8.9.- INSTALLATIONEN UND WARTUNG

Die Bedürfnisse der heutigen Gesellschaft sind eine Herausforderung für jede Industrie, da sie sich in ständiger Entwicklung und Erneuerung befinden müssen, um sich an diese Bedürfnisse anzupassen.

Mehr sehen

In den letzten Jahren, als Folge der neuen industriellen Revolution oder Industrie 4. 0, dem Aufkommen des Industriellen Internet der Dinge (IIoT) und der Smart Factories, dass die Anpassung dank der Anwendung der ausgeklügeltsten Techniken bei der Konzeption neuer Einrichtungen oder bei der Renovierung bestehender Einrichtungen möglich ist.

Trotz all dieser technologischen Fortschritte und der durchgeführten erschöpfenden Kontrollen darf nicht vergessen werden, dass jedes Element, das am Produktionsprozess beteiligt ist, einer mechanischen und elektrischen Abnutzung (Anstrengungen, Belastungen, etc.) ausgesetzt ist und seine Nutzungsdauer begrenzt ist. Um katastrophale Ausfälle, Produktionsunterbrechungen oder jede Art von Prozess zu vermeiden, die eine Erhöhung der unproduktiven Zeiten und somit eine Kostensteigerung impliziert, ist es äusserst wichtig, eine gute Wartung von Maschinen, elektrischen Systemen, usw.

Traditionell wurden nur zwei Typen von Wartung berücksichtigt:/div>

  • Korrigierend: der Fehler wird gelöst, wenn er bereits aufgetreten ist.
  • Präventiv: periodische Überprüfung all dieser problematischen Elemente und bei Bedarf deren Ersatz.

Diese Arten der Instandhaltung sind in den meisten Fällen mit sehr hohen und unnötigen Kosten verbunden. Heutzutage ist es dank der verfügbaren Technologie möglich, eine vorhersagekräftige Wartung durchzuführen, die aus einer umfassenden Analyse aller Variablen besteht, die an allen Komponenten eines Systems beteiligt sind, und die in der Lage sind, diese zum richtigen Zeitpunkt zu ersetzen.

Wenn man jedoch eine bessere Kontrolle über die Ausfälle bevorzugt, unter denen alle mechanischen Komponenten leiden können, die einem Verschleiß unterliegen, gibt es eine andere Art der Wartung, die als proaktive Wartung bekannt ist. Sie geht einen Schritt weiter als die vorausschauende Wartung und sucht nach der Wurzel des Problems.

Siehe Produkte
INSTALLATIONEN UND WARTUNG UNITS
1 - 30 von 32 Artikel(n)
UNIT TO STUDY AN ANGULAR NEEDLE VALVE CUTAWAY MODEL - ANVCM
  • ANVCM
Available
8.9.1.- ABSCHNITTLICHE MODELLE
ANVCM

Unit to Study an Angular Needle Valve Cutaway Model

The Unit to Study an Angular Needle Valve Cutaway Model, "ANVCM", allows the students to visualize the inner parts of a valve, to evaluate the relation with each other accurately and to understand their function.It is a device with mobile features...
UNIT TO STUDY A BALL VALVE CUTAWAY MODEL - BVCM
  • BVCM
Available
8.9.1.- ABSCHNITTLICHE MODELLE
BVCM

Unit to Study a Ball Valve Cutaway Model

The Unit to Study a Ball Valve Cutaway Model, "BVCM", allows the students to visualize the inner parts of a ball valve, to evaluate the relation with each other accurately and to understand their function.It is a device with mobile features that...
UNIT TO STUDY A LIFT NON-RETURN VALVE CUTAWAY MODEL - LNVCM
  • LNVCM
Available
8.9.1.- ABSCHNITTLICHE MODELLE
LNVCM

Unit to Study a Lift Non-return Valve Cutaway Model

The Unit to Study a Lift Non-Return Valve Cutaway Model, "LNVCM", allows the students to visualize the inner parts of a needle valve, to evaluate the relation with each other accurately and to understand their function.It is a device with mobile...
UNIT TO STUDY A PIPE MESH FILTER CUTAWAY MODEL - PMFCM
  • PMFCM
Available
8.9.1.- ABSCHNITTLICHE MODELLE
PMFCM

Unit to Study a Pipe Mesh Filter Cutaway Model

The Unit to Study a Pipe Mesh Filter Cutaway Model, "PMFCM", allows the students to visualize the inner parts of a mesh filter, to evaluate the relation with each other accurately and to understand their function.The cutaway model of a mesh filter...
UNIT TO STUDY A WATER METER CUTAWAY MODEL - WMCM
  • WMCM
Available
8.9.1.- ABSCHNITTLICHE MODELLE
WMCM

