Verkaufshits

577 - 612 von 950 Artikel(n)

UNIT TO STUDY GEAR TRAIN ASSEMBLY - MGTA

MGTA

Available

14.1.2.2.- VERZAHNUNG

MGTA

Gerät zur Montage von Zahnradgetrieben

The Study Gear Train Assembly Unit, "MGTA", designed by EDIBON, allows to perform diverse assemblies of gearboxes. The student will essentially learn the practice of assembling gear components in transmissions and will be introduced to the...

MSCT

Available

7.4.3.- INSTALLATIONS- UND WARTUNGSPRAXIS

MSCT

Gerät zur Prüfung von Schraubverbindungen

The Screw Joint Testing Unit, "MSCT", represents the simulation of a tightening set consisting of a screw and a nut on two rectangular shaped beams.A very precise torque wrench performs the tightening through a threaded rod and a flywheel. The...

AFT/P

Available

8.8.- FLÜSSIGKEITSLEITUNGSSYSTEM

AFT/P

Gerät zur Reibung in Rohrleitungen

The Fluid Friction in Pipes Unit, "AFT/P", is designed to determine the friction coefficient in pipes, to study the pressure losses in different types of valves and different fittings and to compare different methods to measure the flow.This unit...

AMT/P

Available

8.8.- FLÜSSIGKEITSLEITUNGSSYSTEM

AMT/P

Gerät zur Siebung in Rohrleitungen

The Mesh in Pipe Unit, "AMT/P", consists of a Pipe network, a lateral panel where all the elements to test are located and a hydraulics bench, which has all the elements and accessories required for the unit to work autonomously.The valves that...

PIPE NETWORK UNIT, WITH HYDRAULICS BENCH (FME00) - AMT

Available

8.8.- FLÜSSIGKEITSLEITUNGSSYSTEM

AMT

Gerät zur Siebung in Rohrleitungen, mit Hydraulikbank (FME00)

The Pipe Network Unit, with Hydraulics Bench (FME00), "AMT", consists of a Pipe network, a lateral panel where all the elements to test are located and a hydraulics bench, which has all the elements and accessories required for the unit to work...

COMPUTER CONTROLLED PIPE NETWORK UNIT, WITH HYDRAULICS BENCH (FME00) - AMTC

AMTC

Available

8.8.- FLÜSSIGKEITSLEITUNGSSYSTEM

AMTC

Gerät zur Siebung in Rohrleitungen, mit Hydraulikbank (FME00), Computergesteuert (PC)

The Computer Controlled Pipe Network Unit, with Hydraulics Bench (FME00), "AMTC", consists of a pipe network, a lateral panel where all the elements to test are located and a hydraulics bench, which has all the elements and accessories required...

PIPE NETWORK UNIT, WITH HYDRAULICS BENCH (FME00/B) - AMT/B

AMT/B

Available

8.8.- FLÜSSIGKEITSLEITUNGSSYSTEM

AMT/B

Gerät zur Siebung in Rohrleitungen, mit Hydraulikgruppe (FME00/B)

The Pipe Network Unit, without Hydraulics Bench (FME00), "AMT/B", consists of a Pipe network, a lateral panel where all the elements to test are located and a hydraulics bench, which has all the elements and accessories required for the unit to...

COMPUTER CONTROLLED BIOMEDICAL PATIENT BIOSIGNALS SIMULATOR - BIPBSC

BIPBSC

Available

14.3.- BIOMEDIZINISCHE AUSRÜSTUNG

BIPBSC

Gerät zur Simulation von Bio-Signalen von Patienten in der Biomedizin, computergesteuert (PC)

The Computer Controlled Biomedical Patient Bi-signals Simulator, "BIPBSC", designed by EDIBON, allows students to learn how to interpret and measure the most important biosignals: electrocardiogram (ECG), pulse oximetry (SpO₂), blood pressure...

Available

9.1.- GRUNDLAGEN UND GRUNDKONZEPTE DER THERMODYNAMIK

TMT

Gerät zur Temperaturmessung

The Temperature Measurement Unit, "TMT", works as a temperature meter that uses different temperatures measuring devices to compare, check and analyze the temperature and how is the precision for the measure and for the device that the student has...

