In the Thick-Walled Cylinder Unit, "MCPG", the stresses are determined through the measurement of the strains produced on the surface. These strains are measured by strain gauges.The thick-walled vessel consists of an aluminum cylinder of length...

Three-phase voltage is essentially a system of three alternating voltages, coupled (all 3 are produced simultaneously in a generator) and 120º out of phase with each other (i.e. one third of the period).The Three-phase Circuits Module, "N-M18",...

The Deep Bed Filter Unit, "EFLP", allows us to filter a fluid in order to eliminate particles in suspension, to have it in more adequate conditions for its subsequent use or consumption.The pump takes raw water from one of the reservoirs of the...

With the Sound Measurement Unit, "M48", designed by EDIBON, different practices related to sound measurements can be carried out. The unit has three different types of components: two types of microphones and a loudspeaker.

To perform the tests, the test specimen is clamped and twisted by means of a flywheel and a worm gear until it breaks. The force is gradually applied to the specimen to observe the elastic strain produced. The specimen will deform and manifest...

The Torsion Unit, "MTB", allows to verify the basis of torsion and to perform practical exercises to demonstrate:Circular rods elastic torsion equation.The rigidity modulus of different materials.To perform the tests a metallic rod is fastened by...

The Torsional Oscillations Unit, "MOT", is intended for easy experiments. It enables to illustrate and investigate the torsional oscillation in single rotor, multi-rotor and geared systems. The unit basically consists of a rigid frame that have...

The "N-EM" are a series of emulators that provide the students the required hardware to emulate the most common automatic systems.The "N-EM" modules are designed to work with the "AE-PLC" units to obtain the fundamental knowledge of PLC...

The Analog Modulations Unit, "EMDA/A", is a complete analog communications unit designed to explain the basic concepts of analog modulation. It covers the principles of many of the modulation and demodulation techniques used in modern analog...

The Antenna Unit, "EAN", is a complete and affordable unit and no extra hardware is required for complete all the practice set.The "EAN" allows students to learn how to perform the essential antenna measurements: radiation pattern with the measure...

The Computer Controlled Antenna Unit, "EANC", is an advanced system that operates in conjunction with a computer (PC), which allows the control and data acquisition of the antenna measurement by means the SCADA System (control interface box +...

The Bluetooth Unit, "EBL", operates in conjunction with a computer, which is connected with the Bluetooth Dongle, that allows communicating and programming the Bluetooth Devices to perform a simple Bluetooth network.The two Bluetooth Devices...

The Chemical Reactors, "QR", has been designed by EDIBON for the study and comparison of different types of chemical reactors in an easy and simple way and thus allowing, on a small scale, to carry out the necessary studies and practices to...

The Computer Controlled Chemical Reactors, "QRC", has been designed by EDIBON for the study and comparison of different types of chemical reactors in an easy and simple way and thus allowing, on a small scale, to carry out the necessary studies...

The Digital Modulations Unit, "EMDA/D", is a complete digital communications Unit designed to explain the basic concepts of digital modulation. It covers the principles of many of the modulation and demodulation techniques used in modern digital...

The Industrial Controllers Unit, "CECI", is based on a modular design structure whose functionality is divided into different modules toallow the student a better understanding of the unit. The modules included in the unit are: industrial...

The Microwave Unit, "EMI", integrates a microwaves measuring test bench formed by microwaves generator, a kit of different standardized (WR-90) waveguides devices (horns antennas, attenuators, etc) and measure devices for complete the set of...

The Cellular Mobile Trainer "ETM" operates in conjunction with a computer, which is connected with the ETM interface box through a USB connector. The ETM software allows the students to visualize in an easy way the AT commands sent and received to...

The Pulse Modulations Unit, "EMDA/P," has been designed by EDIBON to explain the fundamental concepts of pulse modulation in its entirety. It encompasses the principles of many modulation and demodulation techniques used in modern communication...

The Radar Unit "ERA" is a radar unit, designed by EDIBON, to study the basic principles about the radar technology.The ERA unit uses a compact radar which allows students to acquire solid formation about the operation, configuration and...

The Satellite Unit, "ESA", is an advanced system that operates in conjunction with a computer (PC), which allows students an easy way to manage and visualize the data. The "ESA" software allows to perform multiple actions: configuring the sending...

CODITEL is a digital circuit commutation unit for didactic purposes. Its structure is like a temporal commutator structure with two MIC ways, one inlet way and one outlet way. Basically, it follows the recommendation of the CCITT and of...

The Strain Gauge Training Unit, "MEGE", provides an introduction to the fundamentals of measurement with strain gauges, to compare how resistance strain gauges work and how they measure strains in different structures (torsion, tension and bending...

The Computer Controlled Chemical Reactors Training System, "QRQC," has been designed by EDIBON to facilitate advanced study for students, professors and researchers on the attributes, scenarios, and various types of reactors prevalent in the...

The Computer Controlled Separating and Throttling Calorimeter, "TCESC", has been designed to determine the steam humidity content and the dryness fraction of steam.This unit works with steam. The steam is introduced into the line by means of a...

The Tribology Modular Unit, "MEMT", consists of a base unit with electronic console and a series of experimental units to investigate and visualize tribological phenomena.MEMT-UB. Drive Unit for Tribological Tests. This unit is common for the...

The Drum Brake Unit, "MFT", allows the study of the forces acting on a drum brake, the difference between the braking torque of the primary shoe and secondary shoe braking systems and determining the coefficient of friction between the drum and...

The Drop Ball Viscometer and Resistance Coefficient Determination Unit, "HVB", consists of two precision transparent tubes fixed onto a frame in which a ball is allowed to drop down through different liquids. Both tubes can be filled with liquids...

The "N-EM" are a series of emulators that provide the students the required hardware to emulate the most common automatic systems.The "N-EM" modules are designed to work with the "AE-PLC" units to obtain the fundamental knowledge of PLC...