8.7.- FLÜSSIGKEITSMASCHINEN

Ein spezieller Anwendungsbereich im Bereich Fluid Mechanik ist für die Untersuchung von Fluid Maschinen zuständig. Fluidmaschinen sind Vorrichtungen, die die Energie des Fluids, das sie durchläuft, umwandeln oder Energie auf das Fluid übertragen. Dieses Fluid kann Gas, Dampf oder Flüssigkeit sein.

Mehr sehen

Ausgehend von dieser Definition lassen sich Strömungsmaschinen wie folgt klassifizieren:

  • Kraft erzeugend Maschinen:
  • Turbinen: Drehmoment und Leistung werden in der Welle als Ergebnis der Variation der Bewegungsmenge des durch sie hindurchströmenden Fluids bereitgestellt.
  • Windräder: die kinetische Energie des Windes wird in mechanische Energie umgewandelt.
  • Kraft verbrauchend Maschine:
  • Pumpen: der Flüssigkeit wird mechanische Energie in Form von Arbeit zugeführt, um den Druckabfall zu ersetzen, den die Flüssigkeiten aufgrund der Reibung in den Leitungen erleiden.
  • Ventilatoren: Durch den erzeugten Druckanstieg werden große Gasmengen bewegt. Es gibt zwei Grundtypen von Ventilatoren: den Gebläse oder Zentrifugal Ventilator und den Axialfluss Ventilator.
  • Kompressoren: im Vergleich zu den Ventilatoren wird ein geringerer Volumenstrom bewegt, aber der Druckanstieg ist viel höher.

Maschinen werden seit der Antike mit dem Ziel konstruiert, die von der Natur bereitgestellte Energie zu nutzen. So ist beispielsweise die Umwandlung von mechanischer Energie in hydraulische Energie durch Maschinen für die meisten Ingenieure und Techniker von großem Interesse. Einige klassische hydraulische Maschinen sind das römische Wasserrad oder die hydraulische Presse. Gegenwärtig sind wir in unserem täglichen Leben von Strömungsmaschinen umgeben. Einige Beispiele sind die Flugzeuge Triebwerke, der Kreislauf Pumpen in Schwimmbädern oder Autos, die Windmühlen, die Kühler Ventilatoren in Computern oder die zu Hause verwendeten Ventilatoren.