COMPUTER CONTROLLED TEMPERATURE MEASUREMENT UNIT - TMTC

TMTC

Available

9.1.- GRUNDLAGEN UND GRUNDKONZEPTE DER THERMODYNAMIK

TMTC

Gerät zur Temperaturmessung, computergesteuert (PC)

The Computer Controlled Temperature Measurement Unit, "TMTC", designed by EDIBON, works as a temperature meter that uses different temperatures measuring devices to compare, check and analyze the temperature and how is the precision for the...

COMPUTER CONTROLLED WATER QUALITY CONTROL UNIT - PCCAC

PCCAC

Available

13.3.- ABWASSERAUFBEREITUNG

PCCAC

Gerät zur Überwachung der Wasserqualität, computergesteuert (PC)

The Computer Controlled Water Quality Control Unit, "PCCAC", has been designed to use a pump to transfer water from a feed tank to a first transparent tank equipped with an agitator and conductivity sensor. In this tank, conductivity is regulated...

COMPUTER CONTROLLED AND TOUCH SCREEN UHT UNIT - AUHT/CTS

AUHT/CTS

Available

12.2.- BEHANDLUNG VON MILCHPRODUKTEN

AUHT/CTS

Gerät zur UHT, Computergesteuert (PC) und mit Touchscreen

The Computer Controlled and Touch Screen UHT Unit, "AUHT/CTS", follows a continuous process working mode and allows either for working with large batches or a more cost-efficient operation, as the working capacity will range from a minimum of 20...

CMVAS

Available

7.1.4.- VIBRATIONEN UND OSZILLATIONEN

CMVAS

Gerät zur umfassenden Analyse mechanischer Schwingungen

The Comprehensive Mechanical Vibration Analysis Unit, "CMVAS", has been designed by EDIBON for an in-depth study of vibrations in mechanical systems, a phenomenon present in most industrial and engineering processes. These vibrations can lead to...

ACCELERATION OF GEARED SYSTEM UNIT - MAE

Available

14.1.2.2.- VERZAHNUNG

MAE

Gerät zur Untersuchung der Beschleunigung in Zahnradsystemen

The Acceleration of Geared Systems Unit, "MAE", designed by EDIBON, allows to perform tests to calculate the moment of inertia of a gear train system.The MAE unit includes six gears. Two of them can have another position in the shafts to vary the...

BRAKING AND ACCELERATING FORCES UNIT - MFF

Available

7.2.1.- BREMSEN UND KUPPLUNGEN

MFF

Gerät zur Untersuchung der Bremskraft und Beschleunigung

With the Braking and Accelerating Forces Unit, "MFF", designed by EDIBON, practices and experiments can be carried out to study the relationship between the forces involved in the braking and acceleration of a vehicle. It also allows demonstrating...

COMPUTER CONTROLLED TEACHING UNIT FOR THE STUDY OF DIGITAL SIGNAL PROCESSING - TDS

Available

14.2.1.3.- DIGITALE ELEKTRONIK

TDS

Gerät zur Untersuchung der digitalen Signalverarbeitung, computergesteuert (PC)

The Teaching Unit for the Study of Digital Signal Processing "TDS" allows to study the principles and more important concepts about digital signal processing, including study and practical exercises, among others, of:Continuous waveforms...

MPCO

Available

7.1.5.- TRIBOLOGIE (REIBUNG, TRAGUNG, SCHMIERUNG)

MPCO

Gerät zur Untersuchung der Druckverteilung in Lagern

The Journal Bearing Unit, "MPCO", designed by EDIBON, allows to study the pressure distribution in sliding bearings. It illustrates the principle of hydrodynamic lubrication.The unit is mounted on a metallic structure assembled on wheels for its...

Available

7.3.2.1.- MECHANISCHE TESTS

MDB

Gerät zur Untersuchung der Durchbiegung in gekrümmten Balken

The Deflection of Curved Bars Unit, "MDB", designed by EDIBON, consists of a structure of aluminum and steel that allows the incorporation of different curved bars to be studied. It allows tests with curved bars of different shape.The use of two...

