Verkaufshits

601 - 630 von 921 Artikel(n)

UNIT FOR STUDYING FORCES IN DIFFERENT SINGLE PLANE TRUSSES - MFCS1

MFCS1

Available

7.1.6.- STRUKTURMECHANIK

MFCS1

Gerät zur Untersuchung von Kräften in verschiedenen Aufbauten von ebenen Fachwerken

The Unit for studying Forces in Different Single Plane Trusses, "MFCS1", designed by EDIBON, allows the measurement of the bar forces in various single plane trusses, the study of the dependency on the external force and the comparison of the...

COMPUTER CONTROLLED TEACHING UNIT FOR THE STUDY OF REGULATION AND CONTROL - RYC

Zubehör von RYC/T

Available

6.1.1.1.- THEORETISCH-PRAKTISCHE GRUNDLAGEN

RYC

Gerät zur Untersuchung von Regelung und Steuerung, computergesteuert (PC)

Zubehör von RYC/T

Regulation and control theory is divided into two major divisions in, namely, classical and modern. The implementation of classical controller designs as compared to systems designed using modern control theory is easier and these controllers are...

SIMPLE STABILITY PROBLEMS STUDY UNIT - MEPE

MEPE

Available

7.1.6.- STRUKTURMECHANIK

MEPE

Gerät zur Untersuchung von Stabilitätsproblemen

The Simple Stability Problems Study Unit, "MEPE", has been designed to study the stability of a bar subjected to buckling by obtaining the critical load in different configurations. The unit consists of two bars of same length connected by a...

COMPUTER CONTROLLED TORSIONAL VIBRATION UNIT - MEVTC

MEVTC

Available

7.1.4.- VIBRATIONEN UND OSZILLATIONEN

MEVTC

Gerät zur Untersuchung von Torsionsschwingungen, computergesteuert (PC)

The Computer Controlled Torsional Vibration Unit, "MEVTC", has been designed by EDIBON to study torsion suffered by some shafts with rotation motion, apart from studying the torsional rigidity and the behavior of a torsional vibration system with...

Available

7.2.2.- ZAHNRÄDER, DIFFERENTIALE UND GETRIEBE

MEC

Gerät zur Untersuchung von Überdrehzahl

The Overdrive Unit, "MEC", includes a set of epicyclical gears that represent an application of a simple epicyclic arrangement of the type used in a motor vehicle overdrive.Simple epicyclic set consists of:Sun gear that rotates together with the...

UNIT FOR STUDYING DEFORMATION OF TRUSSES - MFCS3

MFCS3

Available

7.1.6.- STRUKTURMECHANIK

MFCS3

Gerät zur Untersuchung von Verformungen in Fachwerken

The Unit for studying Deformation of Trusses, "MFCS3", designed by EDIBON, allows the measurement of the stresses in the bars in different types of trusses, and the study of the dependence of the external force and the comparison of the...

COMPUTER CONTROLLED THERMAL RADIATION AND LIGHT RADIATION UNIT - TRTC

TRTC

Available

9.6.- WÄRMEÜBERTRAGUNG

TRTC

Gerät zur Untersuchung von Wärmestrahlung und Lichtstrahlung, computergesteuert (PC)

The Computer Controlled Thermal Radiation and Light Radiation Unit, "TRTC", has been designed to demonstrate the laws of radiant heat transfer and radiant heat exchange. It basically consists in two independent parts. One of the parts is for the...

LAMINAR FLOW VISUALIZATION AND ANALYSIS UNIT - LFA

Available

8.4.- FLUSSVISUALISIERUNG

LFA

Gerät zur Visualisierung und Analyse von laminarer Strömung

The Laminar Flow Visualization and Analysis Unit, "LFA", allows a complete study of the two-dimensional problems associated with the laminar flow by the visualization of the different models of flow, which can be observed thanks to an efficient...

HYDROGEN BUBBLE FLOW VISUALIZATION UNIT - UVF

Available

8.4.- FLUSSVISUALISIERUNG

UVF

Gerät zur Visualisierung von Strömung mit Wasserstoffblasen

The Hydrogen Bubble Flow Visualization Unit, "UVF", is a self-contained unit designed to study different flow patterns through the hydrogen bubble flow visualization technique.Bubbles are generated by electrolysis by the application of an electric...

MOBILE BED AND FLOW VISUALIZATION UNIT (WORKING SECTION: 4000X610 MM) - HVFLM-4

HVFLM-4

Available

13.1.- HYDROLOGIE UND HYDROGEOLOGIE

HVFLM-4

Gerät zur Visualisierung von Strömung und beweglichem Bett (Arbeitsbereich: 4000X610 mm)

The Mobile Bed and Flow Visualization Unit (working section: 4000 x 610 mm), "HVFLM-4", may be used mainly in two study fields. The first one is the investigation of mobile beds, which are related to water courses and civil engineering structures....

