销售冠军
Showing 217-252 of 921 item(s)
12 24 36
TEMPERATURE MEASUREMENT UNIT - TMT
  • TMT
Available
9.1.- 热力学的基本原理和基本概念
TMT
Temperature Measurement Unit
The Temperature Measurement Unit, "TMT", works as a temperature meter that uses different temperatures measuring devices to compare, check and analyze the temperature and how is the precision for the measure and for the device that the student has...
查看单位
TENSILE TESTER UNIT - MTTU
  • MTTU
Available
7.3.2.1.- 机械测试
MTTU
Tensile Tester Unit
With the Tensile Tester Unit, "MTTU", designed by EDIBON, tensile test can be performed. A specimen made of different materials is subjected to an increasing axial tensile stress till failure. This unit allows the user to perform tensile tests...
查看单位
THICK WALLED CYLINDER UNIT - MCPG
  • MCPG
Available
7.1.6.- 结构力学
MCPG
Thick Walled Cylinder Unit
In the Thick-Walled Cylinder Unit, "MCPG", designed by EDIBON, the stresses are determined through the measurement of the strains produced on the surface. These strains are measured by strain gauges.The thick-walled vessel consists of an aluminum...
查看单位
THIN CYLINDER UNIT - MCD
  • MCD
Available
7.1.5.- 摩擦学 (摩擦, 磨损, 润滑)
MCD
Thin Cylinder Unit
The Thin Cylinder Unit, "MCD", has been developed to enable the student to verify various analytical formulae with actual measured results. Strain gauges mounted in various positions and orientations on the cylinder provide an opportunity for...
查看单位
TORSION TEST UNIT (30NM) - MTT
  • MTT
Available
7.3.2.1.- 机械测试
MTT
Torsion Test Unit (30Nm)
To perform the tests, the test specimen is clamped and twisted by means of a flywheel and a worm gear until it breaks. The force is gradually applied to the specimen to observe the elastic strain produced. The specimen will deform and manifest...
查看单位
TRANSMISSIONS EXPERIMENTS - MECA3
Available
7.1.1.- 机械基础套件
MECA3
Transmissions Experiments
配件 LIMEBA
Most recent machines require the transmission of motion between elements to obtain the desired mechanical result. The mechanisms studied in this module are those that transmit motion between two axles.
查看单位
TRIBOLOGY MODULAR UNIT - MEMT
  • MEMT
Available
7.1.5.- 摩擦学 (摩擦, 磨损, 润滑)
MEMT
Tribology Modular Unit
The Tribology Modular Unit, "MEMT", designed by EDIBON, consists of a base unit with electronic console and a series of experimental units to investigate and visualize tribological phenomena.MEMT-UB. Drive Unit for Tribological Tests. This unit is...
查看单位
METACENTRIC HEIGHT DEMOSTRATION OF A "U" SHAPED FLOATING BODY - FME11-B
  • FME11-B
Available
8.1.3.- 静水的
FME11-B
U 形漂浮物的元心高度演示
The Metacentric Height Demostration of a "U" Shaped Floating Object, "FME11-B", designed by EDIBON, allows the study of the stability of a floating object by calculating its metacentric height starting from a U-shaped floating body.The unit...
查看单位
UNIT FOR STUDYING BEARING FRICTION - MBF
  • MBF
Available
7.1.5.- 摩擦学 (摩擦, 磨损, 润滑)
MBF
Unit for Studying Bearing Friction
The Unit for Studying Bearing Friction, "MBF", has been designed by EDIBON to study sliding friction in slide bearings and rolling bearings. Since rolling friction is very little, rotational dynamics basic tests can be performed with the inertia...
查看单位
UNIT FOR STUDYING FORCES IN A JIB CRANE - MFPG
  • MFPG
Available
7.1.6.- 结构力学
MFPG
Unit for studying Forces in a Jib Crane
The Unit for studying Forces in a Jib Crane, "MFPG", is designed to study the tensile and compressive forces in a planar central force system based on the example of a crane jib.The unit represents a planar central force system in which multiple...
查看单位
UNIT FOR STUDYING FORCES IN A SIMPLE BAR STRUCTURE - MFBS
  • MFBS
Available
7.1.6.- 结构力学
MFBS
Unit for studying Forces in a Simple Bar Structure
The Unit for Studying Forces in a Simple Bar Structure, "MFBS", designed by EDIBON allows the study of forces acting on a simple truss when is subjected to a point load in one of the nodes that make up the structure.It consists of a group of five...
