14.- BIOMEDIZINTECHNIK

Biomedizinische Technik untersucht die Anwendung von Ingenieurwissen im Bereich der Biologie und Medizin. Die Kombination von elektronischen Steuerungs- und Instrumentierungssystemen und die Anwendung mathematischer Algorithmen sowie physikalischer und chemischer Prinzipien ermöglicht es der Biomedizintechnik, neue Techniken und Geräte zur Lösung klinischer Probleme zu erforschen und zu entwickeln. Diese Disziplin reicht vom Design diagnostischer Elemente und medizinischer Software-Tools bis hin zur physiologischen Analyse zur Untersuchung des Herzens oder des Nervensystems.

Mehr sehen

Biomedizinische Technik hat sich im Laufe der Jahre mit wissenschaftlichen und technologischen Fortschritten weiterentwickelt. Heutzutage erleichtern Geräte wie Vitaldatenüberwachungssysteme oder Diagnosegeräte die Aufgaben im Gesundheitswesen. Durch die Entwicklung von Bildanalyseverfahren wie Röntgen, Ultraschall und Magnetresonanz kann der Körper übersichtlich und schnell untersucht werden. Darüber hinaus werden Krankenhausmanagement- und Telemedizinsoftware eingesetzt.

Die Zukunft der Biomedizinischen Technik hat einen weiten Entwicklungsweg vor sich, da die heutige Gesellschaft schnelle und effiziente medizinische Lösungen benötigt. Die elektronischen Geräte, die täglich zum Einsatz kommen, ermöglichen die Fernüberwachung von Patienten, indem sie den Wert der Vitalparameter verfolgen, um die Symptome vor einem Gesundheitsproblem zu analysieren und sogar das mögliche Problem zu verhindern. Ein weiterer Trend in der Biomedizinischen Technik ist die Vereinfachung der Laborgeräte. Systeme wie Lab On a Chip (LOC) werden Laborfunktionen auf einem einzigen Chip integrieren. Neue robotergestützte Operationstechniken, neue organische Materialien für die Herstellung von künstlichen und regenerativen Geweben oder der 3D-Druck von künstlichen Organen werden die Lösung zukünftiger medizinischer Bedürfnisse ermöglichen.

Siehe Produkte
Verwandte Materialien
BIOMEDIZINTECHNIK SUBCATEGORIES

14.1.- BIOMECHANIK

Biomechanik studiert die Bewegungsmechanik des Lebewesens Organismus, darunter die Menschenkörperbewegung. Diese Studie reicht von den einfachsten Bewegungen des täglichen Lebens, wie Arbeit oder sportliche Betätigung, bis hin zur Bewegung einiger innerer Organe, wie des Herzens. Um die Kinetik...
Sehen

14.2.- BIOMEDIZINISCHE ELEKTRONIK

Biomedizinische Technik untersucht die Anwendung von Ingenieurwissen im Bereich der Biologie und Medizin. Einer der relevantesten Bereiche dieser Technik ist die biomedizinische Elektronik, in der die Konzepte der Elektronik auf die Entwicklung medizinischer Instrumente angewendet werden.Viele...
Sehen

