14.2.1.- THEORETISCH-PRAKTISCHE GRUNDLAGEN

THEORETISCH-PRAKTISCHE GRUNDLAGEN UNITS
1 - 28 von 28 Artikel(n)
BASIC ELECTRONICS AND ELECTRICITY LABORATORY - LIEBA
  • LIEBA
Available
14.2.1.6.- LEISTUNGSELEKTRONIK
LIEBA
Integriertes Basiselektronik und -stromlaboratorium:
We present a flexible and modular-based system for learning basic electronics, basic electricity and circuit theory. The advantage given by this learning and teaching system is that the student establishes his own rhythm, thus rendering...
DIRECT CURRENT (DC) CIRCUITS MODULE - N-M1
  • N-M1
Available
14.2.1.1.- GRUNDLEGENDE ELEKTRISCHE GESETZKONZEPTE
N-M1
Direct Current (DC) Circuits Module
For the correct understanding of electronics it is necessary to know some fundamental laws and theorems such as Ohm’s Law, Kirchhoff’s Laws and other simple theorems of initiation to D.C. circuits.With Direct Current (D.C.) Circuits Module,...
ALTERNATING CURRENT (AC) CIRCUITS MODULE - N-M2
  • N-M2
Available
14.2.1.1.- GRUNDLEGENDE ELEKTRISCHE GESETZKONZEPTE
N-M2
Alternating Current (AC) Circuits Module
In contrast to DC, which always has the same direction and sense, in AC the flow of electrons changes direction periodically with a frequency of 50 or 60 Hz (depending on the country).With Alternating Current (AC) Circuits Module, "N-M2", designed...
ELECTRIC NETWORKS MODULE - N-M16
  • N-M16
Available
14.2.1.1.- GRUNDLEGENDE ELEKTRISCHE GESETZKONZEPTE
N-M16
Electric Networks Module
After studying the basic knowledge of electrical networks, we must understand and investigate the dependence between current and voltage applied to different electrical devices.With the Electric Networks Module, "N-M16", designed by EDIBON, it is...
ELECTROMAGNETISM MODULE - N-M17
  • N-M17
Available
14.2.1.1.- GRUNDLEGENDE ELEKTRISCHE GESETZKONZEPTE
N-M17
Electromagnetism Module
Electromagnetism is the interaction between electric charges. It is described in terms of charges interacting between of electric and magnetic fields.With the Electromagnetism Module, "N-M17", designed by EDIBON, the operation of electromagnetic...
THREE-PHASE CIRCUITS MODULE - N-M18
  • N-M18
Available
14.2.1.1.- GRUNDLEGENDE ELEKTRISCHE GESETZKONZEPTE
N-M18
Three-phase Circuits Module
Three-phase voltage is essentially a system of three alternating voltages, coupled (all 3 are produced simultaneously in a generator) and 120º out of phase with each other (i.e. one third of the period).The Three-phase Circuits Module, "N-M18",...
OSCILLATORS MODULE - N-M6
  • N-M6
Available
14.2.1.2.- ANALOGE ELEKTRONIK
N-M6
Oscillators Module
Oscillators operation is usually very similar in all of them: the oscillating circuit produces an oscillation, then the amplifier increases it and finally the feedback network takes a part of the energy from the oscillating circuit and introduces...
OPERATIONAL AMPLIFIERS MODULE - N-M7
  • N-M7
Available
14.2.1.2.- ANALOGE ELEKTRONIK
N-M7
Operational Amplifiers Module
Operational amplifiers are compact, active, linear and high-gain devices designed to provide the desired transfer function. An operational amplifier consists of an electronic circuit having two inputs and one output. The output is the difference...
FILTERS MODULE - N-M8
  • N-M8
Available
14.2.1.2.- ANALOGE ELEKTRONIK
N-M8
Filters Module
An electronic filter is an element that allows electrical signals to pass through it, at a specific frequency or frequency ranges while preventing the passage of others, being able to modify both, their amplitude and phase. It is a device that...
ANALOG/DIGITAL CONVERTERS MODULE - N-M60
  • N-M60
Available
2.3.3.- DIGITALE ELEKTRONIK
N-M60
Analog/Digital Converters Module
Most of the "information" generated in the world by various physical phenomena has a strong analogical character. This means that the information undergoes a continuous variation within certain limits determined over time. Of course, there is also...
DIGITAL/ANALOG CONVERTERS MODULE - N-M61
  • N-M61
Available
2.3.3.- DIGITALE ELEKTRONIK
N-M61
Digital/Analog Converters Module
Digital/analog conversion happens when you want to recover or re-obtain a digital signal that has been processed and we want to regenerate it. A signal that has been sampled, for example, a temperature signal and we need to return it to the...
DIGITAL SYSTEMS & CONVERTERS MODULE - N-M10
  • N-M10
Available
14.2.1.3.- DIGITALE ELEKTRONIK
N-M10
Digital Systems & Converters Module
Generally, an analog to digital converter is an electronic device that converts an analog voltage input to a digital number.digital number. The digital output can use different coding schemes, such as binary, although some non-electrical or...
DIGITAL ELECTRONICS FUNDAMENTALS MODULE - N-M11
  • N-M11
Available
14.2.1.3.- DIGITALE ELEKTRONIK
N-M11
Digital Electronics Fundamentals Module
Digital systems are systems for processing, treatment or transmission of information, in which such information is limited to take values in a discrete set. These signals (whose magnitude can only take one value from a discrete set of values) are...
