Verkaufshits

211 - 240 von 921 Artikel(n)

Available

8.5.- HYDRAULISCHE KANÄLE

CFG

Fluidkanäle

Channel made up of group of modular parts of 2.5 m long. Each rectangular piece of different sections with transparent walls of 10 mm thick is made in such a way that guarantees a uniform section along the entire channel. All the sections are made...

Available

8.5.- HYDRAULISCHE KANÄLE

Fluidkanäle (Sektion: 80X300 mm)

Channel, through which water flows, of rectangular section with transparent walls that enable to observe all the experiments. Water is taken from the storage tank by means of a hydraulic pump and, by the pipe, it is driven to the inlet tank, where...

COMPUTER CONTROLLED FLOW CHANNELS (SECTION: 80 X 300 MM) - CFC

Available

8.5.- HYDRAULISCHE KANÄLE

CFC

Fluidkanäle (Sektion: 80X300 mm), Computergesteuert (PC)

Channel, through which water flows, of rectangular section with transparent walls that enable to observe all the experiments. Water is taken from the storage tank by means of a hydraulic pump, with speed regulation, and, by the pipe, it is driven...

COMPUTER CONTROLLED FLOW CHANNELS - CFGC

CFGC

Available

8.5.- HYDRAULISCHE KANÄLE

CFGC

Fluidkanäle, Computergesteuert (PC)

The Computer Controlled Flow Channels, "CFGC", are hydrodynamic channels to perform multiple hydraulic tests. They consist of a rectangular section channel with tempered glass transparent walls through which water flows. Water is impelled by a...

Available

13.1.- HYDROLOGIE UND HYDROGEOLOGIE

RFS

Fluss-Simulator für Flüsse

The River Flow Simulator, "RFS", designed by EDIBON, allows the simulation and study of the river features, included the flow and solid bed load motion.The main element is a rectangular tank made of stainless steel supported on a metal beam frame,...

ADVANCED POWER FACTOR COMPENSATION APPLICATION - AEL-EECFP

AEL-EECFP

Available

5.1.3.3.- STROM- UND LASTVERTEILUNG

AEL-EECFP

Fortgeschrittene Anwendung der Leistungsregelungsfaktors

Industrial customers use three-phase power consumption with different power factors. If their power factor drops below a prescribed value, power losses in transmission lines increase. For this reason, the customers have to pay a penalty. In order...

ADVANCED AC ELECTRICAL MOTORS APPLICATION - AEL-ACEMT

AEL-ACEMT

Available

4.3.2.1.- AC-ELEKTROMOTOREN UND GENERATOREN

AEL-ACEMT

Fortgeschrittene Anwendung von Dreiphasen-Wechselstrom-Elektromotoren

The Advanced AC Electrical Motors Application, "AEL-ACEMT", has been designed by Edibon to carry out electrical/mechanical test for a great variety of AC motors. Such tests allow obtaining the most significant electrical and mechanical...

ADVANCED MECHANICAL, ELECTRICAL AND SMART GRID POWER SYSTEMS (UTILITIES) - APS12

APS12

Available

5.1.1.- INTELLIGENTE NETZE UND ENERGIESYSTEME (ENERGIEUNTERNEHMEN)

APS12

Fortgeschrittene mechanische und elektrische Leistungssysteme für intelligente Netze (EVU)

Advanced Mechanical, Electrical and Smart Grid Power Systems (Utilities), "APS12", designed by EDIBON, are recognized as one of the most advanced and comprehensive systems on the market. Unlike other simulators, the Advanced Mechanical, Electrical...

EC6B

Available

5.3.9.- WASSERSTOFFKRAFTSTOFFZELLEN

EC6B

Fortgeschrittenes Gerät für PEM-Brennstoffzellen

The PEM Fuel Cell Advanced Unit, "EC6B", has been designed to allow the students to understand the fuel cells technology, especially that of a proton exchange membrane fuel cell (PEM). It also enables to calculate several fundamental parameters of...

COMPUTER CONTROLLED PEM FUEL CELL ADVANCED UNIT - EC6C

EC6C

Available

5.3.9.- WASSERSTOFFKRAFTSTOFFZELLEN

EC6C

Fortgeschrittenes Gerät für PEM-Brennstoffzellen, computergesteuert (PC)

The Computer Controlled PEM Fuel Cell Advanced Unit, "EC6C", has been designed by EDIBON to allow the students to understand the fuel cells technology, especially that of a proton exchange membrane fuel cell (PEM). It also enables to calculate...