FREE AND FORCED CONVECTION HEAT TRANSFER MODULE FOR TSTCB - TXC/FFB

Zubehör von TSTCB

Available

9.6.- WÄRMEÜBERTRAGUNG

TXC/FFB

Gerät zur Wärmeübertragung durch freie und erzwungene Konvektion für TSTCB

Zubehör von TSTCB

TXC/FFB. Free and Forced Convection Heat Transfer Unit for TSTCB: study of the performance of different exchangers, analysing the heat transmission coefficients of each of the exchangers exposed to different air flows.This unit allows to study the...

FREE AND FORCED CONVECTION HEAT TRANSFER MODULE FOR TSTCC - TXC/FF

Zubehör von TSTCC

Available

9.6.- WÄRMEÜBERTRAGUNG

TXC/FF

Gerät zur Wärmeübertragung durch freie und erzwungene Konvektion für TSTCC

Zubehör von TSTCC

TXC/FF. Free and Forced Convection Heat Transfer Unit for TSTCC: study of the performance of different exchangers, analysing the heat transmission coefficients of each of the exchangers exposed to different air flows.This unit allows to study the...

DROP BALL VISCOMETER AND RESISTANCE COEFFICIENT DETERMINATION UNIT - HVB

Available

8.2.- MESSUNG

HVB

Gerät: Kugelfallviskosimeter und Bestimmung des Widerstandskoeffizienten

The Drop Ball Viscometer and Resistance Coefficient Determination Unit, "HVB", designed by EDIBON, consists of two precision transparent tubes fixed onto a frame in which a ball is allowed to drop down through different liquids. Both tubes can be...

UNIT TO STUDY A SPUR GEAR CUTAWAY MODEL - SGCM

Zubehör von CMTM

Available

7.4.1.- ABSCHNITTLICHE MODELLE

SGCM

Gerät: Schnittmodell eines geradverzahnten Getriebes

Zubehör von CMTM

The Unit to Study a Spur Gear Cutaway Model provides insight into the operation of this transmission system, characterized by teeth parallel to the axis of rotation, allowing for direct power transmission with high efficiency.This type of gear is...

UNIT TO STUDY A MITRE GEAR CUTAWAY MODEL - MGCM

Zubehör von CMTM

Available

7.4.1.- ABSCHNITTLICHE MODELLE

MGCM

Gerät: Schnittmodell eines Kegelradgetriebes

Zubehör von CMTM

The Unit to Study a Mitre Gear Cutaway Model provides a detailed study of this transmission system, composed of two conical cogwheels, designed to transmit motion between two intersecting shafts, usually positioned at a right angle.Due to their...

UNIT TO STUDY A PLANETARY GEAR CUTAWAY MODEL - PGCM

Zubehör von CMTM

Available

7.4.1.- ABSCHNITTLICHE MODELLE

PGCM

Gerät: Schnittmodell eines Planetengetriebes

Zubehör von CMTM

The Unit to Study a Planetary Gear Cutaway Model provides an in-depth analysis of this type of transmission, which consists of one or more external (planet) gears rotating around a central (sun) gear.Planetary gears are widely used in vehicle...

UNIT TO STUDY A WORM GEAR CUTAWAY MODEL - WGCM

Zubehör von CMTM

Available

7.4.1.- ABSCHNITTLICHE MODELLE

WGCM

Gerät: Schnittmodell eines Schneckengetriebes

Zubehör von CMTM

The Unit to Study a Worm Gear Cutaway Model provides insight into the operation of this transmission system, consisting of a helical worm screw and a circular cogwheel.This type of transmission is widely used in automatic doors, elevators, and...

UNIT TO STUDY A TWO-STAGE SPUR GEAR CUTAWAY MODEL - SGCM/2

Zubehör von CMTM

Available

7.4.1.- ABSCHNITTLICHE MODELLE

SGCM/2

Gerät: Schnittmodell eines zweistufigen geradverzahnten Getriebes

Zubehör von CMTM

The Unit to Study a Two-Stage Spur Gear Cutaway Model provides an in-depth analysis of these systems, which utilize two pairs of spur gears in series to achieve greater speed reduction and more efficient torque transmission.These systems are...

MESE-T

Available

7.1.2.2.- VERZAHNUNG

MESE-T

Getriebe-Studie

The Geared Study, "MESE/T", has been designed by EDIBON to dynamic study of different gears, including a standard three shaft gear train for study, which can be modified with a simple setting to obtain a simple transmission. The Gear Study,...

