销售冠军
Showing 211-240 of 916 item(s)
12 24 36
SPLIT AIR CONDITIONER UNIT - TACS
  • TACS
Available
9.2.- 加热, 通风, 空调和热水
TACS
Split Air Conditioner Unit
The Split Air Conditioner Unit, "TACS", designed by EDIBON allows the study of the operation of a split system air conditioner with heat pump function to heat or cool, apart from other operation modes available.The main element of the Split Air...
查看单位
STATIC AND DYNAMIC BALANCING UNIT - MED
  • MED
Available
7.1.3.- 静态和动态
MED
Static and Dynamic Balancing Unit
The Static and Dynamic Balancing Unit, "MED", developed by EDIBON is a unit to study and analyze the oscillations and vibrations and how to eliminate or diminish them.Basically, the unit is formed by a shaft mounted on bearings. The shaft is...
查看单位
STATICS EXPERIMENTS - MECA1
Available
7.1.1.- 机械基础套件
MECA1
Statics Experiments
配件 LIMEBA
Statics is the part of Mechanics that studies any kind of structure or element in balance-equilibrium.Basically the module consist on experiments in which the student shall learn to deduce the main principles of Statics and its most important...
查看单位
STRESS HYPOTHESES UNIT - STH
  • STH
Available
7.1.6.- 结构力学
STH
Stress Hypotheses Unit
The Stress Hypotheses Unit, "STH", allows the study and testing of stress hypotheses by applying loads in different directions on a test specimen point and measuring the deformations produced.Normal and shear stresses are applied, avoiding...
查看单位
TEMPERATURE MEASUREMENT TRAINING UNIT - TEMT
  • TEMT
Available
9.10.3.- 安装和维护惯例
TEMT
Temperature Measurement Training Unit
The Temperature Measurement Training Unit, "TEMT", allows to compare the response of several devices to measure the temperature for different flows and different installation position of these devices.The unit includes four different measuring...
查看单位
TEMPERATURE MEASUREMENT UNIT - TMT
  • TMT
Available
9.1.- 热力学的基本原理和基本概念
TMT
Temperature Measurement Unit
The Temperature Measurement Unit, "TMT", works as a temperature meter that uses different temperatures measuring devices to compare, check and analyze the temperature and how is the precision for the measure and for the device that the student has...
查看单位
TENSILE TESTER UNIT - MTTU
  • MTTU
Available
7.3.2.1.- 机械测试
MTTU
Tensile Tester Unit
With the Tensile Tester Unit, "MTTU", designed by EDIBON, tensile test can be performed. A specimen made of different materials is subjected to an increasing axial tensile stress till failure. This unit allows the user to perform tensile tests...
查看单位
THICK WALLED CYLINDER UNIT - MCPG
  • MCPG
Available
7.1.6.- 结构力学
MCPG
Thick Walled Cylinder Unit
In the Thick-Walled Cylinder Unit, "MCPG", the stresses are determined through the measurement of the strains produced on the surface. These strains are measured by strain gauges.The thick-walled vessel consists of an aluminum cylinder of length...
查看单位
TORSION TEST UNIT (30NM) - MTT
  • MTT
Available
7.3.2.1.- 机械测试
MTT
Torsion Test Unit (30Nm)
To perform the tests, the test specimen is clamped and twisted by means of a flywheel and a worm gear until it breaks. The force is gradually applied to the specimen to observe the elastic strain produced. The specimen will deform and manifest...
查看单位
TRANSMISSIONS EXPERIMENTS - MECA3
Available
7.1.1.- 机械基础套件
MECA3
Transmissions Experiments
配件 LIMEBA
Most recent machines require the transmission of motion between elements to obtain the desired mechanical result. The mechanisms studied in this module are those that transmit motion between two axles.
查看单位
TRIBOLOGY MODULAR UNIT - MEMT
  • MEMT
Available
7.1.5.- 摩擦学 (摩擦, 磨损, 润滑)
MEMT
Tribology Modular Unit
The Tribology Modular Unit, "MEMT", designed by EDIBON, consists of a base unit with electronic console and a series of experimental units to investigate and visualize tribological phenomena.MEMT-UB. Drive Unit for Tribological Tests. This unit is...
查看单位
METACENTRIC HEIGHT DEMOSTRATION OF A "U" SHAPED FLOATING BODY - FME11-B
  • FME11-B
Available
8.1.3.- 静水的
FME11-B
U 形漂浮物的元心高度演示
The Metacentric Height Demostration of a "U" Shaped Floating Object, "FME11-B", designed by EDIBON, allows the study of the stability of a floating object by calculating its metacentric height starting from a U-shaped floating body.The unit...
查看单位
UNIT FOR STUDYING BEARING FRICTION - MBF
  • MBF
Available
7.1.5.- 摩擦学 (摩擦, 磨损, 润滑)
MBF
Unit for Studying Bearing Friction
The Unit for Studying Bearing Friction, "MBF", has been designed by EDIBON to study sliding friction in slide bearings and rolling bearings. Since rolling friction is very little, rotational dynamics basic tests can be performed with the inertia...
查看单位
UNIT FOR STUDYING FORCES IN A JIB CRANE - MFPG
  • MFPG
Available
7.1.6.- 结构力学
MFPG
Unit for studying Forces in a Jib Crane
The Unit for studying Forces in a Jib Crane, "MFPG", is designed to study the tensile and compressive forces in a planar central force system based on the example of a crane jib.The unit represents a planar central force system in which multiple...