COMPUTER CONTROLLED UNIT TO STUDY THE EFFICIENCY OF A HEATING SYSTEM - TEHSC

TEHSC

Available

9.2.- HEIZUNG, BELÜFTUNG, KLIMAANLAGE UND HEISSES WASSER

TEHSC

Gerät zur Untersuchung der Effizienz eines Heizsystems, computergesteuert (PC)

The Computer Controlled Unit to Study the Efficiency of a Heating System, "TEHSC", has been designed by EDIBON for the experimental study of closed-loop hot-water heating systems. The unit enables the analysis of the hydraulic and thermal behavior...

COMPUTER CONTROLLED CRITICAL SPEED INVESTIGATION UNIT - MVCC

MVCC

Available

7.1.4.- VIBRATIONEN UND OSZILLATIONEN

MVCC

Gerät zur Untersuchung der kritischen Geschwindigkeit, computergesteuert (PC)

Some phenomena that appear in mechanical systems, such as vibration, self-centering and resonance in rotary shafts, can be clearly demonstrated with the Computer Controlled Critical Speed Investigation Unit, "MVCC".The operation of the "MVCC" unit...

COMPUTER CONTROLLED TEACHING UNIT FOR THE STUDY OF POWER ELECTRONICS (WITH IGBTS) - TECNEL

TECNEL

Available

6.1.2.2.- LEISTUNGSELEKTRONIK UND INDUSTRIELLE ELEKTRONIK

TECNEL

Gerät zur Untersuchung der Leistungselektronik (mit IGBTs), computergesteuert (PC)

The Computer Controlled Teaching Unit for the Study of Power Electronics (with IGBTS). (Converters: AC/AC+AC/DC+DC/DC+AC/ AC), "TECNEL", designed by EDIBON, is a unit with Computer Control and Data Acquisition System designed to study the basis of...

UNIT FOR STUDYING METHODS TO DETERMINE THE ELASTIC LINE - MDLE

MDLE

Available

7.1.6.- STRUKTURMECHANIK

MDLE

Gerät zur Untersuchung der Methoden zur Bestimmung der elastischen Linie

The Unit for studying Methods to Determine the Elastic Line, "MDLE", designed by EDIBON, consists of set of beams, several supports (with clamp fixing and dial gauges, and with force gauge), a device to generate a bending moment, fixed pulleys,...

COMPUTER CONTROLLED UNIT TO STUDY WATER FLOW PRINCIPLES - WFPC

WFPC

Available

8.4.- FLUSSVISUALISIERUNG

WFPC

Gerät zur Untersuchung der Prinzipien des Wasserflusses, computergesteuert (PC)

The Computer Controlled Unit to Study Water Flow Principles, "WFPC", designed by EDIBON, is composed by both a closed and an open water circuit, thus allowing the observation of fluid's behavior in each of them. The selection of the circuit can be...

Available

7.1.5.- TRIBOLOGIE (REIBUNG, TRAGUNG, SCHMIERUNG)

MEF

Gerät zur Untersuchung der Reibung

The Friction Study Unit, "MEF", designed by EDIBON, allows the unit to illustrate the friction force by simple demonstrations.It is designed for the study of the relations between friction forces and normal forces, between hard or soft surfaces,...

UNIT FOR STUDYING BEARING FRICTION - MBF

Available

7.1.5.- TRIBOLOGIE (REIBUNG, TRAGUNG, SCHMIERUNG)

MBF

Gerät zur Untersuchung der Reibung in Lagern

The Unit for Studying Bearing Friction, "MBF", has been designed by EDIBON to study sliding friction in slide bearings and rolling bearings. Since rolling friction is very little, rotational dynamics basic tests can be performed with the inertia...

MEER

Available

7.1.4.- VIBRATIONEN UND OSZILLATIONEN

MEER

Gerät zur Untersuchung der Rotation von Wellen

The Whirling of Shafts Unit, "MEER", has been designed by EDIBON for the experimental study of rotor dynamics and the vibration phenomena associated with rotating flexible shafts. The unit allows the analysis of critical speeds, resonance...

USSB

Available

8.3.- HYDROSTATIK

USSB

Gerät zur Untersuchung der Stabilität von Schiffen

The Ship Stability Study Facility, "USSB", designed by EDIBON, is a modular unit designed for the experimental analysis of the stability, hydrostatics and behaviour of scale models of ships in floating conditions.The unit allows work with...