14.3.- BIOMEDIZINISCHE AUSRÜSTUNG

Biomedizinische Ausrüstung ist das Instrumentarium, das in den Bereichen Medizin, Biologie und Pharmakologie eingesetzt wird. Das Design von biomedizinischen Geräten steht in direktem Zusammenhang mit Biomedizinischen Geräten, bei denen die Instrumente zur Gewinnung von Informationen, zur...
Sehen
BIOMEDIZINTECHNIK UNITS
73 - 108 von 181 Artikel(n)
THREE-HINGED ARCH UNIT - MART
  • MART
Available
7.1.6.- STRUKTURMECHANIK
MART
Dreigelenkbogeneinheit
The Three-Hinged Arch Unit "MART" allows the student to become familiar with three-hinged arches, to calculate the bearing forces (for point load, for uniformly distributed load and for moving load), to investigate the influence of the load on the...
TWO HINGED ARCH UNIT - MFL
  • MFL
Available
7.1.6.- STRUKTURMECHANIK
MFL
Biegegerät (zweiseitig befestigter Bogen).
The Two Hinged Arch Unit, "MFL", designed by EDIBON allows to study the response of an arched beam when an external load is applied on it.The arch is supported on two supports, a fixed one and a movable one. The displacement and horizontal...
PORTAL FRAME UNIT - MPO
  • MPO
Available
7.1.6.- STRUKTURMECHANIK
MPO
Portalrahmen.
The Portal Frame Unit, "MPO", allows to perform vertical deflection and horizontal deflection measurements in a fixed rectangular portal frames.To carry out the deflection tests, a series of loads with different weight must be applied to the...
STRESS HYPOTHESES UNIT - STH
  • STH
Available
7.1.6.- STRUKTURMECHANIK
STH
Stress Hypotheses Unit
The Stress Hypotheses Unit, "STH", allows the study and testing of stress hypotheses by applying loads in different directions on a test specimen point and measuring the deformations produced.Normal and shear stresses are applied, avoiding...
UNIT TO STUDY STRESS ON A MEMBRANE - SSM
  • SSM
Available
7.1.6.- STRUKTURMECHANIK
SSM
Unit to Study Stress on a Membrane
The Unit to Study Stress on a Membrane, "SSM", designed by EDIBON, allows the study of stresses and deformations in a thin disc or membrane subjected to different compressive stresses.The main element of the equipment is a thin disc or membrane...
UNSYMMETRICAL CANTILEVER UNIT - MVV
  • MVV
Available
7.1.6.- STRUKTURMECHANIK
MVV
Messgerät für Kragbalken.
The system consists of a vertical cantilever rigidly clamped at its lower end to the main column which is attached to a rigid structure. Beams of different sections may be used.A loading head, located at the upper end of the column, can rotate...
DEFLECTION OF CURVED BARS UNIT - MDB
  • MDB
Available
7.3.2.1.- MECHANISCHE TESTS
MDB
Gerät für die Durchbiegung bei gekrümmten Balken.
The Deflection of Curved Bars Unit "MDB" consists of a structure of aluminum and steel that allows the incorporation of different curved bars to be studied. It allows tests with curved bars of different shape.The use of two dial gauges placed...
BEAM DEFLECTION UNIT - MFV
  • MFV
Available
7.3.2.1.- MECHANISCHE TESTS
MFV
Gerät zur Strahlenablenkung.
The Beam Deflection Unit, "MFV" has been designed to enable the students to observe and study the following phenomena in simply supported beams and cantilever beams:Relation between the deflections and the applied loads.Effect of the length and...
STRUT BUCKLING UNIT - MFLT
  • MFLT
Available
7.3.2.1.- MECHANISCHE TESTS
MFLT
Maschine zur Untersuchung des Knickens von Stäben
The Strut Buckling Unit "MFLT" allows the student to obtain experimentally the buckling critical load of slender struts subjected to compression.The unit allows to study the buckling of pieces of different lengths, ranging from 300 mm. to 625 mm.,...
UNIVERSAL BUCKLING UNIT - MUP
  • MUP
Available
7.3.2.1.- MECHANISCHE TESTS
MUP
Gerät zur Belastung von Strebebalken.
The Universal Buckling Unit "MUP" is a bench-top unit whose frame is made of anodized aluminum profiles and plates and steel elements, on which a bubble level is installed to equilibrate the system.The unit has been designed to carry out tests...
SHEAR FORCE AND BENDING MOMENTUM UNIT - MMF
  • MMF
Available
7.3.2.1.- MECHANISCHE TESTS
MMF
Messgerät für die Querkraft und das Biegemoment.
The Shear Force and Bending Momentum Unit, "MMF", unit is formed by an aluminum and steel structure that allows us to perform a mechanical study of different structures.An articulated structure makes it possible to convert the application of one...
PHOTOELASTICITY UNIT - EFO
  • EFO
Available
7.3.1.- FOTOELASTIZITÄT UND STRAIN-MESSUNG
EFO
Spannungsoptik- Gerät.
Unit for photoelasticity practices, illustrating the subjects of the Photoelasticity theory, the Elasticity theory, Strength of Materials, and Structure theory.It is very suitable for the introduction and study of photoelasticity: optical...
STRAIN GAUGE TRAINING UNIT - MEGE
  • MEGE
Available
