WHERE ARE WE ALREADY WORKING?

EUROPE

More than 45 countries in Europe use EDIBON technology.

Some references in Europe

Customer:
UNIVERSITY OF TIRANA, UNITIR

Department:
FACULTY OF NATURAL SCIENCES

Description:
We have moved to the first University in Albania, Universiteti i Tiranes. Here, we have installed and made the training to the teachers for some of our equipment, including: The Computer Controlled Solid-Liquid Extraction Unit,"UESLC", Isothermal Reactor with Stirrer, the Computer Controlled Pyrolysis Unit, "EPIRC", the Applications for Process Control and the Computer Controlled, "APC-FLPTIC" among others

Customer:
INSTITUT COMMUNAL TECHNIQUE FRANS FISCHER

Description:
We are happy to announce that the University of Belgium can now enjoy learning proccess with new equipment. The installed equipment has been the EBGC, Computer Controlled Biogas Process Unit, with which they can continue investigating about the different processes that occur during the production of biogas.

PDF

Customer:
INSTITUT TECHNIQUE FRANZ FISCHER, BRUSSELS

Description:
Installation and Training of units belonging to the Energy area.

Customer:
UNIPETROL - LITVÍNOV

Description:
Installation and Training of Temperature, Pressure, Level and Flow Regulation Application, with Industrial Controller belonging to the Process Control Area.

Customer:
DENMARKS TEKNISKE UNIVERSITET, DTU

Departament:
DEPARTAMENT OF CHEMICAL AND BIOCHEMICAL ENGINEERING

Description:
We have made a new installation for research, our Computer Controlled and Touch Screen Solid-Liquid Extraction Pilot Plant, "SLE00". With this unit, the researchers can now carry out several different solid-liquid extraction experiments working at high pressure and temperature conditions [up to 80ºC] and also they can work with different disolvents (base, acid, organic)

Customer:
NOVIA UNIVERSITY OF APPLIED SCIENCES

Department:
Mechanical Engineering

Description:
We are very happy to have completed another installation. This time we have moved up to Yrkeshögskolan Novia - Novia UAS Dept. of Mechanical Engineering to install the Computer Controlled Organic Rankine Cycle Unit, which allows the student to study the complete process and the components of an organic Rankine Cycle.

Customer:
IUT OF METZ, LORRAINE UNIVERSITY

Description:
This time, we have traveled to Lorraine (France). Here we have installed our Computer Controlled PEM Fuel Cell Unit “EC5C” and our Computer Controlled Biomass Process Unit “EBMC”

Customer:
ECOLE NATIONALE SUPERIEURE EN GENIE DES TECHNOLOGIES INDUSTRIELLES, ENSGTI

Departament:
Higher National School in Engineering of Industrial Technologies

Description:
Université de Pau et des Pays de l’Adour entrusts EDIBON with the setting-up of the Wind Energy Unit “EEE”. It's always a pleasure to contribute to the development of practical education in Renewable Energy

Customer:
ECOLE NATIONALE SUPERIEURE EN GENIE DES TECHNOLOGIES INDUSTRIELLES, ENSGTI

Description:
We are happy to announce a new installation of our Computer Controlled Flow of Compressible Fluids Unit, “HFCC”, in the Ecole Nationale Superieure En Genie Des Technologies Industrielles, Ensgti . Students will be able to study the variation of pressure and density and the thermodynamics and fluid dynamics characteristics that the fluid has among many other applications.

PDF

Customer:
UNIVERSITÉ DE PAU ET DES PAYS DE L'ADOUR, PAU

Departament:
Higher National School in Engineering of Industrial Technologies

Description:
Université de Pau et des Pays de l’Adour entrusts EDIBON with the setting-up of the EEE wind energy unit. It's always a pleasure to contribute to the development of practical education

PDF

Customer:
BADEN-WÜRTTENBERG COOPERATIVE STATE UNIVERSITY, MANNHEIM

Departament:
Department of Mechanical Engineering

Description:
Installation and Training of units belonging to the area of Fluid Mechanics

PDF

Customer:
AGRICULTURAL UNIVERSITY OF ATHENS, ATHENS

Departament:
Department of Natural Resources, Management and Agricultural Engineering

Description:
Installation and Training of units belonging to the areas of Thermodynamics and Chemical Engineering

PDF

Customer:
INTERNATIONAL HELLENIC UNIVERSITY, THERMI

Departament:
Renewable Energy Laboratories

Descripction:
Installation and Training of units belonging to the area of Energy

Customer:
AGRICULTURE AND FOOD DEVELOPMENT AUTHORITY, TEAGASC

Description:
For them, we have custom designed and manufactured this Pilot Plant for Cereal Malting (CE00/MA) for research. This unit includes everything that is needed to understand the proper functioning of a cereal malting plant. It includes a steeping tank, a germinator, a dryer-roaster and a decuimer. In addition, it incorporates the auxiliary equipment necessary to carry out the operation in a comfortable and safe way. It’s entirely made with food grade materials.