BASIC COMBINATIONAL CIRCUITS MODULE - N-M12
  • N-M12
Available
14.2.1.3.- DIGITALE ELEKTRONIK
N-M12
Basic Combinational Circuits Module
A combinational circuit is an electronic circuit in which the value of its outputs at a given instant, depends on the value of the inputs at the same instant. In other words, it is a circuit that has no memory. Combinational circuits work with...
BASIC SEQUENTIAL CIRCUITS MODULE - N-M13
  • N-M13
Available
14.2.1.3.- DIGITALE ELEKTRONIK
N-M13
Basic Sequential Circuits Module
Logic gates and the circuits created with them constitute combinational logic, so called because the output only depends on the combination of the input variables present.There is a second group of logic circuits called sequential logic, so called...
SEMICONDUCTORS I MODULE - N-M3
  • N-M3
Available
14.2.1.4.- HALBLEITER
N-M3
Semiconductors I Module
Semiconductors are materials characterized by a resistivity lower than an insulator and higher than a conductor. There are different types of semiconductors, among which we could highlight diodes as extrinsic semiconductors (formed by more than...
SEMICONDUCTORS II MODULE - N-M4
  • N-M4
Available
14.2.1.4.- HALBLEITER
N-M4
Semiconductors II Module
To improve and extend the characteristics of the input signals, it is possible to use two or more transistors. Thus, you may want to build an amplifier in which you want to increase the input impedance without decreasing the gain. The solution to...
OPTOELECTRONICS MODULE - N-M14
  • N-M14
Available
14.2.1.4.- HALBLEITER
N-M14
Optoelectronics Module
Optoelectronics is the link between optical systems and electronic systems. Optoelectronic components are those whose operation is directly related to light.They are semiconductor devices capable of producing light radiation within the human...
APPLICATIONS OF LIGHT - M44
  • M44
Available
14.2.1.5.- INSTRUMENTATION & KONTROLLE
M44
Einwirkung von Licht
This unit allows different practices related to the measurement of light intensity to be carried out. Photodiodes are semiconductor light sensors that generate a current or voltage when the P-N junction in the semiconductor is illuminated with...
LINEAR POSITION AND FORCE - M45
  • M45
Available
14.2.1.5.- INSTRUMENTATION & KONTROLLE
M45
Lineare Position und Kraft
Linear Variable Displacement Transducers (LVDT) provide a certain amount of voltage output relative to the parameters being measured, for example force, for signal conditioning.With Linear Position and Force Unit, "M45", designed by EDIBON, it is...
ENVIRONMENTAL MEASUREMENTS - M46
  • M46
Available
14.2.1.5.- INSTRUMENTATION & KONTROLLE
M46
Umweltmesstechnik
Environmental measurement is a data collection process. In other words, it is a continuous and systematic follow-up study of environmental variables (air quality and speed, humidity, pressure, etc.). The aim is to identify and evaluate...
ROTATIONAL SPEED & POSITION CONTROL - M47
  • M47
Available
14.2.1.5.- INSTRUMENTATION & KONTROLLE
M47
Drehzahl- und Positionssteuerung
The unit is equipped with a DC motor whose rotation speed can be controlled by the supply voltage. The following sensors are arranged along the motor shaft: optical slot sensor, inductive sensor, infrared reflection sensor, Hall effect sensor,...
SOUND MEASUREMENTS - M48
  • M48
Available
14.2.1.5.- INSTRUMENTATION & KONTROLLE
M48
Tonmessungen
With the Sound Measurement Unit, "M48", designed by EDIBON, different practices related to sound measurements can be carried out. The unit has three different types of components: two types of microphones and a loudspeaker.
APPLICATIONS OF TEMPERATURE AND PRESSURE MODULE - N-M49
  • N-M49
Available
2.3.5.- INSTRUMENTATION & KONTROLLE
N-M49
Applications of Temperature and Pressure Module
A transducer is a device that is capable of transforming or converting a certain type of input energy into a different one at the output. Depending on the application they have, the name itself will indicate the type of conversion it performs, for...
POWER ELECTRONICS MODULE - N-M9
  • N-M9
Available
14.2.1.6.- LEISTUNGSELEKTRONIK
N-M9
Power Electronics Module
Semiconductors used in power electronics operate as switches and therefore it is interesting to know the conduction characteristics, switching and control methods.With Power Electronics Module, "N-M9", designed by EDIBON, the operation of MOSFET...
POWER SUPPLIES MODULE - N-M5
  • N-M5
Available
14.2.1.6.- LEISTUNGSELEKTRONIK
N-M5
Power Supplies Module
With the Power Supplies Module "N-M5", designed by EDIBON, symmetrical voltage regulators, operation of fixed, symmetrical and switched-mode power supplies as well as rectification (conversion of an AC voltage to a DC voltage) can be studied.In...
COMPUTER CONTROLLED A/D AND D/A CONVERTERS UNIT - CADDA
  • CADDA
Available
14.2.1.3.- DIGITALE ELEKTRONIK
CADDA
Computergesteuerte A/D- und D/A-Wandlereinheit (PC)
The Computer Controlled A/D and D/A Converters Unit, "CADDA", unit has been designed to help the students to learn how to perform the most common procedures and study the different circuits used to convert analog signals in a digital signals and...
Informationen anfordern