销售冠军
Showing 865-900 of 950 item(s)
12 24 36
  • CMVAS
Available
7.1.4.- 振动和振荡
CMVAS
设备综合机械振动分析
The Comprehensive Mechanical Vibration Analysis Unit, "CMVAS", has been designed by EDIBON for an in-depth study of vibrations in mechanical systems, a phenomenon present in most industrial and engineering processes. These vibrations can lead to...
查看单位
WHIRLING OF SHAFTS UNIT - MEER
  • MEER
Available
7.1.4.- 振动和振荡
MEER
设备轴旋转研究设备
The Whirling of Shafts Unit, "MEER", has been designed by EDIBON for the experimental study of rotor dynamics and the vibration phenomena associated with rotating flexible shafts. The unit allows the analysis of critical speeds, resonance...
查看单位
PEM FUEL CELL ADVANCED UNIT - EC6B
  • EC6B
Available
5.3.9.- 氢燃料电池
EC6B
质子交换膜燃料电池组（先进）
The PEM Fuel Cell Advanced Unit, "EC6B", has been designed by EDIBON to allow the students to understand the fuel cells technology, especially that of a proton exchange membrane fuel cell (PEM). It also enables to calculate several fundamental...
查看单位
PEM FUEL CELL UNIT - EC5B
  • EC5B
Available
5.3.9.- 氢燃料电池
EC5B
质子交换膜燃料电池设备
The PEM Fuel Cell Unit, "EC5B", has been designed by EDIBON to allow the students to understand the fuel cells technology, specially that of a proton exchange membrane fuel cell (PEM). It also enables to calculate several fundamental parameters of...
查看单位
COMPUTER CONTROLLED SUPERSONIC WIND TUNNEL (THREE BLOWERS) - TAS25/100C-3B
  • TAS25/100C-3B
Available
8.6.- 空气动力学
TAS25/100C-3B
超音速风洞（三个风扇），电脑控制（PC）
The Computer Controlled Supersonic Wind Tunnel (Three Blowers), "TAS25/100C-3B", designed by EDIBON, is an open wind tunnel for the study of the aerodynamic properties of different drag bodies subject to subsonic and supersonic flows. Airflows...
查看单位
COMPUTER CONTROLLED SUPERSONIC WIND TUNNEL - TAS25/100C
  • TAS25/100C
Available
8.6.- 空气动力学
TAS25/100C
超音速风洞，电脑控制（PC）
The Computer Controlled Supersonic Wind Tunnel, "TAS25/100C", designed by EDIBON, is an open wind tunnel for the study of the aerodynamic properties of different drag bodies subject to subsonic and supersonic flows. Air flows through a vacuum...
查看单位
ROLLING FRICTION IN WHEELS - MEMT-4
Available
7.1.5.- 摩擦学 (摩擦, 磨损, 润滑)
MEMT-4
车轮的滚动摩擦
配件 MEMT
This unit allows to determine the slip forces between two rotating friction discs in contact.The slip between the discs is maintained constant by a gearbox. The pressure can be adjusted with a lever and a set of weights. The unit includes a vessel...
查看单位
ROTAMETER - FME36
  • FME36
Available
8.1.2.- 测量
FME36
转子流量计
The Rotameter, "FME36", designed by EDIBON, is a device developed for the study of flow measurement in fluid systems. This unit allows students to analyze the operating principle of variable area flowmeters with a float, which are widely used in...
查看单位
TACHOMETER TEST MODULE - BS7
  • 配件 BS
Available
6.1.2.1.- 传感器和电子仪器
BS7
转速计测试模块
配件 BS
Tachometer Test Module, "BS7", has been designed by EDIBON to teach linear and angular speed measurement techniques. In this module placed on the upper part we have a miniature motor used to move the axle. The motor speed can be changed adjusting...
查看单位
AXIAL FLOW TURBINE - FME27
  • FME27
Available
8.1.7.- 液压机: 涡轮机
FME27
轴流式水轮机
With the Axial Flow Turbine unit, "FME27", designed by EDIBON, it is possible to study and to understand the axial flow turbines which, unlike the radial flow turbines, the working fluid is parallel to the axis of rotation.This unit consists of an...