PDF

Customer:
DUNDALK INSTITUTE OF TECHNOLOGY (DIT), DUNDALK

Departament:
Department of Electrical Engineering

Description:
It was a pleasure to spend time in Ireland at the Dundalk Institute of Technology, Institute of Technology Carlow, Waterford Institute of Technology, Limerick Institute of Technology and Galway-Mayo Institute of Technology installing our equipment for Practices in Installations and Wiring of Hybrid Energy System “AEL-WCHS” for electricity students

Customer:
LICEO STATALE GALILEO GALILEI; ISTITUTO DI ISTRUZIONE SUPERIORE; ISTITUTO DI ISTRUZIONE SUPERIORE “F. BALSANO”; ISTITUTO DI ISTRUZIONE SUPERIORE "S. LOPIANO", COSENZA

Description:
There we have installed our Computer Controlled PEM Fuel Cell Unit, “EC5C”, and our Computer Controlled Thermal Solar Energy Unit, “EESTC”

Customer:
UNIVERSITÁ DI NAPOLI FEDERICO II

Description:
We would like to thank everyone at the Università degli Studi di Napoli Federico II (Italy) Unina News for their hospitality, where we carried out the installation of the Computer Controlled Flow Channels, with SCADA CFGC for the Civil Construction and Environmental Engineering department. This unit will allow students to experiment and perform multiple tests related to hydrodynamics

PDF

Customer:
UNIVERSITÀ DEGLI STUDI DI GENOVA, GENOVA

Departament:
Department of Civil, Chemical and Environmental Engineering

Description:
Students from the Department of Civil, Chemical and Environmental Engineering at the Università degli Studi di Genova, Italy can now enjoy and continue their training with the Computer Controlled Continuous Distillation Unit, with SCADA and PID Control. The student can investigate the principles that rule the mass and energy transference, as well as determine optima operation point to carry out a big quantity of separations. Proud of the setup.

Customer:
PROFESSIONAL EDUCATION COMPETENCE CENTER "RIGA TECHNICAL COLLEGE", RTK

Description:
The entire Edibon team is grateful after having supplied and trained the teachers from the Vocational Education Competence Center Riga Technical College RTK. Some of the equipment installed are our Application of AC Three-Phase Induction Motor of Squirrel Cage "AEL-ACINA", the Application of AC Three-Phase Induction Motor of Wound Rotor "AEL-ACWRA", Lighting Application with Timer Switch "AEL-AD5", among others and all of them controlled from our PLC

Customer:
UNIVERSITY OF MALTA

Department:
Department of Environomental Design

Description:
With the Computer Controlled Recirculating Air Conditioning Unit “TARC”, students will be able to introduce into the complex world of air conditioning systems, as well as studying and determining the optimal parameters for the operation of the unit in function of the environmental requirements (humidity, heat, temperature and cooling, etc.)

Customer:
INSTITUTO SUPERIOR DE EDUCAÇÃO E CIÊNCIAS, ISEC

Department:
Engineering and Aeronautics Department

Description:
Our team has installed and trained teachers on several of our units: the Computer Controlled Two -Shaft Gas Turbine “TGDEC”, the Computer Controlled Axial Fan Teaching Unit, ”HVAC” and the Hydrostatics and Fluid Properties Bench among others

Customer:
UNIVERSIDAD DE VIGO

Description:
We carried out our last installation at UNIVERSIDAD DE VIGO. It was a pleasure to share time with the electronic engineering department, who will now be able to enjoy the benefits of studying and researching with the new equipment installed. Units: the Computer Controlled Biomedical Circulatory System Teaching Unit (BICSC), the Computer Controlled Biomedical Human Biosignals and Parameters Teaching Unit (BIHBPC) and the Computer Controlled Biomedical Spirometry and Breath Teaching Unit (BISBC). Hope see you all again!

Customer:
INSTITUTO DE LA GRASA

Description:
We are very pleased to announce our recent collaboration with Instituto de la Grasa, dependent on The Spanish National Research Council, CSIC, with the installation of the Advanced Computer Controlled Deodorizing Unit. The AEDC/A allows the study of the deodorization process, stripping undesirable compounds from edible oils. We are condident it will offer a very enriching teaching experience. Thank you for your trust!

Customer:
UNIVERSIDAD DE HUELVA

Description:
Our engineers has moved to the @unihuelva to carry out the installation of several equipments for students and researchers of the agroforestry science department, including: AFTC, QRCC, TCPGB, CF 80/5, PBSPC, HEMP, EMLS, TFRC, MCEN, TCEB, AFT, MINI-EESTC. We are proud to make an installation like this in a great university to contribute in the formation of their students.

Customer:
UNIVERSITAT POLITÈCNICA DE CATALUNYA

Description:
We are pleased to say that the Universitat Politècnica de Catalunya - UPC will be able to count on the Steam Generator, TGV-6KW and Computer Controlled Steam Turbine, TTVC, equipment for the study of a steam power plant.

Customer:
CENTRO INTEGRADO DE FORMACIÓN PROFESIONAL TECNOLÓGICO INDUSTRIAL DE LEÓN

Department:
Department of Energy and Water

Description:
We are very proud that EDIBON units are now part of the technical equipment at the CIFP Tecnológico Industrial in Leon (Spain), after the installation of the AMCP and TFRC units that will help the students of the energy and water department to understand their operational functioning.