REFRIGERATION OR HEATING WATER RECIRCULATION ADVANCED UNIT - TERA/A

TERA/A

Available

DIENSTLEISTUNGSMODULE

TERA/A

Fortschrittliches Gerät für die Umlaufkühlung oder -heizung von Wasser

The Refrigeration or Heating Water Recirculation Advanced Unit, "TERA/A", is a reversible heat pump, which allows heating and cooling a volume of water for the study of heat transfer and temperature regulation of a fluid. Using a constant flow of...

COMPUTER CONTROLLED ADVANCED INDUSTRIAL SERVOSYSTEMS UNIT (FOR AC MOTORS) - SERIN/CA

SERIN/CA

Available

6.1.2.2.- LEISTUNGSELEKTRONIK UND INDUSTRIELLE ELEKTRONIK

SERIN/CA

Fortschrittliches Gerät für industrielle Servosysteme (AC-Motoren), computergesteuert (PC)

The Computer Controlled Advanced Industrial Servosystems Unit (for AC Motors), "SERIN/CA", has been designed by EDIBON for the detailed study of the three main control methods used in servomechanisms: position control, speed control, and torque...

COMPUTER CONTROLLED ADVANCED INDUSTRIAL SERVOSYSTEM UNIT (FOR DC MOTORS) - SERIN/CC

SERIN/CC

Available

6.1.2.2.- LEISTUNGSELEKTRONIK UND INDUSTRIELLE ELEKTRONIK

SERIN/CC

Fortschrittliches Gerät für industrielle Servosysteme (DC-Motoren), computergesteuert (PC)

The Computer Controlled Advanced Industrial Servosystem Unit (for DC Motors), "SERIN/CC", has been designed by EDIBON to allow to perform different practices related to servomotors to be carried out. The unit has different modules to develop...

ADVANCED COMPUTER CONTROLLED CONTINUOUS DESTILLATION UNIT - UDCC/A

UDCC/A

Available

11.1.4.- DISTILLATION AND CRACKING

UDCC/A

Fortschrittliches Gerät für kontinuierliche Destillation, computergesteuert (PC)

The Advanced Computer Controlled Continuous Distillation Unit "UDCC/A" is an installation that allows the study of fractional distillation using a packed column which is able to operate with different packings.There is a feeding system that...

ADVANCED COMPUTER CONTROLLED DEODORIZING UNIT - AEDC/A

AEDC/A

Available

PILOTANLAGEN FÜR ÖLE

AEDC/A

Fortschrittliches Gerät zur Desodorierung, Computergesteuert (PC)

The Advanced Computer Controlled Deodorizing Unit, "AEDC/A", designed by EDIBON is a unit that allows the study and research of the continuous deodorization operation capable of performing a vacuum and high temperature distillation with steam.In...

COMPUTER CONTROLLED FRANCIS TURBINE - TFC

Available

5.3.6.- HYDRAULISCHE ENERGIE

TFC

Francis-Turbine, computergesteuert (PC)

The Computer Controlled Francis Turbine, "TFC", consists of a small-scale Francis Turbine, with a valve that allows flow regulation and has a ring with adjustable guide vanes that allows control of the angle of incidence of the water in the...

UNDERFLOOR HEATING AND/OR HEAT SOURCE FOR HEAT PUMP - UHHS

UHHS

Available

9.3.- WÄRMEPUMPEN

UHHS

Fußbodenheizung und/oder Wärmequelle für Wärmepumpe

The Underfloor Heating and/or Heat pump Heat Source, "UHHS" is a laboratory unit designed to study and demonstrate the operation of underfloor heating installations and constitutes an essential tool in research and training in the field of heating...

COMPUTER CONTROLLED GAS WASHING PROCESSING PLANT - PLGC

PLGC

Available

11.1.8.- ABSORPTION AND ADSORPTION

PLGC

Gaswäscheranlage, computergesteuert (PC)

The Computer Controlled Gas Washing Processing Plant, "PLGC", has a water feed tank, from which and by means of a water pump, the water is pumped to the upper part of a column. The solids are added by means of a solid dosing system to the air...

