be used for flow measurements in almost any environment.The operation mode of this type of flowmeter is based on the fact that if a...

DATA ACQUISITION SYSTEM AND SENSORS - BDAS

BDAS

Available

8.1.7.- HYDRAULIC MACHINES: TURBINES

BDAS

Data Acquisition System and Sensors

BDAS is designed to monitor the measurements of each unit type "FME" from a computer (PC).This system can monitor any unit, checking the revolutions given by the water pump or the torque, differential pressures for Bernoulli theorems, pressure...

Quality

AFTER-SALES SERVICE

FOR FURTHER INFORMATION, CONTACT US

FME10 Dead Weight Calibrator

INNOVATIVE SYSTEMS

Expansions

Laboratories

RELATED NEWS

General Description

Exercises and guided practices

GUIDED PRACTICAL EXERCISES INCLUDED IN THE MANUAL

SIMILAR UNITS AVAILABLE

SUPPLEMENTARY EQUIPMENT

Quality

AFTER-SALES SERVICE