Unit to Study a Water Meter Cutaway Model

The Unit to Study a Water Meter Cutaway Model, "WMCM", allows the students to visualize the inner parts of a water meter, to evaluate the relation with each other accurately and to understand their function.It is a model of a device that measures,...
UNIT TO STUDY AN UNDERGROUND HYDRANT CUTAWAY MODEL - UHCM
  • UHCM
Available
8.9.1.- ABSCHNITTLICHE MODELLE
UHCM

Unit to Study an Underground Hydrant Cutaway Model

The Unit to Study an Underground Hydrant Cutaway Model, "UHCM", allows the students to visualize the inner parts of a hydrant, to evaluate the relation with each other accurately and to understand their function.The cutaway model of a hydrant is...
  • CPCM
Available
8.9.1.- ABSCHNITTLICHE MODELLE
CPCM

Centrifugal Pump Cutaway Model Unit

The Centrifugal Pump Cutaway Model Unit, "CPCM", allows the students to visualize the inner parts of a centrifugal pump, to evaluate the relation with each other accurately and to understand their function.The cutaway model of centrifugal pump is...
  • GPCM
Available
8.9.1.- ABSCHNITTLICHE MODELLE
GPCM

Gear Pump Cutaway Model Unit

The Gear Pump Cutaway Model Unit, "GPCM", allows the students to visualize the inner parts of a gear pump, to evaluate the relation with each other accurately and to understand their function.The cutaway model of gear pump is composed of real...
  • PPCM
Available
8.9.1.- ABSCHNITTLICHE MODELLE
PPCM

Piston Pump Cutaway Model Unit

The Piston Pump Cutaway Model Unit, "PPCM", allows the students to visualize the inner parts of a piston pump, to evaluate the relation with each other accurately and to understand their function.The cutaway model of piston pump is composed of...
ASSEMBLY OF A SHUT-OFF VALVE UNIT - ASV
  • ASV
Available
8.9.2.- ABNEHMBARE MODELLE
ASV

Assembly of a Shut-Off Valve Unit

The Assembly of a Shut-Off Valve Unit, "ASV", is a globe valve with bellows supplied in a carrying case that also includes a manual with two-dimensional plans, drawing of individual parts and drawing of the whole unit, the main parts list and the...
ASSEMBLY OF A MOTORIZED CONTROL VALVE UNIT - AMCV
  • AMCV
Available
8.9.2.- ABNEHMBARE MODELLE
AMCV

Assembly of a Motorized Control Valve Unit

The Assembly of a Motorized Control Valve Unit, "AMCV" is a ball motorized control valve with bellows supplied in a carrying case that also includes a manual with two-dimensional plans, drawing of individual parts and drawing of the whole unit,...
ASSEMBLY OF A CONTROL PNEUMATIC VALVE UNIT - ACPV
  • ACPV
Available
8.9.2.- ABNEHMBARE MODELLE
ACPV

Assembly of a Control Pneumatic Valve Unit

The Assembly of a Control Pneumatic Valve Unit, "ACPV", is a globe valve with bellows supplied in a carrying case that also includes a manual with two-dimensional plans, drawing of individual parts and drawing of the whole unit, the main parts...
ASSEMBLY AND MAINTENANCE OF PUMPS - AMP
  • AMP
Available
8.9.2.- ABNEHMBARE MODELLE
AMP

Assembly and Maintenance of Pumps

The different sets for the assembly and maintenance of pumps have all the parts in a case for an easy transport, facilitating the clearidentification of all the components and allowing the systematic assembly and disassembly, maintenance and...
ASSEMBLY AND MAINTENANCE OF A CENTRIFUGAL PUMP UNIT - AMCP
  • Zubehör von AMP
Available
8.9.2.- ABNEHMBARE MODELLE
AMCP

Assembly and Maintenance of a Centrifugal Pump Unit

Zubehör von AMP
The centrifugal pumps belong to the group of rotodynamic pumps, where the fluid is boosted thanks to the acceleration acquired whenpassing through the operating impeller. This acceleration, which starts from the center of the impeller and goes to...
ASSEMBLY AND MAINTENANCE OF A SCREW PUMP UNIT - AMSP
  • Zubehör von AMP
Available
8.9.2.- ABNEHMBARE MODELLE
AMSP

Assembly and Maintenance of a Screw Pump Unit

Zubehör von AMP
The screw pumps belong to the group of positive displacement pumps, which use aneccentric helical screw (rotor) that moves inside a sleeve (stator), making the liquid flowbetween the screw and the sleeve. The most important applications of this...
ASSEMBLY AND MAINTENANCE OF A DIAPHRAGM PUMP UNIT - AMDP
  • Zubehör von AMP
Available
8.9.2.- ABNEHMBARE MODELLE
AMDP

