销售冠军
Showing 829-864 of 927 item(s)
12 24 36
COMPUTER CONTROLLED FLOCCULATION TEST UNIT - PEFC
  • PEFC
Available
13.3.- 废水处理
PEFC
计算机控制的絮凝试验装置
The Computer Controlled Flocculation Test Unit, "PEFC", shows the removal of dissolved substances by coagulation and flocculation.It has six beakers where water to be tested is poured. Each one has one adjustable speed paddle stirrer.The unit is...
查看单位
COMPUTER CONTROLLED STEAM MOTOR AND ENERGY CONVERSION UNIT - TSMEC
  • TSMEC
Available
9.8.- 热机
TSMEC
计算机控制的蒸汽机与能量转换设备
The process starts when water is impelled by a computer controlled pump from a storage tank to a computer controlled water boiler, where it is transformed into steam. The boiler is made up of heating elements, whose power is measured and...
查看单位
COMPUTER CONTROLLED ADVANCED CRYSTALLIZATION UNIT - QUCC/A
  • QUCC/A
Available
11.1.10.- 结晶和热解
QUCC/A
计算机控制的高级结晶设备
The Advanced Computer Controlled Crystallization Unit, "QUCC/A", designed by EDIBON, is a crystallization unit that by means of the cooling method allows the visualization and study of the industrial operation of mass transfer in which the...
查看单位
COMPUTER CONTROLLED UNIT FOR TRANSIENT DRAINAGE PROCESSES IN STORAGE RESERVOIRS - PDDRC
  • PDDRC
Available
8.9.3.- 安装和维护惯例
PDDRC
计算机控制直联排水系统
The Computer Controlled Unit for Transient Drainage Processes in Storage Reservoirs, "PDDRC", allows to investigate transient drainage processes in storage reservoirs, to simulate a rainwater retention basin and to study the operation of a surge...
查看单位
COMPUTER CONTROLLED PEM FUEL CELL UNIT - EC5C
  • EC5C
Available
5.3.9.- 氢燃料电池
EC5C
计算机控制质子交换膜燃料电池组
The Computer Controlled PEM Fuel Cell Unit, "EC5C", has been designed by EDIBON to allow the students to understand the fuel cells technology, especially that of a proton exchange membrane fuel cell (PEM). It also enables to calculate several...
查看单位
COMPUTER CONTROLLED AERATION UNIT - PEAIC
  • PEAIC
Available
13.3.- 废水处理
PEAIC
计算机控制通风装置
The Computer Controlled Aeration Unit, "PEAIC", allows the study of the oxygen transfer characteristics of diffused air systems and the physical and chemical parameters which influence oxygenation capacity and demonstrates the water aeration...
查看单位
COMPUTER CONTROLLED WIND ENERGY BASIC UNIT - MINI-EEEC
  • MINI-EEEC
Available
5.3.3.- 风能
MINI-EEEC
计算机控制风力发电的基本设备
The Computer Controlled Wind Energy Basic Unit, "MINI-EEEC", has been designed by EDIBON to study wind energy and the influence of some factors on its generation.This unit consists of a transparent tunnel, a wind turbine with rotor to place up to...
查看单位
COMPUTER CONTROLLED WIND ENERGY UNIT - EEEC
  • EEEC
Available
5.3.3.- 风能
EEEC
计算机控制风力能源设备
The Computer Controlled Wind Energy Unit, "EEEC", contains an aerogenerator, in laboratory-scale, and is used to study the conversion of kinetic wind energy into electrical energy and to study the influence of some factors on this generation.The...
查看单位
COMPUTER CONTROLLED ADVANCED OXIDATION UNIT - POAC
  • POAC
Available
13.3.- 废水处理
POAC
计算机控制高级氧化设备
The Computer Controlled Advanced Oxidation Unit, "POAC", designed by EDIBON, generates hydroxyl radicals (OH-) through ultraviolet light radiation with hydrogen peroxide.Raw water is enriched with hydrogen peroxide in a transparent tank and is...
查看单位
COMPUTER CONTROLLED CRITICAL SPEED INVESTIGATION UNIT - MVCC
  • MVCC
Available
7.1.4.- 振动和振荡
MVCC
设备临界速度研究设备，计算机控制
Some phenomena that appear in mechanical systems, such as vibration, self-centering and resonance in rotary shafts, can be clearly demonstrated with the Computer Controlled Critical Speed Investigation Unit, "MVCC".The operation of the "MVCC" unit...
