销售冠军
Showing 613-648 of 927 item(s)
PERMEABILITY/FLUIDISATION STUDIES UNIT - PEFP
  • PEFP
Available
11.1.1.- 流化
PEFP
渗透/流化研究小组
The Permeability/Fluidisation Studies Unit, "PEFP", allows to observe the behaviour of liquid fluidisation in a granular bed. The main element is a permeability meter. It is a transparent cylinder that supports the soil sample to be studied....
DEMONSTRATION INFILTRATION UNIT - PEDI
  • PEDI
Available
13.1.- 水文水文地质学
PEDI
渗透示范设备
The Demonstration Infiltration Unit, "PEDI", designed by EDIBON, is a small scale unit designed to demonstrate infiltration processes and to understand the effects of soil texture and structure on infiltration and the effects of existing moisture...
TEMPERATURE TEST MODULE - BS2
  • 配件 BS
Available
6.1.2.1.- 传感器和电子仪器
BS2
温度测试模块
配件 BS
The Temperature Test Module, "BS2", has been designed to teach the use and applications of sensors of temperature as a measure, and its control.We have a half-open space in whose interior there are two lamps that are going to heat that space....
RADIAL PRESSURE DISTRIBUTION IN A JOURNAL BEARING - MEMT-1
Available
7.1.5.- 摩擦学 (摩擦, 磨损, 润滑)
MEMT-1
滑动轴承中的径向压力分布
配件 MEMT
This unit allows the visualization of the radial pressure distribution in a journal bearing with hydrodynamic lubrication.The "MEMT-1" unit consists of a journal bearing with hydrodynamic lubrication, a freely moving bearing housing with thirteen...
UNIT TO STUDY A SHAFT WITH JOURNAL BEARINGS ASSEMBLY - SJBA
  • SJBA
Available
7.4.2.- 可拆卸模型
SJBA
滑动轴承树安装设备
The Unit to Study a Shaft with Journal Bearings Assembly, "SJBA", unit consists of two shaft bearings at the ends and a ground steel shaft. The slide bearing consists of two parts, the bearing itself, which is the part of the assembly that is in...
SLIDER CRANK MECHANISM - MBD
  • MBD
Available
7.1.2.1.- 机制
MBD
滑块连杆机构
The Slider Crank Mechanism, "MBD", designed by EDIBON, is an example of slider-crank mechanism.This mechanism is made of aluminum and consists of a rotary element (graduated disc), called crank, connected to a rigid bar, calledconnecting rod. When...
DYNAMIC FRICTION OF A CYLINDER ON A ROLLER - MEMT-2
Available
7.1.5.- 摩擦学 (摩擦, 磨损, 润滑)
MEMT-2
滚筒上圆柱体的动态摩擦
配件 MEMT
This unit allows to demonstrate the friction forces between several cylinders of different materials and a roller under different lubrication conditions.The "MEMT-2" unit consists of two levers that transmit a force applied by weights to a test...
FILTERS MODULE - N-M8
  • N-M8
Available
14.2.1.2.- 模拟电子
N-M8
滤波器模块
An electronic filter is an element that allows electrical signals to pass through it, at a specific frequency or frequency ranges while preventing the passage of others, being able to modify both, their amplitude and phase. It is a device that...
PACKING LINE AND BOTTLING PLANT  - N-EM-PELE
  • N-EM-PELE
Available
6.2.2.1.- 制造系统
N-EM-PELE
灌装厂和包装线
The "N-EM" are a series of emulators that provide the students the required hardware to emulate the most common automatic systems.The "N-EM" modules are designed to work with the "AE-PLC" units to obtain the fundamental knowledge of PLC...
HEAT EXCHANGER TRAINING SYSTEM - TICB
  • TICB
Available
9.7.- 换热器
TICB
热交换器训练系统
Heat exchangers are widely used in refrigeration, air conditioning, heating, energy generation, chemical processing, etc. They have many applications in engineering and, as a consequence, there are many models adapted to each application to obtain...