Siehe Produkte
FLÜSSIGKEITSMASCHINEN UNITS
1 - 30 von 36 Artikel(n)
SERIES/PARALLEL PUMPS BENCH - PBSPB
  • PBSPB
Available
8.7.1.- PUMPS
PBSPB
Werkbank für serien-/ parallelgeschaltete Pumpen.
The Series/Parallel Pumps Bench, "PBSPB", is designed to demonstrate the operational advantages of parallel or series operation, depending on the required duty.This unit consists of two centrifugal pumps, a feed water tank, circulation pipes,...
CENTRIFUGAL PUMP BENCH - PBCB
  • PBCB
Available
8.7.1.- PUMPS
PBCB
Werkbank für Zentrifugalpumpen.
The Centrifugal Pump Bench, "PBCB", is a bench-top unit consists of a centrifugal pump, a feed water tank, circulation pipes, regulation valves, as well as the enough control elements for the pump experiments: two manometer and a flow sensor.A...
COMPUTER CONTROLLED GEAR PUMP BENCH - PBEC
  • PBEC
Available
8.7.1.- PUMPS
PBEC
Werkbank für Getriebepumpen, computergesteuert.
The Computer Controlled Gear Pump Bench, "PBEC", is a bench-top unit consists of a gear pump computer controlled, a feed water tank, circulation pipes, regulation valves, as well as the enough control elements for the pump experiments: two...
COMPUTER CONTROLLED AXIAL PUMP BENCH - PBAC
  • PBAC
Available
8.7.1.- PUMPS
PBAC
Werkbank für Axialpumpen, computergesteuert.
The Computer Controlled Axial Pump Bench, "PBAC", is designed to study this type of pumps. It is a bench-top unit that consists of a computer controlled axial pump, a water tank and circulation pipes with a flow regulation valve. Besides, it...
COMPUTER CONTROLLED PISTON PUMP BENCH - PBRC
  • PBRC
Available
8.7.1.- PUMPS
PBRC
Werkbank für Kolbenpumpen, computergesteuert.
The Computer Controlled Piston Pump Bench, "PBRC", is a bench-top unit that consists of a piston pump, a feed tank, flow meter tank calibrated for taking flow measurements, circulation pipes, manual valves and a solenoid valve, computer...
COMPUTER CONTROLLED AXIAL FLOW TURBOMACHINES UNIT - HMFAC
  • HMFAC
Available
8.7.3.- TURBINEN
HMFAC
Computer Controlled Axial Flow Turbomachines Unit
The Computer Controlled Axial Flow Turbomachines Unit, "HMFAC", allows the study of single-stage axial turbomachines, with interchangeable vanes for the study of both a pump and a turbine.The main part of the unit is the axial turbomachine...
CENTRIFUGAL FAN TEACHING UNIT - HVCB
  • HVCB
Available
8.7.2.- FANS
HVCB
Lehrtrainer für Zentrifugalgebläse.
The Centrifugal Fan Teaching Unit, "HVCB", allows the students to study the operation characteristics of a centrifugal fan. For that purpose, the unit carries out the measurements of flow, speed, temperature and humidity. Multiple tests related to...
AXIAL FAN TEACHING UNIT - HVAB
  • HVAB
Available
8.7.2.- FANS
HVAB
Lehrtrainer für Axialgebläse.
The Axial Fan Teaching Unit, "HVAB", allows the observation, the study and the working process analysis of an axial-flow fan.The main element of this unit is a variable speed centrifugal fan, which is measured through a speed sensor, and a...
COMPUTER CONTROLLED PELTON TURBINE - TPC
  • TPC
Available
5.3.6.- HYDRAULISCHE ENERGIE
TPC
Pelton- Turbine, computergesteuert.
The Computer Controlled Pelton Turbine, "TPC", designed by EDIBON, consists of a small-scale Pelton turbine, with a valve that allows the flow to be regulated. The turbine includes a PELTON runner with 16 buckets, which can be clearly seen through...
COMPUTER CONTROLLED FRANCIS TURBINE - TFC
  • TFC
Available
5.3.6.- HYDRAULISCHE ENERGIE
TFC
Francis- Turbine, computergesteuert.
The Computer Controlled Francis Turbine, "TFC", consists of a small-scale Francis Turbine, with a valve that allows flow regulation and has a ring with adjustable guide vanes that allows control of the angle of incidence of the water in the...
COMPUTER CONTROLLED KAPLAN TURBINE - TKC
  • TKC
Available
5.3.6.- HYDRAULISCHE ENERGIE
TKC
Kaplan- Turbine, computergesteuert.
The Computer Controlled Kaplan Turbine, "TKC", consists of a small-scale Kaplan turbine that has a ring with adjustable guide vanes, which allow the control of water flow in the turbine.In order to raise the fluid, it has a computer controlled...
COMPUTER CONTROLLED RADIAL FLOW TURBINE - TFRC
  • TFRC
Available
5.3.6.- HYDRAULISCHE ENERGIE
TFRC
Radialturbine, computergesteuert.