查看单位
COMPUTER CONTROLLED AXIAL PUMP BENCH - PBAC
  • PBAC
Available
8.7.1.- 帮浦
PBAC
轴流泵测试台，通过计算机控制（PC）
The Computer Controlled Axial Pump Bench, "PBAC", has been designed by EDIBON to study this type of pumps. It is a bench-top unit that consists of a computer controlled axial pump, a water tank and circulation pipes with a flow regulation valve....
查看单位
COMPUTER CONTROLLED AXIAL FLOW TURBINE - TFAC
  • TFAC
Available
5.3.6.- 液压能源
TFAC
轴流涡轮机，电脑控制（PC）
The Computer Controlled Axial Flow Turbine, "TFAC", consists of a small-scale turbine with single-stage axial flow input. It has eight nozzles that act as water rings to the rotor, four of which have an incidence angle of 20º and the other four of...
查看单位
RADIATION HEAT TRANSFER MODULE FOR TSTCB - TXC/RCB
Available
9.6.- 传播热量
TXC/RCB
辐射传热设备（用于TSTCB）
配件 TSTCB
The Radiative Heat Transfer Unit for TSTCB, "TXC/RCB", enables the study of the principles of heat transfer and exchange by radiation.Bench-top unit designed to demonstrate the laws of radiant heat transfer and radiant heat exchange.It basically...
查看单位
RADIATION HEAT TRANSFER MODULE FOR TSTCC - TXC/RC
Available
9.6.- 传播热量
TXC/RC
辐射传热设备（用于TSTCC）
配件 TSTCC
The Radiation Heat Transfer Unit for TSTCC, "TXC/RC," allows the study of the principles of heat transfer and exchange by radiation.Bench-top unit designed to demonstrate the laws of radiant heat transfer and radiant heat exchange.
查看单位
SWITCHING IN TRANSMISSION AND DISTRIBUTION SUBSTATIONS APPLICATION - AEL-SST-01
  • AEL-SST-01
Available
5.1.3.3.- 功率和负载分配
AEL-SST-01
输电和配电变电站操作应用
The Switching in Transmission and Distribution Substations Application, "AEL-SST-01", has been developed by EDIBON to study the most common operations carried out in these substations, such as, transference of the electrical service from the first...
查看单位
TRANSMISSION LINES UNIT - ELT
  • ELT
Available
3.2.1.- 调制, 编码和信号处理理论
ELT
输电线路设备
The Transmission Lines Unit, "ELT", has been designed by EDIBON to study a standardized coaxial line to analyze realistic measurements.The Transmission Lines Unit "ELT" has been designed as integrated unit for help the student to understand the...
查看单位
APPLICATIONS FOR PROCESS CONTROL - APC
  • APC
Available
10.3.- 工业应用和系统
APC
过程控制应用
The Applications for Process Control, "APC", designed by EDIBON, allows the student to design, assemble and configure various control systems, apart from studying the fundamentals of the control engineering on which they are based.These...
查看单位
COMPUTER CONTROLLED PROCESS CONTROL (SPEED CONTROLLER) - UCPCV
  • UCPCV
Available
6.1.1.3.- 工业系统应用
UCPCV
过程控制（变频器），由计算机控制（PC）
The Computer Controlled Process Control Unit (Speed Controller), "UCPCV", designed by EDIBON, allows the study of several types of automatic control and can be used to control different variables (flow, level, temperature, pressure, pH,...
查看单位
COMPUTER CONTROLLED PROCESS CONTROL (PNEUMATIC VALVE) - UCPCN
  • UCPCN
Available
6.1.1.3.- 工业系统应用
UCPCN
过程控制（气动阀），由计算机控制（PC）
The Computer Controlled Process Control (Pneumatic Valve), "UCPCN", designed by EDIBON, allows the study of several types of automatic control and can be used to control different variables (flow, level, temperature, pressure, pH, conductivity and...
查看单位
COMPUTER CONTROLLED PROCESS CONTROL (ELECTRONIC VALVE) - UCP
  • UCP
Available
6.1.1.3.- 工业系统应用
UCP
过程控制（电子阀），由计算机控制（PC）
The Computer Controlled Process Control (Electronic Valve), "UCP", designed by EDIBON, allows the study of several types of automatic control and can be used to control different variables (flow, level, temperature, pressure, pH, conductivity and...