查看单位
UNIT TO STUDY A CONTROL GEAR CUTAWAY MODEL - CGCM
Available
7.4.1.- 分段模型
CGCM
Unit to Study a Control Gear Cutaway Model
配件 CMTM
The Unit to Study a Control Gear Cutaway Model provides an in-depth analysis of these gears, which are designed to adjust the spacing between teeth, ensuring precise control in various mechanical applications.These gears are essential in precision...
查看单位
UNIT TO STUDY A MITRE GEAR CUTAWAY MODEL - MGCM
Available
7.4.1.- 分段模型
MGCM
Unit to Study a Mitre Gear Cutaway Model
配件 CMTM
The Unit to Study a Mitre Gear Cutaway Model provides a detailed study of this transmission system, composed of two conical cogwheels, designed to transmit motion between two intersecting shafts, usually positioned at a right angle.Due to their...
查看单位
UNIT TO STUDY A MULTIPLE-DISC CLUTCH CUTAWAY MODEL - DCCM
Available
7.4.1.- 分段模型
DCCM
Unit to Study a Multiple-Disc Clutch Cutaway Model
配件 CMTM
The Unit to Study a Multiple-Disc Clutch Cutaway Model provides insight into the operation of this clutch system, which uses multiple friction discs to increase torque transmission capacity.This type of clutch is widely used in chain tractor...
查看单位
UNIT TO STUDY A PLANETARY GEAR CUTAWAY MODEL - PGCM
Available
7.4.1.- 分段模型
PGCM
Unit to Study a Planetary Gear Cutaway Model
配件 CMTM
The Unit to Study a Planetary Gear Cutaway Model provides an in-depth analysis of this type of transmission, which consists of one or more external (planet) gears rotating around a central (sun) gear.Planetary gears are widely used in vehicle...
查看单位
UNIT TO STUDY A SPUR GEAR CUTAWAY MODEL - SGCM
Available
7.4.1.- 分段模型
SGCM
Unit to Study a Spur Gear Cutaway Model
配件 CMTM
The Unit to Study a Spur Gear Cutaway Model provides insight into the operation of this transmission system, characterized by teeth parallel to the axis of rotation, allowing for direct power transmission with high efficiency.This type of gear is...
查看单位
UNIT TO STUDY A TWO-STAGE SPUR GEAR CUTAWAY MODEL - SGCM/2
Available
7.4.1.- 分段模型
SGCM/2
Unit to Study a Two-Stage Spur Gear Cutaway Model
配件 CMTM
The Unit to Study a Two-Stage Spur Gear Cutaway Model provides an in-depth analysis of these systems, which utilize two pairs of spur gears in series to achieve greater speed reduction and more efficient torque transmission.These systems are...
查看单位
UNIT TO STUDY A WORM GEAR CUTAWAY MODEL - WGCM
Available
7.4.1.- 分段模型
WGCM
Unit to Study a Worm Gear Cutaway Model
配件 CMTM
The Unit to Study a Worm Gear Cutaway Model provides insight into the operation of this transmission system, consisting of a helical worm screw and a circular cogwheel.This type of transmission is widely used in automatic doors, elevators, and...
查看单位
UNIT TO STUDY ROTATIONAL INERTIA - SRI
  • SRI
Available
7.1.3.- 静态和动态
SRI
Unit to Study Rotational Inertia
The Unit to Study Rotational Inertia, "SRI", has been designed to carry out tests to analyze the moments of inertia of a solid and a hollow cylinder, both with same mass and diameter. The moment of inertia of another hollow cylinder with different...
查看单位
UNIVERSAL BUCKLING UNIT - MUP
  • MUP
Available
7.3.2.1.- 机械测试
MUP
Universal Buckling Unit
The Universal Buckling Unit "MUP" is a bench-top unit whose frame is made of anodized aluminum profiles and plates and steel elements, on which a bubble level is installed to equilibrate the system.The unit has been designed to carry out tests...
查看单位
U-SHAPE MANOMETER - HMM-U1000
Available
8.2.- 度量衡
HMM-U1000
U型压力计
配件 HMM
The U-Shape Manometer, "HMM-U1000," designed by EDIBON, allows the study of various pressures and their relationship with the fluid. It measures the difference in liquid level in its columns, providing vital information for pressure analysis in...