The Computer Controlled Radial Flow Turbine, "TFRC", consists of a small-scale radial flow turbine with two nozzles at 90 degrees to the perpendicular direction of the axis of rotation.In order to raise the fluid, it has a computer controlled pump...
COMPUTER CONTROLLED AXIAL FLOW TURBINE - TFAC
  • TFAC
Available
5.3.6.- HYDRAULISCHE ENERGIE
TFAC
Axialturbine, computergesteuert.
The Computer Controlled Axial Flow Turbine, "TFAC", consists of a small-scale turbine with single-stage axial flow input. It has eight nozzles that act as water rings to the rotor, four of which have an incidence angle of 20º and the other four of...
COMPUTER CONTROLLED EXPERIMENTAL REACTION TURBINE - HTRC
  • HTRC
Available
5.3.6.- HYDRAULISCHE ENERGIE
HTRC
Experimentelle Überdruckturbine, computergesteuert.
The Experimental Reaction Turbine, Computer Controlled (PC), "HTRC", allows to study the characteristics of operation of a small scale reaction turbine.This unit includes suitable instrumentation to measure the main parameters:There is a pressure...
COMPUTER CONTROLLED EXPERIMENTAL IMPULSE TURBINE - HTIC
  • HTIC
Available
5.3.6.- HYDRAULISCHE ENERGIE
HTIC
Experimentelle Gleichdruckturbine, computergesteuert.
The Computer Controlled Experimental Impulse Turbine, "HTIC", allows to study the characteristics and the behavior of a small scale impulse turbine.This unit includes suitable instrumentation to measure the main parameters:There is a pressure...
COMPUTER CONTROLLED HYDRAULIC TURBINES MODULAR UNIT - HTMC
  • HTMC
Available
8.7.3.- TURBINEN
HTMC
Computer Controlled Hydraulic Turbines Modular Unit
Computer Controlled Modular Hydraulic Turbine Unit,"HTMC", has been designed by EDIBON for the study and comparison of different types of small scale hydraulic turbines, allowing the determine the operation characteristics of this type of turbine,...
FRANCIS TURBINE MODEL - HT-F
Available
8.7.3.- TURBINEN
HT-F
Modell einer Francis-Turbine
Zubehör von HTMC
Computer Controlled Modular Hydraulic Turbine Unit,"HTMC", has been designed by EDIBON for the study and comparison of different types of small scale hydraulic turbines, allowing the determine the operation characteristics of this type of turbine,...
AXIAL FLOW TURBINE MODEL - HT-FA
Available
8.7.3.- TURBINEN
HT-FA
Modell einer Axialturbine
Zubehör von HTMC
Computer Controlled Modular Hydraulic Turbine Unit,"HTMC", has been designed by EDIBON for the study and comparison of different types of small scale hydraulic turbines, allowing the determine the operation characteristics of this type of turbine,...
RADIAL FLOW TURBINE MODEL - HT-FR
Available
8.7.3.- TURBINEN
HT-FR
Modell einer Radialturbine
Zubehör von HTMC
Computer Controlled Modular Hydraulic Turbine Unit,"HTMC", has been designed by EDIBON for the study and comparison of different types of small scale hydraulic turbines, allowing the determine the operation characteristics of this type of turbine,...
KAPLAN TURBINE MODEL - HT-K
Available
8.7.3.- TURBINEN
HT-K
Modell einer Kaplan-Turbine
Zubehör von HTMC
Computer Controlled Modular Hydraulic Turbine Unit,"HTMC", has been designed by EDIBON for the study and comparison of different types of small scale hydraulic turbines, allowing the determine the operation characteristics of this type of turbine,...
PELTON TURBINE MODEL - HT-P
Available
8.7.3.- TURBINEN
HT-P
Modell einer Pelton-Turbine
Zubehör von HTMC
Computer Controlled Modular Hydraulic Turbine Unit,"HTMC", has been designed by EDIBON for the study and comparison of different types of small scale hydraulic turbines, allowing the determine the operation characteristics of this type of turbine,...
COMPUTER CONTROLLED WIND ENERGY UNIT - EEEC
  • EEEC
Available
5.3.3.- WINDENERGIE
EEEC
Gerät für Windenergie, computergesteuert.
The Computer Controlled Wind Energy Unit, "EEEC", contains an aerogenerator, in laboratory-scale, and is used to study the conversion of kinetic wind energy into electrical energy and to study the influence of some factors on this generation.The...
WIND ENERGY UNIT - EEE
  • EEE
Available
5.3.3.- WINDENERGIE
EEE
Gerät für Windenergie.
The Wind Energy Unit, "EEE", contains an aerogenerator, in laboratory-scale, and is used to study the conversion of kinetic wind energy into electrical energy and to study the influence of some factors on this generation.The unit consists of a...
Informationen anfordern