COMPUTER CONTROLLED HEAT EXCHANGERS TRAINING SYSTEM - TICC
  • TICC
Available
9.7.- 换热器
TICC
热交换器训练系统,电脑控制(PC)
The Computer Controlled Heat Exchangers Training System, "TICC", has been designed by EDIBON to study and compare different types of small-scale heat exchangers working with parallel or counterflow arrangements.The minimum supply consists of two...
HEAT TRANSFER SERIES - TSTCB
  • TSTCB
Available
9.6.- 传播热量
TSTCB
热传递研究系列
The Heat Transfer Series, "TSTCB," has been designed by EDIBON to study and compare different types of heat transfer on a small scale. It allows a wide range of heat transfer demonstrations and study the factors affecting and problems associated...
COMPUTER CONTROLLED HEAT TRANSFER SERIES - TSTCC
  • TSTCC
Available
9.6.- 传播热量
TSTCC
热传递研究系列,由计算机(PC)控制
The Computer Controlled Heat Transfer Series, "TSTCC," has been designed by EDIBON to study and compare different types of heat transfer on a small scale. It allows a wide range of heat transfer demonstrations and study the factors affecting and...
COMPUTER CONTROLLED THERMO-ELECTRIC HEAT PUMP - TBTC
  • TBTC
Available
5.3.11.- 其他非常规系统
TBTC
热电热泵,由计算机(PC)控制
The Computer Controlled Thermo-Electric Heat Pump, "TBTC", has been designed by EDIBON to study of different phenomena in which heat and electricity take place (Thermoelectricity). Some of them are the Peltier effect, the Thomson or Lenz effect...
BOMB CALORIMETER - TBCF
  • TBCF
Available
9.1.- 热力学的基本原理和基本概念
TBCF
热量计泵
Bomb Calorimeter, "TBCF", comprises the calorimeter, a calorimeter vessel, an outer double walled water jacket, control unit to switch on/off the stirrer and the ignition device, an accurate thermometer and charging unit with pressure gauges to...
LIGHT TEST MODULE - BS10
  • 配件 BS
Available
6.1.2.1.- 传感器和电子仪器
BS10
照明测试模块
配件 BS
The objective of the Light Test Module, "BS10", is to show some of the techniques used to measure light or illumination intensity.The module is equipped with a lamp whose light intensity can be controlled by the variation of the voltage...
PILOT PLANT FOR THE PRODUCTION OF COOKED PIECES AND SAUSAGES - CA00/COPS
  • CA00/COPS
Available
肉类试验工厂
CA00/COPS
熟制零件和熟制肉制品生产试验工厂
CA00/COPS. Pilot Plant for the Production of Cooked Pieces and Sausages. With this pilot plant, designed by EDIBON, we are able to obtain cooked products from untreated meat, following the following process:To prepare this type of product, the...
PILOT PLANT FOR THE PRODUCTION OF CURED PIECES AND SAUSAGES - CA00/CUPS
  • CA00/CUPS
Available
肉类试验工厂
CA00/CUPS
熟制零件和腌制肉制品生产试验工厂
CA00/CUPS. Pilot Plant for the Production of Cured Pieces and Sausages. With this pilot plant, designed by EDIBON, we are able to obtain cured products from untreated meat following the following process:First, the meat that has been weighed and...
FUEL CELL ENERGY APPLICATION - AEL-FCLL
  • AEL-FCLL
Available
5.3.9.- 氢燃料电池
AEL-FCLL
燃料电池应用
The Fuel Cell Energy Application, "AEL-FCLL", has been designed by EDIBON to demonstrate how fuel cells work.This application includes a proton exchange membrane (PEM) fuel cell stack composed of several cells in the shape of a ribbed plate that...