Customer:
UNIVERSIDAD DEL PAÍS VASCO

Description:
The EDIBON team has carried out a installation, this time in our country, at the International UPV/EHU. Now, students and professors of the university have the possibility to continue their studies with the Computer Controlled Continuous Distillation, UDCC, the Computer Controlled Test Bench for Four-Cylinders Engines, 75 kW, TBMC75 and the Two Doors Domestic Refrigeration System Trainer, TRD2PC. Hope you enjoy it!

Customer:
UNIVERSIDAD REY JUAN CARLOS

Department:
LABORATORIO POLIVALENTE III. ETSI DE TELECOMUNICACIÓN. CAMPUS DE FUENLABRADA

Description:
Installation and training of units belonging to the Fluid Mechanic & Aerodynamics.

Customer:
UNIVERSIDAD DE VIGO

Description:
Installation and Training of units belonging to the Thermodynamic area.

PDF

Customer:
UNIVERSIDAD AUTÓNOMA DE MADRID

Department:
CHEMICAL ENGINEERING

Description:
Installation and Training of units belonging to the Chemical Engineering. Pilot Plant of Chemical Engineering & Food Technology.

PDF

Customer:
UNIVERSIDAD DE CÁDIZ (UCA), CÁDIZ

Department:
Department of Systems and Automatic Engineering, Electronic and Electronic Technology

Description:
Installation and Training of units belonging to the area of Electronics

Customer:
INSTITUTO QUÍMICO DE SARRIÁ

Department:
Department of Chemical Engineering

Description:
At EDIBON we have teaching equipment from all branches of engineering to train all future engineers in a practical way. We have carried out the installation of the Computer Controlled Crystallization Unit, QUCC, at IQS (Spain) chemistry's department. Looking forward to hearing from you!

PDF

Customer:
UNIVERSIDAD CEU SAN PABLO (USPCEU), MADRID

Department:
Department of Architecture and Design

Description:
Installation and Training of units belonging to the area of Fluid Mechanics

PDF

Customer:
UNIVERSIDAD DE CÁDIZ (UCA), CÁDIZ

Department:
Department of Systems and Automatic Engineering, Electronic and Electronic Technology

Description:
It is a pleasure to contribute to the training of the students of Universidad de Cádiz (UCA) in SystemsEngineering and Automation, Electronic Technology and Electronics Department. We hope you enjoy your new equipment installed.

PDF

Customer:
UNIVERSIDAD DE CANTABRIA (UC), TORRELAVEGA

Department:
Department of Mining Engineering

Description:
Installation and Training of units belonging to the area of Fluid Mechanics

Customer:
UNIVERSIDAD REY JUAN CARLOS

Description:
Installation and Training of units belonging to the Materials and Mechanics area.

PDF

Customer:
UNIVERSIDAD DE GRANADA (UGR), GRANADA

Department:
Department of Structural Mechanics & Hydraulic Engineering

Description:
Installation and Training of units belonging to the area of Fluid Mechanics

PDF

Customer:
UNIVERSIDAD POLITÉCNICA DE VALENCIA (UPV), VALENCIA

Department:
Department of Applied Thermodynamics

Description:
Installation and Training of units belonging to the area of Thermodynamics

PDF

Customer:
UNIVERSIDAD REY JUAN CARLOS (URJC), MADRID

Department:
Department of Chemical & Environmental Technology

Description:
Installation and Training of units belonging to the area of Thermodynamics

PDF

Customer:
CIFP TECNOLÓGICO INDUSTRIAL DE LÉON, LEÓN

Department:
Department of Energy and Water

Description:
Installation and Training of units belonging to the area of Energy

PDF

Customer:
CENTRO INTEGRADO PÚBLICO DE FORMACIÓN PROFESIONAL DE CATARROJA, CATARROJA

Department:
Department of Energy & Water

Description:
Installation and Training of units belonging to the area of Energy

PDF

Customer:
IES SIERRA DE CARRASCOY, MURCIA

Department:
Department of Renewable Energies

Description:
Installation and Training of units belonging to the area of Energy

Customer:
UNIVERSIDAD DE LEÓN

Department:
Department of Food Hygiene and Technology

Description:
Installation and training of units belonging to the Food and Water Technologies area.

Customer:
UNIVERSIDAD DE CÁDIZ

Department:
Escuela Superior de Ingeniería

Description:
Installation and training of units belonging to the Fluid Mechanics area.

PDF

Customer:
ÉCOLE POLYTECHNIQUE FÉDÉRALE DE LAUSANNE, LAUSANNE

Departament:
Laboratory of Chemical Engineering

Description:
Installation and Training of units belonging to the area of Energy, Fluid Mechanics, Process Control and Chemical Engineering

PDF

Customer:
UNIVERSITY OF DERBY

Department:
College of Engineering and Technology

Description:
Installation and Training of units.

PDF

Customer:
UNIVERSITY OF CHESTER, CHESTER

Departament:
Department of Mechanical Engineering

Description:
Installation and Training of units belonging to the area of Mechanics

Ask for information