查看单位
METACENTRIC HEIGHT DEMOSTRATION OF A "V" SHAPED FLOATING BODY - FME11-A
  • FME11-A
Available
8.1.3.- 静水的
FME11-A
V "型浮动物体的元心高度演示
The Metacentric Height Demostration of a "V" Shaped Floating Object, "FME11-A", designed by EDIBON, allows the study of the stability of a floating object by calculating the metacentric height of a floating object starting from a V-shaped floating...
查看单位
VIBRATION OF COIL SPRING UNIT - MVRE
  • MVRE
Available
7.1.4.- 振动和振荡
MVRE
Vibration of Coil Spring Unit
The Vibration of Coil Spring Unit, "MVRE", has been designed by EDIBON to study and understand a coil torsion spring, a mass-spring system and the fundamental properties of its characteristic periodic motion.In this sense, the unit consists of a...
查看单位
WATER HEATERS TRAINING UNIT - WHT
  • WHT
Available
9.2.- 加热, 通风, 空调和热水
WHT
Water Heaters Training Unit
The Water Heater Training Unit, "WHT", allows demonstrating the operation of three types of water heaters. The unit has three heaters, two of them commercial one with electronic ignition and one in millivolt, and a residential gas heater without...
查看单位
WHEEL AND DIFFERENTIAL AXLE UNIT - MRYE2
  • MRYE2
Available
7.1.3.- 静态和动态
MRYE2
Wheel and Differential Axle Unit
The Wheel and Differential Axle Unit, "MRYE2", has been designed by EDIBON to investigate the mechanics of a wheel and differential axle mechanism and demonstrating the force reduction on a differential pulley block.A wheel, consisting of a pulley...
查看单位
WORM AND WHEEL UNIT - MTSF
  • MTSF
Available
14.1.2.2.- 齿轮
MTSF
Worm and Wheel Unit
The Worm and Wheel Unit, "MTSF", designed by EDIBON, allows to demonstrate the principle of a worm gear.The unit consists in a worm and a wheel. These parts are mounted on ball bearings and fixed to a vertical panel.The worm and wheel are...
查看单位
HOOKE'S JOINT MECHANISM - MUN
  • MUN
Available
7.1.2.1.- 机制
MUN
万向节机构
The Hooke’s Joint Mechanism, "MUN", designed by EDIBON, represents a universal coupling, also called a U-joint, Hooke joint or cardan joint. The Hooke joint is a universal mechanism that is often used to transmit rotary motion between two...
查看单位
AC THREE-PHASE INDUCTION MOTORS APPLICATION - AEL-ACEM
  • AEL-ACEM
Available
4.3.2.1.- 交流电动机和发电机
AEL-ACEM
三相交流感应电动机应用
This AC Three-Phase Induction Motors Application, "AEL-ACEM", consists of a base equipment which is formed by several modules such as power supplies, push buttons, three-phase autotransformer, A.C. ammeter, circuit breakers, timers, flywheel, etc....
查看单位
AC THREE-PHASE RELUCTANCE MOTORS APPLICATION - AEL-ACRL
  • AEL-ACRL
Available
4.3.2.1.- 交流电动机和发电机
AEL-ACRL
三相交流磁阻电机应用
The AC Three-Phase Reluctance Motors Application, "AEL-ACRL", has been designed is to study the storage of the working principle and the main industrial operations fulfilled with three-phase reluctance motors.The "AEL-ACRL" allows the user to...
查看单位
ANALYSIS OF THREE-PHASE POWER LINES APPLICATION - AEL-TI-01
  • AEL-TI-01
Available
5.1.3.2.- 电力传输
AEL-TI-01
三相功率线路分析应用
The Analysis of Three-phase Power Lines Application, "AEL-TI-01", includes a series of modules which allow the study of the most important characteristics of aerial lines.Among them we can find: the aerial line module, which is configurable with...
查看单位
THREE-PHASE TRANSFORMER APPLICATION - AEL-TPTT
  • AEL-TPTT
Available
4.3.1.- 变压器应用
AEL-TPTT
三相变压器应用
The Three-Phase Transformer Application, "AEL-TPTT", has been designed by EDIBON to allow the students learn how to carry out different three-phase transformer tests and how they work.With this application the user will study the basic operating...
查看单位
FAULT SIMULATION APPLICATION IN THREE PHASE TRANSFORMERS - AEL-ESAT
  • AEL-ESAT
Available
4.3.1.- 变压器应用
AEL-ESAT
三相变压器故障模拟应用
The Fault Simulation Application in Three Phase Transformers, "AEL-ESAT", has been designed by EDIBON to simulate non-destructive faults in three-phase transformers and application of diagnostic and localization techniques.This application allows...
查看单位
要求信息