Verkaufshits

181 - 216 von 921 Artikel(n)

Zubehör von TSTCB

Available

9.6.- WÄRMEÜBERTRAGUNG

TSTCB/EC

Elektronische Konsole (gemeinsam für verfügbare Module vom Typ "TXC/...B")

Zubehör von TSTCB

The Heat Transfer Series, "TSTCB," has been designed by EDIBON to study and compare different types of heat transfer on a small scale. It allows a wide range of heat transfer demonstrations and study the factors affecting and problems associated...

FLYWHEEL ENERGY STORAGE POWER PLANT - PWP-FE

Zubehör von AEL-CPSS-01S, AEL-CPSS-01S, AEL-CPSS-01S, MPGDC, AEL-MGP, AEL-MGP

Available

5.2.- MIKROGRIDE

PWP-FE

Energiespeicher-Kraftwerk mit Schwungrad

Zubehör von AEL-CPSS-01S, AEL-CPSS-01S, AEL-CPSS-01S, MPGDC, AEL-MGP, AEL-MGP

The Flywheel Energy Storage Power Plant, "PWP-FE", designed by EDIBON, demonstrates the importance of energy storage in isolated environments.In this case, it is a sophisticated application in charge of storing kinetic energy through a flywheel....

PARALLEL POWER GENERATION SYSTEM WITH TWO GENERATORS, TWO DISTRIBUTION LINES AND LOADS, WITH SCADA - AEL-CPSS-03S

AEL-CPSS-03S

Available

5.1.3.1.- STROMERZEUGUNG

AEL-CPSS-03S

Energieversorgungssystem mit zwei parallel geschalteten Generatoren, zwei Verteilungsleitungen und Lasten, mit SCADA

A Smart Grid is an advanced electrical grid that uses analog information, digital information and communications technology to gather and act on information about the behavior of suppliers and consumers, in an automated way to improve the...

EXTENDED CONCENTRIC TUBE HEAT EXCHANGER FOR TICC - TITCA

Zubehör von TICC

Available

9.7.- WÄRMETAUSCHER

TITCA

Erweiterter Koaxialrohr-Wärmetauscher für TICC

Zubehör von TICC

The Expanded Concentric Tube Heat Exchanger for TICC, "TITCA", designed by EDIBON, allows for detailed study of heat transfer between two fluids: the hot water flowing through an inner tube and the cold water circulating in the annular space...

EXTENDED PLATE HEAT EXCHANGER FOR TICB - TIPLAB

Zubehör von TICB

Available

9.7.- WÄRMETAUSCHER

TIPLAB

Erweiterter Plattenwärmetauscher für TICB

Zubehör von TICB

The Expanded Plate Heat Exchanger for TICB, "TIPLAB", designed by EDIBON, enables detailed study of heat transfer between hot and cold water flowing through alternate channels formed between parallel plates. This unit facilitates analysis of heat...

EXTENDED PLATE HEAT EXCHANGER FOR TICC - TIPLA

Zubehör von TICC

Available

9.7.- WÄRMETAUSCHER

TIPLA

Erweiterter Plattenwärmetauscher für TICC

Zubehör von TICC

Extended Plate Heat Exchanger for TICC: It has been designed to study the heat transfer between hot water and cold water flowing through alternate channels formed between parallel plates.

Zubehör von LIMEBA

Available

7.1.1.- MECHANICS FUNDAMENTALS KITS

MECA3

Experimente zu Getrieben

Zubehör von LIMEBA

Most recent machines require the transmission of motion between elements to obtain the desired mechanical result. The mechanisms studied in this module are those that transmit motion between two axles.

LOAD ELEVATION MECHANISMS EXPERIMENTS - MECA2

Zubehör von LIMEBA

Available

7.1.1.- MECHANICS FUNDAMENTALS KITS

MECA2

Experimente zu Hebemechanismen für Lasten

Zubehör von LIMEBA

Experimentation with the most important load lifting mechanisms.Study of the work and performance of different mechanisms.

Zubehör von LIMEBA

Available

7.1.1.- MECHANICS FUNDAMENTALS KITS

MECA6

Experimente zu speziellen Mechanismen

Zubehör von LIMEBA

This module considers various mechanisms frequently used in industrial processes, without them some operations would not be possible with the same efficiency. Here these mechanisms are shown and their function analyzed.

