Food Technology is a branch of Food Science based on multidisciplinary knowledge of nutrition, chemical analysis, physics, biochemistry and engineering. Water treatment technologies obtain drinking water, so necessary for our life.
Both disciplines have become in recent years an indispensable...
AUHT/CTS UHTユニット、コンピュータ制御およびタッチスクリーン
革新的なシステム
The Computer Controlled and Touch Screen UHT Unit, "AUHT/CTS", is a compact design and easy installation pilot plant that works as independent unit or as part of an integrated process finishing that allows for studying in depth the pasteurization process of products and the variables of the process.
関連ニュース
概要
The Computer Controlled and Touch Screen UHT Unit, "AUHT/CTS", is a compact design and easy installation pilot plant that works as independent unit or as part of an integrated process finishing that allows for studying in depth the pasteurization process of products and the variables of the process.
The Computer Controlled and Touch Screen UHT Unit, "AUHT/CTS", follows a continuous process working mode and allows either for working with large batches or a more economical operation, since the maximum working capacity will be 15 l minimum.
It can operate with a great variety of products: beer, jellies, creams, sauces, etc. The unit is suitable to work with food since materials employed are appropriate for that use. A static stirrer is included to be used with high viscosity products.
At the same time, the unit allows to compare the UHT process using tube or plate heat exchangers. Switching from one system to the other is done by means of a computer controlled pneumatic solenoid valve.
The product is introduced into the plant through a computer controlled speed pump.
The product preheating, heating and cooling stages can be done either in a tube heat exchanger or in a plate heat exchanger.
To guarantee that the product keeps a high temperature for several seconds to kills microorganisms, there is a retention tube to extend the retention time.
Finally, the unit also includes a bypass system to divert the product that has not been treated to the adjusted temperature. Computer controlled solenoid valves are used both in this system and to perform the heat exchanger selection.
The pilot plant allows for connecting several elements, such as a homogenizer, if necessary. There is a connection after the heating stage.
An additional plate exchanger is included to optimize the cooling of the product depending on the flow.
The instrumentation required to analyze all the important parameters of the process is also included: temperature, flow, level and pressure.
Additionally, the pilot plant includes a color 10 inches HMI display to visualize and activate the controls and indicators required: product supply pump and water pump, level sensors and lack of product or water warning alarm, solenoid valves, etc.
The software included with the unit allows real time data acquisition, allowing a manual operation of the plant stages.
This Computer Controlled and Touch Screen Unit is supplied with the EDIBON Computer Control System (SCADA), and includes: The unit itself + Computer Control, Data Acquisition and Data Management Software Packages, for controlling the process and all parameters involved in the process.
演習と指導の慣行
マニュアルに含まれるガイド付き実習
- Milk pasteurization, comparison of raw and treated product.
- Control of pathogenic bacteria, useful life assessment.
- Energy balances.
- Built-in clean in place (CIP).
- Analysis of the two-stage cooling option.
- Study of different types of heat exchanger.
- Study of the continuous operation mode.
- Study of the batch operation mode.
より実用的な練習をして、ユニットを完成させる
- Many students view results simultaneously. To view all results in real time in the classroom by means of a projector or an electronic whiteboard.
- Open Control, Multicontrol and Real Time Control. This unit allows intrinsically and/or extrinsically to change the span, gains, proportional, integral, derivative parameters, etc, in real time.
- The Computer Control System with SCADA and PID Control allow a real industrial simulation.
- This unit is totally safe as uses mechanical, electrical/electronic, and software safety devices.
- This unit can be used for doing applied research.
- This unit can be used for giving training courses to Industries even to other Technical Education Institutions.
- Control of the AUHT/CTS unit process through the control interface box without the computer.
- Visualization of all the sensors values used in the AUHT/CTS unit process.
- Several other exercises can be done and designed by the user.
補完的な機器
12.2.- 乳製品の処理
DSNC
The Computer Controlled Teaching Cream Separator, "DSNC", allows the study of the separation of a dense phase liquid from a lighter phase liquid, in particular the separation of the cream from the milk in a disk stack centrifuge. The system is...
12.2.- 乳製品の処理
DSN
指導用クリーム分離装置
The Teaching Cream Separator, "DSN", allows the study of the separation of a dense phase liquid from a lighter phase liquid, in particular the separation of the cream from the milk in a disk stack centrifuge.The system is mounted on a table base...
12.2.- 乳製品の処理
EMANC
コンピューター制御指導用バター製造装置
The Computer Controlled Butter Maker Teaching Unit, "EMANC", has been designed to provide practical training in the manufacture of butter.The main structure is a stainless steel tank with a capacity of 25 l. At the top, a cover made of stainless...
12.2.- 乳製品の処理
EMAN
指導用バター製造装置
The Butter Maker Teaching Unit, "EMAN", has been designed to provide practical training in the manufacture of butter.The main element is a 25 l capacity tank made of stainless steel. At the top, a cover made of stainless steel with four catches...
12.2.- 乳製品の処理
PADC
コンピューター制御自立型低温殺菌指導装置
The Computer Controlled Teaching Autonomous Pasteurization Unit "PADC" receives cold milk from a refrigeration tank (not included). The milk is impelled with a milk pump (computer controlled). It is heated in the heat exchanger, by counter-current...
12.2.- 乳製品の処理
PASC
コンピューター制御実験室用低温殺菌装置
The Computer Controlled Laboratory Pasteurizer, "PASC", allows continuous flow conditions with flow rates between 1 and 30 l of product per hour. Temperatures up to 90 °C can be obtained and residence times and efficiencies can be changed. The...
12.2.- 乳製品の処理
CCDC
コンピューター制御凝固指導用タンク
The Computer Controlled Teaching Curdling Tank, "CCDC", is employed to curdle milk, which is an essential process to make cheese.The unit has tank, water jacket, coil with one inlet and outlet for the water of the boiler, inlet for the water of...
12.2.- 乳製品の処理
PVQC
コンピューター制御指導用チーズ垂直型加圧装置
The Computer Controlled Teaching Cheese Press, "PVQC", consist of a pneumatic press to compress the fresh curd in order to remove excess of whey, since spoilage of the cheese is hastened by retention of too much water in the finished cheese. This...
12.2.- 乳製品の処理
DVCP
チーズ作り用オランダ風チーズタンク(最大50リットル)
The Dutch Vat for Cheese Production (up to 50 l), "DVCP", has a tank with water jacket, coil with inlet and outlet for water from the boiler, jacket water inlet, serum drainage valve and set of accessories for the agitation, cutting and drain of...
12.2.- 乳製品の処理
IYDC
コンピューター制御指導用ヨーグルト定温器
The Computer Controlled Teaching Yogurt Incubator, "IYDC", is called yogurt maker or yogurt heater. This yogurt maker consists of an insulated central body where yogurt fermentation is carried out.There is a series of shelves inside to place the...
12.2.- 乳製品の処理
RDC
コンピューター制御指導用カッテージチーズ製造装置
The Computer Controlled Teaching Cottage Cheese Maker, "RDC", is a unit made of stainless steel AISI 304 with a cover at the top. The tank receives milk the bacteria culture and others additives and temperature in the tank increases. This process...
12.2.- 乳製品の処理
AEQC
コンピューター制御チーズバット
The Computer Controlled Cheese Vat, "AEQC", is a small scale unit designed to reproduce industrial cheese making operations.The main element is a hygienic vat made of stainless steel and mounted on a working frame.The vat has a jacket through...