查看单位
OPERATIONAL AMPLIFIERS KIT - M7/KIT
Available
2.2.- 电路组件套件
M7/KIT
运放套件
配件 M-KITS
With Operational Amplifiers Kit, "M7/KIT", designed by EDIBON, the different amplifiers can be studied: inverting, non-inverting, additive, differential and comparators.
查看单位
OPERATIONAL AMPLIFIERS MODULE - N-M7
  • N-M7
Available
14.2.1.2.- 模拟电子
N-M7
运算放大器模块
Operational amplifiers are compact, active, linear and high-gain devices designed to provide the desired transfer function. An operational amplifier consists of an electronic circuit having two inputs and one output. The output is the difference...
查看单位
FLEXIBLE MANUFACTURING SYSTEM 5 - AE-PLC-FMS5
  • AE-PLC-FMS5
Available
6.2.6.- 带PLC的柔性制造系统
AE-PLC-FMS5
运输、分类、选择和气动处理的柔性制造系统
The Flexible Manufacturing System for Transport, Classification, Selection, and Pneumatic Handling, "AE-PLC-FMS5," designed by EDIBON, is a highly adaptable and configurable system designed for the study and application of advanced automation...
查看单位
CRANK MECHANISM - MBI
  • MBI
Available
7.1.2.1.- 机制
MBI
连杆机构
The Crank Mechanism "MBI", is a unit designed to observe, study and record the motion of a crank and the forces involved in a simple engine mechanism. The piston is linearly displaced through a cylinder with the aid of a guide.Bearings are coupled...
查看单位
COMPUTER CONTROLLED CONTINUOUS CYCLE OIL PRODUCTION PLANT - PACC
  • PACC
Available
12.1.- 食品科技
PACC
连续循环油生产装置，计算机控制（PC）
Computer Controlled Continuous Cycle Oil Production Plant, "PACC", designed by EDIBON, allows the teaching and research of the process of obtaining olive oil, measuring the acidity of the oil, as well as the study of the yield of the...
查看单位
CONTINUOUS STIRRED TANK REACTOR FOR QR - QRCA
  • 配件 QR
Available
11.2.- 化学反应器
QRCA
连续搅拌反应器（QR用）
配件 QR
The Continuous Stirred Tank Reactor for QR, "QRCA", designed by EDIBON, provides a controlled environment for detailed kinetic study of homogeneous liquid-liquid chemical reactions. This type of reactor, also known as CSTR (Continuous Stirred-Tank...
查看单位
COMMUNICATIONS LABORATORY - LICOMBA
  • LICOMBA
Available
3.1.- 电源, 测量设备和配件
LICOMBA
通信综合实验室：
The LICOMBA provides the students a complete equipment to study the basic and advanced concepts about analog and digital communication.With this unit the students can learn the main communication concepts, analog and digital modulations and...
查看单位
UNIVERSAL MATERIAL TESTING UNIT - EEU/20KN
  • EEU/20KN
Available
7.3.2.1.- 机械测试
EEU/20KN
通用材料测试装置-20KN
The Universal Material Testing Unit, "EEU/20KN", designed by EDIBON, is a didactic bench-top universal material testing unit. It is distinguished by its rigid construction, accurate control and a precise hydraulic system to apply loads of up to 20...
查看单位
BUILDING CONTROL TRAINING APPLICATION VIA BMS - AEL-KNX-BMS
Available
4.2.4.- KNX / EIB家庭/建筑自动化
AEL-KNX-BMS
通过BMS的建筑控制培训应用
配件 AEL-KNX
The AEL-KNX-BMS, Building Control Training Application via BMS, allows the exploration of how KNX contributes to integrated building management. This set of devices are essential in large systems where visualization and management of system...
查看单位
UNIT FOR STUDYING FORCES IN DIFFERENT SINGLE PLANE TRUSSES - MFCS1
  • MFCS1
Available
7.1.6.- 结构力学
MFCS1
通过不同平面杆架学习力学的设备
The Unit for studying Forces in Different Single Plane Trusses, "MFCS1", designed by EDIBON, allows the measurement of the bar forces in various single plane trusses, the study of the dependency on the external force and the comparison of the...
查看单位
要求信息