Zubehör von LIMEBA

Available

7.1.1.- MECHANICS FUNDAMENTALS KITS

MECA4

Experimente zur Dynamik

Zubehör von LIMEBA

Dynamics is the part of Mechanics that analyzes the motion of an element or mechanism caused by a force. Thus the study is concentrated on the basic laws of Dynamics.

Zubehör von LIMEBA

Available

7.1.1.- MECHANICS FUNDAMENTALS KITS

MECA5

Experimente zur Reibung

Zubehör von LIMEBA

This module considers the most important phenomenon of Dynamics: Friction. It is a manifestation of the energy loss due to contact, effect that happens in every real-world mechanism.

Zubehör von LIMEBA

Available

7.1.1.- MECHANICS FUNDAMENTALS KITS

MECA1

Experimente zur Statik

Zubehör von LIMEBA

Statics is the part of Mechanics that studies any kind of structure or element in balance-equilibrium.Basically the module consist on experiments in which the student shall learn to deduce the main principles of Statics and its most important...

COMPUTER CONTROLLED EXPERIMENTAL IMPULSE TURBINE - HTIC

HTIC

Available

5.3.6.- HYDRAULISCHE ENERGIE

HTIC

Experimentelle Impulsturbine, computergesteuert (PC)

The Computer Controlled Experimental Impulse Turbine, "HTIC", has been designed by EDIBON to study the characteristics and the behavior of a small scale impulse turbine.This unit includes suitable instrumentation to measure the main...

COMPUTER CONTROLLED EXPERIMENTAL REACTION TURBINE - HTRC

HTRC

Available

5.3.6.- HYDRAULISCHE ENERGIE

HTRC

Experimentelle Reaktionsturbine, computergesteuert (PC)

The Experimental Reaction Turbine, Computer Controlled (PC), "HTRC", allows to study the characteristics of operation of a small scale reaction turbine.This unit includes suitable instrumentation to measure the main parameters:There is a pressure...

QRCB

Available

11.2.- CHEMISCHE REAKTOREN

QRCB

Festbett-Katalysereaktoren zur Saccharose-Hydrolyse

Sucrose hydrolysis is a reversible reaction widely used at the industrial level to produce glucose and fructose. This process benefits greatly from catalysis, both chemical and enzymatic, and is a representative example of using fixed-bed reactors...

COMPUTER CONTROLLED CATALYTIC REACTORS - QRCC

QRCC

Available

11.2.- CHEMISCHE REAKTOREN

QRCC

Festbett-Katalysereaktoren zur Saccharose-Hydrolyse, computergesteuert (PC)

PDFD

Available

11.1.11.- FILTRATION, SEDIMENTATION AND MIXING

PDFD

Filter- und Drainagebehälter

The Drainage and Seepage Tank, "PDFD", unit has been designed for the practical demonstration, visualization and experimental study of the flow through permeable media and flows in subsoil.The "PDFD" unit basically consist of a tank (soils...

COMPUTER CONTROLLED DRAINAGE AND SEEPAGE TANK - PDFDC

PDFDC

Available

11.1.11.- FILTRATION, SEDIMENTATION AND MIXING

PDFDC

Filter- und Drainagebehälter, computergesteuert (PC)

The Computer Controlled Drainage and Seepage Tank, "PDFDC", has been designed by EDIBON for the practical demonstration, visualization and experimental study of the flow through permeable media and flows in subsoil.The "PDFDC" basically consist of...

FLEXIBLE MANUFACTURING SYSTEM 14 - AE-PLC-FMS14

AE-PLC-FMS14

Available

6.2.6.- FLEXIBLE HERSTELLUNGSSYSTEME MIT SPS

AE-PLC-FMS14

Flexibles Fertigungssystem für industrielle Prozesssteuerung, Abfüllung, Versiegelung und Lagerung

The Flexible Manufacturing System for Industrial Process Control, Filling, Sealing, and Storage, "AE-PLC-FMS14", is a highly adaptable and configurable system designed for the study and application of advanced automation principles within the...

FLEXIBLE MANUFACTURING SYSTEM 5 - AE-PLC-FMS5

AE-PLC-FMS5

Available

6.2.6.- FLEXIBLE HERSTELLUNGSSYSTEME MIT SPS

AE-PLC-FMS5

Flexibles Fertigungssystem für Transport, Klassifizierung, Auswahl und pneumatische Handhabung

Flexible Manufacturing System for Transport, Classification, Selection, and Pneumatic Handling, "AE-PLC-FMS5," is a highly adaptable and configurable system designed for the study and application of advanced automation principles within the...

