9.2.- HEIZUNG, BELÜFTUNG, KLIMAANLAGE UND HEISSES WASSER

Sicher Umweltbedingungen werden in vielen Lebenssituationen benötigt, zum Beispiel in einer industriellen Umgebung, einem Haus oder einem Gewächshaus. Je nach Anforderung können die Parameter LuftParameter mit Hilfe spezifischer Geräte modifiziert werden.

Mehr sehen

Unter normalen Bedingungen hat die Luft einen Massengehalt von etwa 23% Sauerstoff, 76% Stickstoff und 1% Gase und Dämpfe. Unter den Gasen und Dämpfen ist das wichtigste Wasserdampf. Obwohl sein Anteil sehr gering ist, ist er sehr wichtig für die Verdampfungsrate von nassen Oberflächen und Materialien.

Die Systeme Klimatisierung und Lüftung modifizieren die Luft Feuchtigkeit und andere Parameter wie Temperatur und Druck.

Wenn die Luftparameter modifiziert werden, werden Wasserheizsysteme verwendet, um spezifische Bedingungen zu erhalten.

Im Alltag kann Wasser für Sanitär- Zwecke (Badezimmer, Duschen) und für andere Reinigungszwecke oder für Heizung erwärmt werden. Je nach späterer Verwendung wird das Wasser mit einem Heizsystem aufbereitet.

  • Sanitär Wasser kann auf zwei Arten aufbereitet werden:
  • Durch Speicherung: Warmwasser wird in einem Tank für die vorgesehenen Verwendungszwecke gespeichert.
  • Durch Augenblickliche Erwärmung: Wasser fließt durch eine Rohrschlange, die direkt von einer Flamme oder einem Wärmetauscher erwärmt wird.
  • A Heizung System erhöht oder hält die Lufttemperatur. Es besteht aus drei Teilen:
  • Ein Wärmeerzeugung System: es kann ein Brennstoffkessel, ein mit Heizelementen betriebenes System oder ein anderes System sein.
  • A Verteilung System: Rohre, durch die warmes Wasser oder Luft strömt.
  • Ein Emissions- System: Heizkörper, Gitter, spezifische Versorgungselemente.

Alle Methoden der Wassererwärmung, unabhängig von der Nutzung, müssen bewertet werden, da die Energieeffizienz Variabilität sehr groß ist.