CUTAWAY DC COMPOUND EXCITATION MOTOR-GENERATOR - EMT4-S

EMT4-S

Available

4.4.1.- ABSCHNITTLICHE MODELLE

EMT4-S

Gleichstromgenerator mit Kompound-Erregung, Abgeschnitten

It includes a Cut away DC compound excitation motor-generator (EMT4-S) in order to study the different parts of this motor type.

CUTAWAY DC SHUNT/SERIES/COMPOUND EXCITATION MOTOR-GENERATOR - EMT5-S

EMT5-S

Available

4.4.1.- ABSCHNITTLICHE MODELLE

EMT5-S

Gleichstromgenerator mit Reihen-/Nebensch

It includes a Cut away DC shunt-series compound excitation motor (EMT5-S) in order to study the different parts of this motor type.

CUTAWAY DC SERIES EXCITATION MOTOR-GENERATOR - EMT2-S

EMT2-S

Available

4.4.1.- ABSCHNITTLICHE MODELLE

EMT2-S

Gleichstromgenerator mit Reihenerregung, Abgeschnitten

It includes a Cut away DC series excitation motor-generator (EMT2-S) in order to study the different parts of this motor type.

CUTAWAY DC INDEPENDENT EXCITATION MOTOR-GENERATOR - EMT1-S

EMT1-S

Available

4.4.1.- ABSCHNITTLICHE MODELLE

EMT1-S

Gleichstromgenerator mit unabhängiger Erregung, Gerät

It includes a Cut away DC independent excitation motor-generator (EMT1-S) in order to study the different parts of this motor type.

DIRECT CURRENT (DC) CIRCUITS KIT - M1/KIT

Zubehör von M-KITS

Available

2.2.- KITS FÜR DIE MONTAGE VON STROMKEISEN

M1/KIT

Gleichstromschaltungs-Kit (DC)

Zubehör von M-KITS

With the Direct Current (DC) Circuits Kit, "M1/KIT", designed by EDIBON, you can begin to study the basic principles of direct current.

BASIC UNIT OF MECHANICAL DRIVE SYSTEMS - MDSU

MDSU

Available

7.4.3.- INSTALLATIONS- UND WARTUNGSPRAXIS

MDSU

Grundgerät für mechanische Antriebssysteme

The Basic Unit of Mechanical Drive Systems, "MDSU", consists of a main frame where a series of accessories and elements are arranged, distributed in modules of different level, thought to introduce the user in the field of mechanical systems and...

SERVOSYSTEMS BASIC UNIT FOR DC MOTORS - SERIN/CCB

SERIN/CCB

Available

6.1.2.2.- LEISTUNGSELEKTRONIK UND INDUSTRIELLE ELEKTRONIK

SERIN/CCB

Grundgerät für Servosysteme mit DC-Motoren

The Servosystems Basic Unit for DC Motors, "SERIN/CCB", is an unit whose goal is studying low power servo systems. It is a low power DC motor speed control trainer that has a breakdown simulator.This unit is a basic version of the Computer...

THERMAL SOLAR ENERGY BASIC UNIT - MINI-EEST

MINI-EEST

Available

5.3.2.- SOLARTHERMISCHE ENERGIE

MINI-EEST

Grundgerät für Solarthermie

This unit is a system that transforms solar energy into usable thermal energy.This unit uses the thermosiphon system to heat water or the traditional pumping system. In both cases, the absorbed thermal energy is given by the simulated solar...

COMPUTER CONTROLLED THERMAL SOLAR ENERGY BASIC UNIT - MINI-EESTC

MINI-EESTC

Available

5.3.2.- SOLARTHERMISCHE ENERGIE

MINI-EESTC

Grundgerät für Solarthermie, computergesteuert (PC)

The Computer Controlled Thermal Solar Energy Basic Unit, "MINI-EESTC", allows to demonstrate solar thermal heating of domestic water in an illustrative manner.This unit is a system that transforms solar energy into usable thermal energy. It uses...

COMPUTER CONTROLLED HEAT EXCHANGERS BASIC UNIT - TICC/SS

TICC/SS

Available

9.7.- WÄRMETAUSCHER

TICC/SS

Grundgerät für Wärmetauscher, computergesteuert (PC)

The Computer Controlled Basic Heat Exchangers Unit (TICC/SS) has been designed by Edibon to study and compare different types of small-scale heat exchangers working with parallel or counterflow arrangements.The complete unit consists of two main...

MINI-EEE

Available

5.3.3.- WINDENERGIE

MINI-EEE

Grundgerät für Windenergie

The Wind Energy Basic Unit, "MINI-EEE", is a small-scale unit designed to study wind energy and the influence of some factors on its generation.This unit consists of a transparent tunnel, a wind turbine with rotor to place up to six blades and a...

FÜR WEITERE INFORMATIONEN, KONTAKTIEREN SIE UNS