COMPUTER CONTROLLED THERMAL CONDUCTIVITY OF LIQUIDS AND GASES UNIT - TCLGC

TCLGC

Available

9.6.- WÄRMEÜBERTRAGUNG

TCLGC

Gerät zur Untersuchung der Wärmeleitfähigkeit (Flüssigkeit-Gas), computergesteuert (PC)

The Computer Controlled Thermal Conductivity of Liquids and Gases Unit, "TCLGC", has been designed by EDIBON to allow the students to appreciate and understand the heat transfer process through any gas or liquid locked in a solid.By the...

MFCE

Available

7.1.3.- STATIK UND DYNAMIK

MFCE

Gerät zur Untersuchung der Zentrifugalkraft

The Centrifugal Force Unit, "MFCE", designed by EDIBON, is used to demonstrate the relationship between centrifugal force, rotational speed, mass of a rotating body and distance from the axis.The unit consists of a vertical axis of rotation and a...

UNIT TO STUDY THE PRESSURE DROP OF COMPRESSIBLE FLUIDS IN PIPES - PDCFP

PDCFP

Available

8.8.- FLÜSSIGKEITSLEITUNGSSYSTEM

PDCFP

Gerät zur Untersuchung des Druckverlustes von kompressiblen Flüssigkeiten in Rohrleitungen

The Unit to Study the Pressure Drop of Compressible Fluids in Pipes, "PDCFP", allows the study of the compressible fluid pressure drop, for example the air of a compressor, and the different flow conditions (laminar and turbulent) thanks to the...

COMPUTER CONTROLLED FILTERABILITY INDEX UNIT - PEIFC

PEIFC

Available

13.1.- HYDROLOGIE UND HYDROGEOLOGIE

PEIFC

Gerät zur Untersuchung des Filterbarkeitsindex, computergesteuert (PC)

The Computer Controlled Filterability Index Unit, "PEIFC", designed by EDIBON, uses a bed of granular material, normally sand, which can be chosen by the student to suit his own purposes.The measurements taken with this unit enable a filterability...

MELH

Available

7.1.3.- STATIK UND DYNAMIK

MELH

Gerät zur Untersuchung des Hooke'schen Gesetzes

The Unit for studying Hooke's Law, "MELH", designed by EDIBON, demonstrates the application of Hooke's Law and allows the visualization of the deformation of tension springs under load and the performance of oscillation experiments on a spring –...

MFLT

Available

7.3.2.1.- MECHANISCHE TESTS

MFLT

Gerät zur Untersuchung des Knickens von Stäben

The Strut Buckling Unit "MFLT" allows the student to obtain experimentally the buckling critical load of slender struts subjected to compression.The unit allows to study the buckling of pieces of different lengths, ranging from 300 mm. to 625 mm.,...

HECA

Available

8.8.- FLÜSSIGKEITSLEITUNGSSYSTEM

HECA

Gerät zur Untersuchung des Luftstroms

The Air Flow Studies Unit, "HECA", designed by EDIBON, is a floor standing unit that allows to measure different characteristics of air distribution systems and to demonstrate certain basic principles of fluid mechanics in ducts and jets.The unit...

UNIT FOR STUDYING EQUILIBRIUM OF MOMENTS ON A TWO ARM LEVER - MEMB2

MEMB2

Available

7.1.3.- STATIK UND DYNAMIK

MEMB2

Gerät zur Untersuchung des Momentengleichgewichts an einem Zweiarmhebel

The Unit for studying Equilibrium of Moments on a Two Arm Lever, "MEMB2", has been designed by EDIBON to study the fundamentals of the equilibrium of moments and the application of the law of levers on a two-arm lever.A pivoted beam in the extreme...

Available

7.1.3.- STATIK UND DYNAMIK

SRI

Gerät zur Untersuchung des Rotations-Trägheitsmoments

The Unit to Study Rotational Inertia, "SRI", has been designed to carry out tests to analyze the moments of inertia of a solid and a hollow cylinder, both with same mass and diameter. The moment of inertia of another hollow cylinder with different...

FÜR WEITERE INFORMATIONEN, KONTAKTIEREN SIE UNS