查看单位
COMPUTER CONTROLLED NOISE CONTROL DEMONSTRATION UNIT - TDRC
  • TDRC
Available
7.3.2.2.- 热和声学测试
TDRC
设备噪音控制演示设备，计算机控制
The Computer Controlled Noise Control Demonstration Unit, "TDRC", has been specifically designed to obtain visual and quantitative results related to noise and vibration control.The main parts of the unit are two noise sources consisting of a...
查看单位
CENTRIFUGAL FORCE UNIT - MFCE
  • MFCE
Available
7.1.3.- 静态和动态
MFCE
设备用于离心力研究
The Centrifugal Force Unit, "MFCE", designed by EDIBON, is used to demonstrate the relationship between centrifugal force, rotational speed, mass of a rotating body and distance from the axis.The unit consists of a vertical axis of rotation and a...
查看单位
UNIT FOR THE KINEMATIC STUDY OF GEAR TRAINS - KSGT
  • KSGT
Available
7.1.2.2.- 齿轮
KSGT
设备用于齿轮传动的运动学研究
The Unit for the Kinematic Study of Gear Trains, "KSGT", unit includes a pivoting rail with a fixed axle to which two more axles can be fixed in any position in function of the feature to study.The cogwheels may be assembled on the axles in...
查看单位
  • CMVAS
Available
7.1.4.- 振动和振荡
CMVAS
设备综合机械振动分析
The Comprehensive Mechanical Vibration Analysis Unit, "CMVAS", has been designed by EDIBON for an in-depth study of vibrations in mechanical systems, a phenomenon present in most industrial and engineering processes. These vibrations can lead to...
查看单位
WHIRLING OF SHAFTS UNIT - MEER
  • MEER
Available
7.1.4.- 振动和振荡
MEER
设备轴旋转研究设备
The Whirling of Shafts Unit, "MEER", has been designed by EDIBON to demonstrate and determine different modes of oscillation and resonance of shafts with continuous distribution of mass under different conditions.The operation of the Whirling of...
查看单位
PEM FUEL CELL ADVANCED UNIT - EC6B
  • EC6B
Available
5.3.9.- 氢燃料电池
EC6B
质子交换膜燃料电池组（先进）
The PEM Fuel Cell Advanced Unit, "EC6B", has been designed to allow the students to understand the fuel cells technology, especially that of a proton exchange membrane fuel cell (PEM). It also enables to calculate several fundamental parameters of...
查看单位
PEM FUEL CELL UNIT - EC5B
  • EC5B
Available
5.3.9.- 氢燃料电池
EC5B
质子交换膜燃料电池设备
The PEM Fuel Cell Unit, "EC5B", has been designed by EDIBON to allow the students to understand the fuel cells technology, especially that of a proton exchange membrane fuel cell (PEM). It also enables to calculate several fundamental parameters...
查看单位
COMPUTER CONTROLLED SUPERSONIC WIND TUNNEL (THREE BLOWERS) - TAS25/100C-3B
  • TAS25/100C-3B
Available
8.6.- 空气动力学
TAS25/100C-3B
超音速风洞（三个风扇），电脑控制（PC）
The Computer Controlled Supersonic Wind Tunnel (Three Blowers), "TAS25/100C-3B", designed by EDIBON, is an open wind tunnel for the study of the aerodynamic properties of different drag bodies subject to subsonic and supersonic flows. Airflows...
查看单位
COMPUTER CONTROLLED SUPERSONIC WIND TUNNEL - TAS25/100C
  • TAS25/100C
Available
8.6.- 空气动力学
TAS25/100C
超音速风洞，电脑控制（PC）
The Computer Controlled Supersonic Wind Tunnel, "TAS25/100C", designed by EDIBON, is an open wind tunnel for the study of the aerodynamic properties of different drag bodies subject to subsonic and supersonic flows. Air flows through a vacuum...
查看单位
ROLLING FRICTION IN WHEELS - MEMT-4
Available
7.1.5.- 摩擦学 (摩擦, 磨损, 润滑)
MEMT-4
车轮的滚动摩擦
配件 MEMT
This module allows to determine the slip forces between two rotating friction discs in contact.The slip between the discs is maintained constant by a gearbox. The pressure can be adjusted with a lever and a set of weights. The unit includes a...
查看单位
ROTAMETER - FME36
  • FME36
Available
8.1.2.- 测量
FME36
转子流量计
The Rotameter, "FME36", designed by EDIBON, is a device developed for the study of flow measurement in fluid systems. This unit allows students to analyze the operating principle of variable area flowmeters with a float, which are widely used in...