查看单位
UNIT FOR STUDYING FORCES IN A SIMPLE BAR STRUCTURE - MFBS
  • MFBS
Available
7.1.6.- 结构力学
MFBS
Unit for studying Forces in a Simple Bar Structure
The Unit for Studying Forces in a Simple Bar Structure, "MFBS", designed by EDIBON allows the study of forces acting on a simple truss when is subjected to a point load in one of the nodes that make up the structure.It consists of a group of five...
查看单位
UNIT TO STUDY A CONTROL GEAR CUTAWAY MODEL - CGCM
Available
7.4.1.- 分段模型
CGCM
Unit to Study a Control Gear Cutaway Model
配件 CMTM
The Unit to Study a Control Gear Cutaway Model provides an in-depth analysis of these gears, which are designed to adjust the spacing between teeth, ensuring precise control in various mechanical applications.These gears are essential in precision...
查看单位
UNIT TO STUDY A MITRE GEAR CUTAWAY MODEL - MGCM
Available
7.4.1.- 分段模型
MGCM
Unit to Study a Mitre Gear Cutaway Model
配件 CMTM
The Unit to Study a Mitre Gear Cutaway Model provides a detailed study of this transmission system, composed of two conical cogwheels, designed to transmit motion between two intersecting shafts, usually positioned at a right angle.Due to their...
查看单位
UNIT TO STUDY A MULTIPLE-DISC CLUTCH CUTAWAY MODEL - DCCM
Available
7.4.1.- 分段模型
DCCM
Unit to Study a Multiple-Disc Clutch Cutaway Model
配件 CMTM
The Unit to Study a Multiple-Disc Clutch Cutaway Model provides insight into the operation of this clutch system, which uses multiple friction discs to increase torque transmission capacity.This type of clutch is widely used in chain tractor...
查看单位
UNIT TO STUDY A PLANETARY GEAR CUTAWAY MODEL - PGCM
Available
7.4.1.- 分段模型
PGCM
Unit to Study a Planetary Gear Cutaway Model
配件 CMTM
The Unit to Study a Planetary Gear Cutaway Model provides an in-depth analysis of this type of transmission, which consists of one or more external (planet) gears rotating around a central (sun) gear.Planetary gears are widely used in vehicle...
查看单位
UNIT TO STUDY A SPUR GEAR CUTAWAY MODEL - SGCM
Available
7.4.1.- 分段模型
SGCM
Unit to Study a Spur Gear Cutaway Model
配件 CMTM
The Unit to Study a Spur Gear Cutaway Model provides insight into the operation of this transmission system, characterized by teeth parallel to the axis of rotation, allowing for direct power transmission with high efficiency.This type of gear is...
查看单位
UNIT TO STUDY A TWO-STAGE SPUR GEAR CUTAWAY MODEL - SGCM/2
Available
7.4.1.- 分段模型
SGCM/2
Unit to Study a Two-Stage Spur Gear Cutaway Model
配件 CMTM
The Unit to Study a Two-Stage Spur Gear Cutaway Model provides an in-depth analysis of these systems, which utilize two pairs of spur gears in series to achieve greater speed reduction and more efficient torque transmission.These systems are...
查看单位
UNIT TO STUDY A WORM GEAR CUTAWAY MODEL - WGCM
Available
7.4.1.- 分段模型
WGCM
Unit to Study a Worm Gear Cutaway Model
配件 CMTM
The Unit to Study a Worm Gear Cutaway Model provides insight into the operation of this transmission system, consisting of a helical worm screw and a circular cogwheel.This type of transmission is widely used in automatic doors, elevators, and...
查看单位
UNIT TO STUDY ROTATIONAL INERTIA - SRI
  • SRI
Available
7.1.3.- 静态和动态
SRI
Unit to Study Rotational Inertia
The Unit to Study Rotational Inertia, "SRI", has been designed to carry out tests to analyze the moments of inertia of a solid and a hollow cylinder, both with same mass and diameter. The moment of inertia of another hollow cylinder with different...
查看单位
UNIVERSAL BUCKLING UNIT - MUP
  • MUP
Available
7.3.2.1.- 机械测试
MUP
Universal Buckling Unit
The Universal Buckling Unit "MUP" is a bench-top unit whose frame is made of anodized aluminum profiles and plates and steel elements, on which a bubble level is installed to equilibrate the system.The unit has been designed to carry out tests...
查看单位
U-SHAPE MANOMETER - HMM-U1000
Available
8.2.- 度量衡
HMM-U1000
U型压力计
配件 HMM
The U-Shape Manometer, "HMM-U1000," designed by EDIBON, allows the study of various pressures and their relationship with the fluid. It measures the difference in liquid level in its columns, providing vital information for pressure analysis in...
查看单位
METACENTRIC HEIGHT DEMOSTRATION OF A "V" SHAPED FLOATING BODY - FME11-A
  • FME11-A
Available
8.1.3.- 静水的
FME11-A
V "型浮动物体的元心高度演示
The Metacentric Height Demostration of a "V" Shaped Floating Object, "FME11-A", designed by EDIBON, allows the study of the stability of a floating object by calculating the metacentric height of a floating object starting from a V-shaped floating...
查看单位
要求信息