Siehe Produkte
HEIZUNG, BELÜFTUNG, KLIMAANLAGE UND HEISSES WASSER UNITS
1 - 24 von 24 Artikel(n)
COMPUTER CONTROLLED BIOMASS PROCESS UNIT - EBMC
  • EBMC
Available
5.3.7.- BIOKRAFTSTOFFE
EBMC
Biomasseprozessgerät, computergesteuert.
The main element of the unit is the biomass boiler, which will heat the water that will flow through the other components transferring its heat.The boiler is a biomass boiler of 16 kW that works with pellet and other granulated fuels. The body of...
BIOMASS PROCESS UNIT - EBMB
  • EBMB
Available
5.3.7.- BIOKRAFTSTOFFE
EBMB
Biomass Process Unit
The main element of the unit is the biomass boiler, which will heat the water that will flow through the other components transferring its heat.The boiler is a biomass boiler of 16 kW that works with pellet and other granulated fuels. The body of...
WATER HEATERS TRAINING UNIT - WHT
  • WHT
Available
9.2.- HEIZUNG, BELÜFTUNG, KLIMAANLAGE UND HEISSES WASSER
WHT
Water Heaters Training Unit
The Water Heater Training Unit, "WHT", allows demonstrating the operation of three types of water heaters. The unit has three heaters, two of them commercial one with electronic ignition and one in millivolt, and a residential gas heater without...
UNDERFLOOR HEATING AND/OR HEAT SOURCE FOR HEAT PUMP - UHHS
  • UHHS
Available
9.3.- WÄRMEPUMPEN
UHHS
Underfloor Heating and/or Heat Source for Heat Pump
The Underfloor Heating and/or Heat Source for Heat Pump, "UHHS", designed by EDIBON, allows the visualization of a piping system that simulates a radiant floor heating system and its functions as a heat sink. It can also be used as a heat source...
FAN HEATER AND/OR AIR HEAT EXCHANGER - FHAH
  • FHAH
Available
9.3.- WÄRMEPUMPEN
FHAH
Fan Heater and/or Air Heat Exchanger
The unit Fan Heater and/or Air Heat Exchanger, "FHAH", designed by EDIBON, allows the visualization of a fan heater and its functions as a heat sink. It can also be used as a heat source working in conjunction with a heat pump.The main component...
COMPUTER CONTROLLED AIR CONDITIONING LABORATORY UNIT - TAAC
  • TAAC
Available
9.2.- HEIZUNG, BELÜFTUNG, KLIMAANLAGE UND HEISSES WASSER
TAAC
Klimaanlagengerät für das Labor, computergesteuert.
The Computer Controlled Air Conditioning Laboratory Unit, "TAAC", has been designed to study the change of the air conditions and the refrigeration circuit.The unit consists of a testing tunnel made of stainless steel, in which there have...
AIR CONDITIONING LABORATORY UNIT - TAAB
  • TAAB
Available
9.2.- HEIZUNG, BELÜFTUNG, KLIMAANLAGE UND HEISSES WASSER
TAAB
Klimaanlagengerät für das Labor
The Air Conditioning Laboratory Unit, "TAAB", has been designed to study the change of the air conditions and the refrigeration circuit. The unit consists of a testing tunnel made in stainless steel, in which there have installed two windows....
COMPUTER CONTROLLED RECIRCULATING AIR CONDITIONING UNIT - TARC
  • TARC
Available
9.2.- HEIZUNG, BELÜFTUNG, KLIMAANLAGE UND HEISSES WASSER
TARC
Klimaanlagengerät (Umluft), computergesteuert.
The Computer Controlled Recirculating Air Conditioning Unit, "TARC", has been designed to study both the changes in the air conditions and the refrigeration circuit. For that purpose, temperature sensors, pressure sensors and flow meters have been...
RECIRCULATING AIR CONDITIONING UNIT - TARB
  • TARB
Available
9.2.- HEIZUNG, BELÜFTUNG, KLIMAANLAGE UND HEISSES WASSER
TARB
Klimaanlagengerät (Umluft).
The Recirculating Air Conditioning Unit, "TARB", has been designed to study both the changes in the air conditions and the refrigeration circuit. For that purpose, temperature sensors, pressure meters and flow meters have been strategically...
COMPUTER CONTROLLED AUTOMOBILE AIR CONDITIONING UNIT - TAAUC
  • TAAUC
Available
9.2.- HEIZUNG, BELÜFTUNG, KLIMAANLAGE UND HEISSES WASSER
TAAUC
Klimaanlagentrainer für Automobile, computergesteuert.
The Computer Controlled Automobile Air Conditioning Trainer, "TAAUC", consists, basically, of a compressor driven through a belt by a motor that simulates the engine of a car.The number of revolutions of the engine and, therefore, the compressor,...
AUTOMOBILE AIR CONDITIONING UNIT - TAAU
  • TAAU
Available
9.2.- HEIZUNG, BELÜFTUNG, KLIMAANLAGE UND HEISSES WASSER
TAAU
Klimaanlagen für Kraftfahrzeuge
The Automobile Air Conditioning Unit, "TAAU", consists, basically, of a compressor driven through a belt by a motor that simulates the engine of a car. The number of revolutions of the engine and, therefore, the compressor, can be adjusted with a...
COMPUTER CONTROLLED AIR DUCT SYSTEMS UNIT - TSCAC
  • TSCAC
Available
9.2.- HEIZUNG, BELÜFTUNG, KLIMAANLAGE UND HEISSES WASSER
TSCAC
Computer Controlled Air Duct Systems Unit
With the Computer Controlled Air Duct Systems Unit, "TSCAC", the user will study the air distribution under different configurations thanks to the supports included with the unit. The user himself will assemble the air ducts using usual elements...
SPLIT AIR CONDITIONER UNIT - TACS
  • TACS
Available
9.2.- HEIZUNG, BELÜFTUNG, KLIMAANLAGE UND HEISSES WASSER
TACS
Split Air Conditioner Unit
The Split Air Conditioner Unit, "TACS", designed by EDIBON allows the study of the operation of a split system air conditioner with heat pump function to heat or cool, apart from other operation modes available.The main element of the Split Air...
AIR HUMIDITY MEASUREMENT UNIT - TMHA
  • TMHA
Available
9.2.- HEIZUNG, BELÜFTUNG, KLIMAANLAGE UND HEISSES WASSER
TMHA
Messgerät für die Luftfeuchtigkeit.
The Air Humidity Measurement Unit, "TMHA", enables the differences in accuracy between different instruments to measure the air relative humidity. It also includes a fan to show the effects of airflow on the different instruments. A mobile...
HYDRAULIC RADIATOR BALANCING TRAINING UNIT - THBT
  • THBT
Available
9.10.3.- INSTALLATIONS- UND WARTUNGSPRAXIS
THBT
Hydraulic Radiator Balancing Training Unit
The Hydraulic Radiator Balancing Training Unit, "THBT", allows the study of the amount of water with which to guarantee that all the radiators of an installation are supplied with sufficient hot water.The hydraulic balancing is carried out by...
HEATING SYSTEM TRAINING UNIT - THST
  • THST
Available
9.10.3.- INSTALLATIONS- UND WARTUNGSPRAXIS
THST
Heating System Training Unit
The Heating System Training Unit, "THST", has been designed to study central heating systems. The unit simulates a central heating system. For that purpose, it is made up of four radiators with a thermostatic valve each. This valve controls the...
CIRCULATING PUMPS TRAINING UNIT - TCPT
  • TCPT
Available
9.10.3.- INSTALLATIONS- UND WARTUNGSPRAXIS
TCPT
Circulating Pumps Training Unit
The Circulation Pumps Training Unit, "TCPT", is a unit of experimentation of sanitary and heating techniques that allows studying the operation of circulating pumps, both connected in series and in parallel. It consists of a pipe circuit with two...
EXPANSION VESSEL TRAINING UNIT - TEVT
  • TEVT
Available
9.10.3.- INSTALLATIONS- UND WARTUNGSPRAXIS
TEVT
Expansion Vessel Training Unit
The Expansion Vessel Training Unit, "TEVT", is a test unit for sanitary and heating techniques that allows studying the operation of an expansion vessel. It also allows studying the pressure – volume characteristic curve of it. The aim element of...
PRESSURE VESSEL AND SAFETY FEATURES TRAINING UNIT - TPVST
  • TPVST
Available
9.10.3.- INSTALLATIONS- UND WARTUNGSPRAXIS
TPVST
Pressure Vessel and Safety Features Training Unit
The Pressure Vessel and Safety Features Training Unit, "TPVST", is an experimentation of sanitary and heating techniques unit that allows studying the safety elements of a heating system with a pressure tank. It consists of a circuit of pipes for...
Informationen anfordern