查看单位
TACHOMETER TEST MODULE - BS7
  • 配件 BS
Available
6.1.2.1.- 传感器和电子仪器
BS7
转速计测试模块
配件 BS
The Tachometer Test Module, "BS7", has been designed to teach linear and angular speed measurement techniques. In this module placed on the upper part we have a miniature motor used to move the axle. The motor speed can be changed adjusting the...
查看单位
AXIAL FLOW TURBINE - FME27
  • FME27
Available
8.1.7.- 液压机: 涡轮机
FME27
轴流式水轮机
With the Axial Turbine, "FME27", designed by EDIBON, it is possible to study and to understand the axial flow turbines which, unlike the radial flow turbines, the working fluid is parallel to the axis of rotation.This unit consists of an axial...
查看单位
COMPUTER CONTROLLED AXIAL PUMP BENCH - PBAC
  • PBAC
Available
8.7.1.- 帮浦
PBAC
轴流泵测试台，通过计算机控制（PC）
The Computer Controlled Axial Pump Bench, "PBAC", has been designed by EDIBON to study this type of pumps. It is a bench-top unit that consists of a computer controlled axial pump, a water tank and circulation pipes with a flow regulation valve....
查看单位
COMPUTER CONTROLLED AXIAL FLOW TURBINE - TFAC
  • TFAC
Available
5.3.6.- 液压能源
TFAC
轴流涡轮机，电脑控制（PC）
The Computer Controlled Axial Flow Turbine, "TFAC", consists of a small-scale turbine with single-stage axial flow input. It has eight nozzles that act as water rings to the rotor, four of which have an incidence angle of 20º and the other four of...
查看单位
RADIATION HEAT TRANSFER MODULE FOR TSTCB - TXC/RCB
Available
9.6.- 传播热量
TXC/RCB
辐射传热设备（用于TSTCB）
配件 TSTCB
The Radiative Heat Transfer Unit for TSTCB, "TXC/RCB", enables the study of the principles of heat transfer and exchange by radiation.Bench-top unit designed to demonstrate the laws of radiant heat transfer and radiant heat exchange.It basically...
查看单位
RADIATION HEAT TRANSFER MODULE FOR TSTCC - TXC/RC
Available
9.6.- 传播热量
TXC/RC
辐射传热设备（用于TSTCC）
配件 TSTCC
The Radiation Heat Transfer Unit for TSTCC, "TXC/RC," allows the study of the principles of heat transfer and exchange by radiation.Bench-top unit designed to demonstrate the laws of radiant heat transfer and radiant heat exchange.
查看单位
SWITCHING IN TRANSMISSION AND DISTRIBUTION SUBSTATIONS APPLICATION - AEL-SST-01
  • AEL-SST-01
Available
5.1.3.3.- 功率和负载分配
AEL-SST-01
输电和配电变电站操作应用
The Switching in Transmission and Distribution Substations Application, "AEL-SST-01", has been developed by EDIBON to study the most common operations carried out in these substations, such as, transference of the electrical service from the first...
查看单位
TRANSMISSION LINES UNIT - ELT
  • ELT
Available
3.2.1.- 调制, 编码和信号处理理论
ELT
输电线路设备
The Transmission Lines Unit, "ELT", has been designed by EDIBON to study a standardized coaxial line to analyze realistic measurements.The Transmission Lines Unit "ELT" has been designed as integrated unit for help the student to understand the...
查看单位
APPLICATIONS FOR PROCESS CONTROL - APC
  • APC
Available
10.3.- 工业应用和系统
APC
过程控制应用
The Applications for Process Control, "APC", designed by EDIBON, allows the student to design, assemble and configure various control systems, apart from studying the fundamentals of the control engineering on which they are based.These...
查看单位
COMPUTER CONTROLLED PROCESS CONTROL (SPEED CONTROLLER) - UCPCV
  • UCPCV
Available
6.1.1.3.- 工业系统应用
UCPCV
过程控制（变频器），由计算机控制（PC）
The Computer Controlled Process Control Unit (Speed Controller), "UCPCV", designed by EDIBON, allows the study of several types of automatic control and can be used to control different variables (flow, level, temperature, pressure, pH,...
查看单位
COMPUTER CONTROLLED PROCESS CONTROL (PNEUMATIC VALVE) - UCPCN
  • UCPCN
Available
6.1.1.3.- 工业系统应用
UCPCN
过程控制（气动阀），由计算机控制（PC）
The Computer Controlled Process Control (Pneumatic Valve), "UCPCN", designed by EDIBON, allows the study of several types of automatic control and can be used to control different variables (flow, level, temperature, pressure, pH, conductivity and...
查看单位
要求信息