Verkaufshits
871 - 900 von 921 Artikel(n)
FILLING PROCESS OF TANKS  - N-EM-PLLT
  • N-EM-PLLT
Available
6.2.2.2.- STUFEN- UND DURCHFLUSSREGELUNG
N-EM-PLLT
Tankfüllprozess
The "N-EM" are a series of emulators that provide the students the required hardware to emulate the most common automatic systems.The "N-EM" modules are designed to work with the "AE-PLC" units to obtain the fundamental knowledge of PLC...
COMPUTER CONTROLLED THERMO-ELECTRIC HEAT PUMP - TBTC
  • TBTC
Available
5.3.11.- ANDERE NICHTKONVENTIONELLE SYSTEME
TBTC
Thermoelektrische Wärmepumpe, computergesteuert (PC)
The Computer Controlled Thermo-Electric Heat Pump, "TBTC", has been designed by EDIBON to study of different phenomena in which heat and electricity take place (Thermoelectricity). Some of them are the Peltier effect, the Thomson or Lenz effect...
BENCH TOP COOLING TOWER - TTEB
  • TTEB
Available
11.1.7.- DRYING AND COOLING
TTEB
Tisch-Kühlturm
The Bench Top Cooling Tower, "TTEB", includes a pump that impels hot water from the tank (with level switch and heating element) to the manifolds located at the top of the cooling tower. Water flow can be adjusted by a manual needle valve.A...
COMPUTER CONTROLLED BENCH TOP COOLING TOWER - TTEC
  • TTEC
Available
11.1.7.- DRYING AND COOLING
TTEC
Tischkühlturm, computergesteuert (PC)
The Computer Controlled Bench Top Cooling Tower, "TTEC", includes a pump that impels hot water from a tank (with level switch and heating element) to the manifolds located at the top of the cooling tower. Water flow can be adjusted by a manual...
SOUND MEASUREMENTS - M48
  • M48
Available
14.2.1.5.- INSTRUMENTATION & KONTROLLE
M48
Tonmessungen
With the Sound Measurement Unit, "M48", designed by EDIBON, different practices related to sound measurements can be carried out. The unit has three different types of components: two types of microphones and a loudspeaker.
PORTABLE FLUE GAS ANALYZER - PFGA
  • PFGA
Available
9.9.- VERBRENNUNGSMOTOREN
PFGA
Tragbarer Verbrennungsgasanalysator
The PFGA unit is a flue gas analyzer stored in a portable case. It is used to check the existence of O2, CO, CO2 and nitrogen oxides in the flue gases from home heating systems with simultaneous measurement of the flue gases temperature and the...
STRAIN GAUGE TRAINING UNIT - MEGE
  • MEGE
Available
7.3.1.- FOTOELASTIZITÄT UND STRAIN-MESSUNG
MEGE
Trainingsgerät für Dehnungsmessstreifen
The Strain Gauge Training Unit, "MEGE", provides an introduction to the fundamentals of measurement with strain gauges, to compare how resistance strain gauges work and how they measure strains in different structures (torsion, tension and bending...
CIRCULATING PUMPS TRAINING UNIT - TCPT
  • TCPT
Available
9.10.3.- INSTALLATIONS- UND WARTUNGSPRAXIS
TCPT
Trainingsgerät für Kreiselpumpen
The Circulating Pumps Training Unit, "TCPT", designed by EDIBON, is an advanced tool designed to facilitate the study and understanding of the operation of circulation pumps in heating systems and sanitary techniques. This unit allows...
TEMPERATURE MEASUREMENT TRAINING UNIT - TEMT
  • TEMT
Available
9.10.3.- INSTALLATIONS- UND WARTUNGSPRAXIS
TEMT
Trainingsgerät für Temperaturmessungen
The Temperature Measurement Training Unit, "TEMT", allows to compare the response of several devices to measure the temperature for different flows and different installation position of these devices.The unit includes four different measuring...
WATER HEATERS TRAINING UNIT - WHT
  • WHT
Available
9.2.- HEIZUNG, BELÜFTUNG, KLIMAANLAGE UND HEISSES WASSER
WHT
Trainingsgerät für Warmwasserbereiter
The Water Heater Training Unit, "WHT", allows demonstrating the operation of three types of water heaters. The unit has three heaters, two of them commercial one with electronic ignition and one in millivolt, and a residential gas heater without...
HEAT EXCHANGER TRAINING SYSTEM - TICB
  • TICB
Available
9.7.- WÄRMETAUSCHER
TICB
Trainingssystem für Wärmetauscher
Heat exchangers are widely used in refrigeration, air conditioning, heating, energy generation, chemical processing, etc. They have many applications in engineering and, as a consequence, there are many models adapted to each application to obtain...
TUBULAR FLOW REACTOR - QRFT
Available
11.2.- CHEMISCHE REAKTOREN
QRFT
Turbinenreaktor
Zubehör von QRQC
The Tubular Flow Reactor, "QRFT," specifically designed by EDIBON, is intended for the kinetic study of liquid-liquid homogeneous reactions. This unit allows for a wide range of practices, including the determination of kinetic equations, the...