PHOTOVOTAIC SYSTEMS APPLICATION IN ISOLATED AND PARALLEL GRIDS - AEL-PHIP
  • AEL-PHIP
Available
5.3.1.- 光伏太阳能
AEL-PHIP
独立和并联光伏电力系统应用
The Photovoltaic Systems Application in Isolated and Parallel Grids, "AEL-PHIP", has been designed by EDIBON to study the operations carried out in photovoltaic power systems which operate isolated from the national energy grid (island operation)...
ENVIRONMENTAL MEASUREMENTS - M46
  • M46
Available
14.2.1.5.- 仪表与控制
M46
环境测量模块
Environmental measurement is a data collection process. In other words, it is a continuous and systematic follow-up study of environmental variables (air quality and speed, humidity, pressure, etc.). The aim is to identify and evaluate...
BIOMEDICAL MICROWAVE THERMAL EFFECTS TEACHING UNIT - BIMTE
  • BIMTE
Available
14.3.- 生物医学设备
BIMTE
生物医学微波热效应单元
The Thermal Effects of Microwaves in Biomedicine Unit, "BIMTE", designed by EDIBON, allows the students to test microwave therapy, so as to achieve a better knowledge on its functioning and internal mechanism.The Thermal Effects of Microwaves in...
BIOMEDICAL ELECTROSURGERY UNIT - BICIR
  • BICIR
Available
14.3.- 生物医学设备
BICIR
生物医学电刀设备单元
The Unit for Study of Electrosurgery in Biomedicine, "BICIR", consists of an electrosurgical unit used in modern medicine to cut tissues, restrict blood flow and improve the surgeon’s visibility during interventions. The unit includes a protective...
BIOMEDICAL MAGNETOTHERAPY TEACHING UNIT - BIMAG
  • BIMAG
Available
14.3.- 生物医学设备
BIMAG
生物医学磁疗设备单元
The Biomedical Magnetotherapy Teaching Unit, "BIMAG", designed by EDIBON, allows the students to test magnetotherapy, so as to achieve a better knowledge on its functioning and internal mechanism.The Biomedical Magnetotherapy Teaching Unit,...
BIODIESEL PROCESS UNIT - EBDB
  • EBDB
Available
5.3.7.- 生物燃料
EBDB
生物柴油的工艺设备
The process carried out by the Biodiesel Process Unit, "EBDB", consists on transforming the fatty acids contained in vegetable oils into a high energy content biofuel.Basically, the process consists of two well-defined stages:Stage I: Mixing the...
BIOMASS POWER PLANT SIMULATOR - PSV-BPP-SOF
Available
5.1.3.1.- 发电
PSV-BPP-SOF
生物质能源发电厂模拟器
配件 PSV-PPSS
The operation and structure of biomass plants are based on the Rankine steam cycle, with the characteristic that the fuel burned in the boiler is organic matter called biomass, serving as a type of energy that can be considered renewable. In this...
CONCENTRIC TUBE HEAT EXCHANGER FOR TICB - TITCB
Available
9.7.- 换热器
TITCB
用于 TICB 的同心管热交换器
配件 TICB
The Concentric Tube Heat Exchanger for TICB, "TITCB", designed by EDIBON, allows for the study of heat transfer between two fluids: the hot water flowing through the inner tube and the cold water flowing through the annular zone between the inner...
SHELL & TUBE HEAT EXCHANGER FOR TICB - TICTB
Available
9.7.- 换热器
TICTB
用于 TICB 的壳管式热交换器
配件 TICB
The Shell and Tube Heat Exchanger for TICB, "TICTB", designed by EDIBON, provides a comprehensive environment for the study of heat transfer. It allows analysis of the overall energy balance, heat losses in parallel and counterflow configurations,...
CROSS FLOW HEAT EXCHANGER FOR TICC - TICF
Available
9.7.- 换热器
TICF
用于 TICC 的交叉流热交换器
配件 TICC
The Cross-Flow Heat Exchanger for TICC, "TICF", designed by EDIBON, provides an effective thermal research tool by enabling the study of heat transfer between two fluids in a cross-flow configuration. In this system, a stream of hot water from the...
要求信息