FLEXIBLE MANUFACTURING SYSTEM 3 - AE-PLC-FMS3

AE-PLC-FMS3

Available

6.2.6.- FLEXIBLE HERSTELLUNGSSYSTEME MIT SPS

AE-PLC-FMS3

Flexibles Fertigungssystem für Transport, Montage, Auswahl (Material und Farbe) und Lagerung

The Flexible Manufacturing System for Transport, Assembly, Selection (Material and Color), and Storage, "AE-PLC-FMS3", is a highly adaptable and configurable system designed for the study and application of advanced automation principles within...

FLEXIBLE MANUFACTURING SYSTEM 1 - AE-PLC-FMS1

AE-PLC-FMS1

Available

6.2.6.- FLEXIBLE HERSTELLUNGSSYSTEME MIT SPS

AE-PLC-FMS1

Flexibles Fertigungssystem für Transport, Montage, Pressen, Auswahl, Verschraubung und Lagerung

The Flexible Manufacturing System for Transport, Assembly, Pressing, Selection, Screwing, and Storage, "AE-PLC-FMS1", is a highly adaptable and configurable system designed for the study and application of advanced automation principles within the...

FLEXIBLE MANUFACTURING SYSTEM 7 - AE-PLC-FMS7

AE-PLC-FMS7

Available

6.2.6.- FLEXIBLE HERSTELLUNGSSYSTEME MIT SPS

AE-PLC-FMS7

Flexibles Fertigungssystem für Zuführung, Identifikation, Klassifizierung und Transport

The Flexible Manufacturing System for Feeding, Identification, Classification, and Transport, "AE-PLC-FMS7", is a highly adaptable and configurable system designed for the study and application of advanced automation principles within the context...

FLEXIBLE MANUFACTURING SYSTEM 15 - AE-PLC-FMS15

AE-PLC-FMS15

Available

6.2.6.- FLEXIBLE HERSTELLUNGSSYSTEME MIT SPS

AE-PLC-FMS15

Flexibles Fertigungssystem für Zuführung, Montage, Robotik-Handhabung und Transport

The Flexible Manufacturing System for Feeding, Assembly, Robotic Handling, and Transport, "AE-PLC-FMS15", is a highly adaptable and configurable system designed for the study and application of advanced automation principles within the context of...

Available

8.5.- HYDRAULISCHE KANÄLE

CFG

Fluidkanäle

Channel made up of group of modular parts of 2.5 m long. Each rectangular piece of different sections with transparent walls of 10 mm thick is made in such a way that guarantees a uniform section along the entire channel. All the sections are made...

Available

8.5.- HYDRAULISCHE KANÄLE

Fluidkanäle (Sektion: 80X300 mm)

Channel, through which water flows, of rectangular section with transparent walls that enable to observe all the experiments. Water is taken from the storage tank by means of a hydraulic pump and, by the pipe, it is driven to the inlet tank, where...

COMPUTER CONTROLLED FLOW CHANNELS (SECTION: 80 X 300 MM) - CFC

Available

8.5.- HYDRAULISCHE KANÄLE

CFC

Fluidkanäle (Sektion: 80X300 mm), Computergesteuert (PC)

Channel, through which water flows, of rectangular section with transparent walls that enable to observe all the experiments. Water is taken from the storage tank by means of a hydraulic pump, with speed regulation, and, by the pipe, it is driven...

COMPUTER CONTROLLED FLOW CHANNELS - CFGC

CFGC

Available

8.5.- HYDRAULISCHE KANÄLE

CFGC

Fluidkanäle, Computergesteuert (PC)

The Computer Controlled Flow Channels, "CFGC", are hydrodynamic channels to perform multiple hydraulic tests. They consist of a rectangular section channel with tempered glass transparent walls through which water flows. Water is impelled by a...

Available

13.1.- HYDROLOGIE UND HYDROGEOLOGIE

RFS

Fluss-Simulator für Flüsse

The River Flow Simulator, "RFS", designed by EDIBON, allows the simulation and study of the river features, included the flow and solid bed load motion.The main element is a rectangular tank made of stainless steel supported on a metal beam frame,...

FÜR WEITERE INFORMATIONEN, KONTAKTIEREN SIE UNS