TUBULAR FLOW REACTOR FOR QR - QRT
  • Zubehör von QR
Available
11.2.- CHEMISCHE REAKTOREN
QRT
Turbinenreaktor für QR
Zubehör von QR
The Tubular Flow Reactor for QR, "QRT", has been designed by EDIBON to conduct the kinetic study of homogeneous liquid-liquid reactions.In this unit, a continuous stream of reactants is passed through, which mix and react as they flow through the...
COMPUTER CONTROLLED TUBULAR FLOW REACTOR FOR QRC - QRTC
  • Zubehör von QRC
Available
11.2.- CHEMISCHE REAKTOREN
QRTC
Turbinenreaktor für QRC, computergesteuert (PC)
Zubehör von QRC
The Computer Controlled Tubular Flow Reactor for QRC, "QRTC", has been designed by EDIBON to conduct the kinetic study of homogeneous liquid-liquid reactions. In this unit, a continuous stream of reactants is passed through, which mix and react as...
TURBULENT FLOW HEAT EXCHANGER FOR TICC - TIFT
Available
9.7.- WÄRMETAUSCHER
TIFT
Turbulenz-Wärmetauscher für TICC
Zubehör von TICC
Heat exchangers with turbulent flow are widely used in various industries such as chemical, food, pharmaceutical, and energy generation. These devices play a fundamental role in heating and cooling fluids, as well as in cooling systems for...
U-SHAPE MANOMETER - HMM-U1000
  • Zubehör von HMM
Available
8.2.- MESSUNG
HMM-U1000
U-Rohr-Manometer
Zubehör von HMM
The U-Shape Manometer, "HMM-U1000," designed by EDIBON, allows the study of various pressures and their relationship with the fluid. It measures the difference in liquid level in its columns, providing vital information for pressure analysis in...
ENVIRONMENTAL MEASUREMENTS - M46
  • M46
Available
14.2.1.5.- INSTRUMENTATION & KONTROLLE
M46
Umweltmesstechnik
Environmental measurement is a data collection process. In other words, it is a continuous and systematic follow-up study of environmental variables (air quality and speed, humidity, pressure, etc.). The aim is to identify and evaluate...
UNIVERSAL MATERIAL TESTING UNIT - EEU/20KN
  • EEU/20KN
Available
7.3.2.1.- MECHANISCHE TESTS
EEU/20KN
Universalgerät für Materialprüfungen
The Universal Material Testing Unit, "EEU/20KN", designed by EDIBON, is a didactic bench-top universal material testing unit. It is distinguished by its rigid construction, accurate control and a precise hydraulic system to apply loads of up to 20...
UNIVERSAL BUCKLING UNIT - MUP
  • MUP
Available
7.3.2.1.- MECHANISCHE TESTS
MUP
Universelles Gerät für Knickversuche
The Universal Buckling Unit "MUP" is a bench-top unit whose frame is made of anodized aluminum profiles and plates and steel elements, on which a bubble level is installed to equilibrate the system.The unit has been designed to carry out tests...
TRAFFIC SIGNAL CONTROL  - N-EM-CST
  • N-EM-CST
Available
6.2.2.5.- VERKEHRSKONTROLLE UND PARKEN
N-EM-CST
Verkehrskontrolle
The "N-EM" are a series of emulators that provide the students the required hardware to emulate the most common automatic systems.The "N-EM" modules are designed to work with the "AE-PLC" units to obtain the fundamental knowledge of PLC...
COMPLETE AIR CONDITIONING SYSTEM MODEL - TRAMC/4
Available
9.10.3.- INSTALLATIONS- UND WARTUNGSPRAXIS
TRAMC/4
Vollständiges Klimatisierungsmodell
Zubehör von TRAMC
The minimum supply consists of two main elements: the TRAMC Unit Base, "TRAMC-UB", and at least one of the required elements described below.The models are interconnected by special refrigerant hoses.The main components of the TRAMC Unit Base,...
FLOW METERS DEMONSTRATION - FMDU
  • FMDU
Available
8.2.- MESSUNG
FMDU
Vorführung von Durchflussmessgeräten
Flow Meters Demonstration, "FMDU", designed by EDIBON, demonstrates the important characteristics of fifteen types of flow meters used in the measurement of water flow through pipes or open channels.The main element is the FMDU Base Unit,...
ROLLING MILL CONTROL  - N-EM-CL
  • N-EM-CL
Available
6.2.2.1.- HERSTELLUNGSSYSTEME
N-EM-CL
Walzensteuerung
The "N-EM" are a series of emulators that provide the students the required hardware to emulate the most common automatic systems.The "N-EM" modules are designed to work with the "AE-PLC" units to obtain the fundamental knowledge of PLC...
Informationen anfordern