Assembly and Maintenance of a Diaphragm Pump Unit

Zubehör von AMP
Membrane pumps or diaphragm pumps belong to the group of positive displacement pumps, where the pressure increase is obtained by pushing elastic walls, known as, membranes or diaphragms, which change the volume of the chamber. Retention valves,...
ASSEMBLY AND MAINTENANCE OF A PISTON PUMP UNIT - AMPP
  • Zubehör von AMP
Available
8.9.2.- ABNEHMBARE MODELLE
AMPP

Assembly and Maintenance of a Piston Pump Unit

Zubehör von AMP
The piston pumps belong to the group of positive displacement pumps, where there are one or several fixed cavities whose volume can be changed due to the effect of a piston. The movement of the fluid is discontinuous and the charge and discharge...
ASSEMBLY AND MAINTENANCE OF A GEAR PUMP UNIT - AMGP
  • Zubehör von AMP
Available
8.9.2.- ABNEHMBARE MODELLE
AMGP

Assembly and Maintenance of a Gear Pump Unit

Zubehör von AMP
The gear pumps belong to the group of positive displacement, rotary piston pumps, which produce flow by transporting the fluid betweenthe teeth of two coupled gears. One of them is driven by the shaft of the pump (driving shaft), which turns the...
PIPES, VALVES AND FITTINGS ASSEMBLY UNIT - PVFA
  • PVFA
Available
8.9.3.- INSTALLATIONS- UND WARTUNGSPRAXIS
PVFA

Pipes, Valves and Fittings Assembly Unit

The Pipes, Valves and Fittings Assembly Unit, "PVFA", designed by EDIBON, consists of a solid and rigid U-shaped frame where a series ofreal pipes and fittings are mounted to form a complete hydraulic system.A filter, a sight glass and a pressure...
BACKFLOW PREVENTION TRAINING UNIT - BFPT
  • BFPT
Available
8.9.3.- INSTALLATIONS- UND WARTUNGSPRAXIS
BFPT

Backflow Prevention Training Unit

The Backflow Prevention Training Unit, "BFPT", allows verifying the operation of multiple non-return devices. The system contains the most common backflow prevention devices used in the industry. The main objective is to recognize each element...
THREE-WAY MIXING VALVE TRAINING UNIT - TEV3V
  • TEV3V
Available
9.10.3.- INSTALLATIONS- UND WARTUNGSPRAXIS
TEV3V

Three-Way Mixing Valve Training Unit

The Three-Way Mixing Valve Training Unit, "TEV3V", allows to demonstrate the function of a three-way mixing valve in a hot water heating system. The three-way mixing valve in the heating system regulates the supply water temperature to a heating...
FOUR-WAY MIXING VALVE TRAINING UNIT - TEV4V
  • TEV4V
Available
9.10.3.- INSTALLATIONS- UND WARTUNGSPRAXIS
TEV4V

Four-Way Mixing Valve Training Unit

The Four-Way Mixing Valve Training Unit, "TEV4V", allows to demonstrate the function of a four-way mixing valve in a hot water heating system. The four-way mixing valve in the heating system regulates the circulation and feed flow temperatures of...
SANITARY FITTINGS TRAINING UNIT - TEIS
  • TEIS
Available
9.10.3.- INSTALLATIONS- UND WARTUNGSPRAXIS
TEIS

Sanitary Fittings Training Unit

The Sanitary Fittings Training Unit, "TEIS", has been designed by EDIBON for training in the plumbing sector. It consists of an anodized aluminum frame and panels in painted steel in which tests can be carried out with the most common systems of...
DRINKING WATER INSTALLATION UNIT - TIAP
  • TIAP
Available
9.10.3.- INSTALLATIONS- UND WARTUNGSPRAXIS
TIAP

Drinking Water Installation Unit

The Drinking Water Installation Unit, "TIAP", has been designed to demonstrate domestic water heating from the cold water supply. A typical domestic drinking water system is attached to the front panel of the unit. The unit includes the most...
PROTECTION OF DRINKING WATER TRAINING UNIT - TPAP
  • TPAP
Available
9.10.3.- INSTALLATIONS- UND WARTUNGSPRAXIS
TPAP

Protection of Drinking Water Training Unit

The Protection of Drinking Water Training Unit, "TPAP", has been designed by EDIBON to study cases in which the drinking water system is contaminated with wastewater. It is specially designed for the training of students in the plumbing sector.The...
PIPE CLEANING TRAINING UNIT - TELT
  • TELT
Available
9.10.3.- INSTALLATIONS- UND WARTUNGSPRAXIS
TELT

Pipe Cleaning Training Unit

The Pipe Cleaning Training Unit, "TELT", designed by EDIBON, simulates a real house piping system, so original components used in plumbing systems are employed.The objective of this unit is to study the cleaning of pipes from the sanitation...
Informationen anfordern