PCGC

Available

11.1.11.- FILTRATION, SEDIMENTATION AND MIXING

PCGC

Gaszyklon, computergesteuert (PC)

The Computer Controlled Gas Cyclone, "PCGC", is a unit designed to study the separation of heterogeneous mixtures through a cyclone, specifically those made up of a thin material (4 μm – 400 μm) and an air flow. The cyclone, the main component of...

BLIO

Available

11.1.7.- DRYING AND COOLING

BLIO

Gefriertrockner

The Freeze-Dryer, "BLIO", is able to carry out the freeze-drying process for the drying of different products inside a transparent chamber that allows the control of the pressure, and on heatable trays that allow to control the temperature of the...

COMPUTER CONTROLLED COUPLED TANKS SYSTEM - CTAC

CTAC

Available

6.1.1.3.- INDUSTRIELLE SYSTEMANWENDUNGEN

CTAC

Gekoppeltes Tanksystem, gesteuert über Computer (PC)

The Computer Controlled Coupled Tanks System, "CTAC", consists of four transparent tanks, each with a pressure sensor to measure the water level.The coupling configuration between tanks can be modified by the use of computer controlled solenoid...

Available

7.1.2.1.- MECHANISMEN

MME

Genfer Stopp-Mechanismus

The Geneva Stop Mechanism, "MME", designed by EDIBON, is a mechanism that transforms continuous circular motion into intermittent motion. It is a positive drive in which the driven wheel is positively moved or locked.It is made of aluminum and...

FME27

Available

8.1.7.- HYDRAULISCHE MASCHINEN: TURBINEN

FME27

Gerät der Axialströmungsturbine

With the Axial Turbine, "FME27", designed by EDIBON, it is possible to study and to understand the axial flow turbines which, unlike the radial flow turbines, the working fluid is parallel to the axis of rotation.This unit consists of an axial...

CAVITATION PHENOMENON DEMONSTRATION - FME19

FME19

Available

8.1.4.- HYDRODYNAMIK

FME19

Gerät der Demonstration der Kavitation

The Cavitation Phenomenon Demonstration unit, "FME19", designed by EDIBON is composed of a Venturi tube with a rectangular cross section, one of its sides being transparent, allowing a better visualization of the cavitation phenomenon.It includes...

FME20

Available

8.1.5.- FLUSSVISUALISIERUNG

FME20

Gerät der Demonstration der laminaren Strömung

The Laminar Flow Demostration unit, "FME20", designed by EDIBON, allows a complete study of the bi-dimensional problems associated with laminar flow. Thanks to an efficient system of dye injection we can observe the different models of flow. It...

METACENTRIC HEIGHT DEMONSTRATION - FME11

FME11

Available

8.1.3.- HYDROSTATISCH

FME11

Gerät der Demonstration der Metazentrischen Höhe

The Metacentric Height Demonstration Unit, "FME11", designed by EDIBON, allows the study of the stability of a floating object by calculating its metacentric height.The unit consists of a floating methacrylate prismatic base, on which a vertical...

METACENTRIC HEIGHT DEMOSTRATION OF A "U" SHAPED FLOATING BODY - FME11-B

FME11-B

Available

8.1.3.- HYDROSTATISCH

FME11-B

Gerät der Demonstration der metazentrischen Höhe eines U-förmigen schwimmenden Körpers

The Metacentric Height Demostration of a "U" Shaped Floating Object, "FME11-B", designed by EDIBON, allows the study of the stability of a floating object by calculating its metacentric height starting from a U-shaped floating body.The unit...

METACENTRIC HEIGHT DEMOSTRATION OF A "V" SHAPED FLOATING BODY - FME11-A

FME11-A

Available

8.1.3.- HYDROSTATISCH

FME11-A

Gerät der Demonstration der metazentrischen Höhe eines V-förmigen schwimmenden Körpers

The Metacentric Height Demostration of a "V" Shaped Floating Object, "FME11-A", designed by EDIBON, allows the study of the stability of a floating object by calculating the metacentric height of a floating object starting from a V-shaped floating...

FÜR WEITERE INFORMATIONEN, KONTAKTIEREN SIE UNS