7.3.1.- FOTOELASTIZITÄT UND STRAIN-MESSUNG
MEGE
Trainingsgerät für Dehnungsmessstreifen
The Strain Gauge Training Unit, "MEGE", provides an introduction to the fundamentals of measurement with strain gauges, to compare how resistance strain gauges work and how they measure strains in different structures (torsion, tension and bending...
PHOTOELASTIC STRESS DEMONSTRATION UNIT - PSD
  • PSD
Available
7.3.1.- FOTOELASTIZITÄT UND STRAIN-MESSUNG
PSD
Photoelastic Stress Demonstration Unit
The Photoelastic Stress Demonstration Unit, "PSD", consists of a frame on which the test specimens are placed. The specimens are made of a special transparent material that has a double optical refraction effect under the action of a mechanical...
UNIVERSAL MATERIAL TESTING UNIT - EEU/20KN
  • EEU/20KN
Available
7.3.2.1.- MECHANISCHE TESTS
EEU/20KN
Testgerät für universelle Werkstoffe.
The Universal Material Testing Unit, "EEU/20KN", is a didactic bench-top universal material testing unit. It is distinguished by its rigid construction, accurate control and a precise hydraulic system to apply loads of up to 20 kN, which enables...
BRINELL HARDNESS TESTING UNIT - EEDB
  • EEDB
Available
7.3.2.1.- MECHANISCHE TESTS
EEDB
Gerät zur Prüfung der Brinellhärte.
The Brinell Hardness Testing Unit, "EEDB", is a hardness tester that determines Brinell hardness in metals, hard alloys, tempered steels, etc. Besides, it can be used with other materials, such as rigid plastics, bakelite, etc.A penetrating ball...
BRINELL, VICKERS & ROCKWELL HARDNESS TESTING UNIT - EBVR
  • EBVR
Available
7.3.2.1.- MECHANISCHE TESTS
EBVR
Brinell, Vickers und Rockwell-Härte-Testgerät
The Brinell, Vickers and Rockwell Hardness Testing Unit, "EBVR", consists of a hardness testing machine that determines the three main types of hardness (Brinell, Vickers and Rockwell). It can be adapted to determine hardness of ferrous materials...
CREEP TESTING UNIT - EEFCR
  • EEFCR
Available
7.3.2.1.- MECHANISCHE TESTS
EEFCR
Kriechversuchgerät.
The Creep Testing Unit, "EEFCR", for the creep testing is mounted on a structure of aluminum profiles which a painted steel panel is supported on.The "EEFCR" unit is designed to carry out experiments on specimens of plastic materials. Due to the...
COMPUTER CONTROLLED FATIGUE TESTING UNIT - EEFC
  • EEFC
Available
7.3.2.1.- MECHANISCHE TESTS
EEFC
Computergesteuertes Ermüdungstestgerät.
The Computer Controlled Fatigue Testing Unit, "EEFC", designed by EDIBON, allows to study the fatigue strength of the materials. For that purpose, fatigue tests are performed with different materials and notches.Optionally, with the additional...
FATIGUE TESTING UNIT - EEF
  • EEF
Available
7.3.2.1.- MECHANISCHE TESTS
EEF
Ermüdungstestgerät.
The Fatigue Testing Unit, "EEF", designed by EDIBON, allows to study the fatigue strength of the materials. For that purpose, fatigue tests are performed with different materials and notches.Optionally, with the additional recommended element Set...
CHARPY AND IZOD IMPACT TESTING UNIT - EEICI
  • EEICI
Available
7.3.2.1.- MECHANISCHE TESTS
EEICI
Gerät für den Versuch nach Charpy und Izod.
The Charpy and Izod Impact Testing Unit, "EEICI", consists of a pendulum supported on bearings with an arm of 330 mm long and a fastening system in the initial position of the test. The suitable hammer either for Charpy or Izod test is screwed to...
EULER BUCKLING MODES UNIT - MEBM
  • MEBM
Available
7.3.2.1.- MECHANISCHE TESTS
MEBM
Euler Buckling Modes Unit
With the Euler Buckling Modes Unit, "MEBM", the four Euler buckling cases are demonstrated, for which four elastic bars are fixed or supported in a frame and subjected to compression load with a system of weights.The elastic bars can be free or...
TORSION AND BEND UNIT - MTP
  • MTP
Available
7.3.2.1.- MECHANISCHE TESTS
MTP
Verdrill- und Biegemaschine.
The Torsion and Bend Unit, "MTP", is a combined apparatus for the demonstration of both torsion and bend to be used in the laboratory or as a complement of the theoretical study about torsion and bend. Its size and weight facilitate its transport...
TORSION UNIT - MTB
  • MTB
Available
7.3.2.1.- MECHANISCHE TESTS
MTB
Torsionsgerät.
The Torsion Unit, "MTB", allows to verify the basis of torsion and to perform practical exercises to demonstrate:Circular rods elastic torsion equation.The rigidity modulus of different materials.To perform the tests a metallic rod is fastened by...
TORSION TEST UNIT (30NM) - MTT
  • MTT
Available
7.3.2.1.- MECHANISCHE TESTS
MTT
Torsion Test Unit (30Nm)
To perform the tests, the test specimen is clamped and twisted by means of a flywheel and a worm gear until it breaks. The force is gradually applied to the specimen to observe the elastic strain produced. The specimen will deform and manifest...
TENSILE TESTER UNIT - MTTU
  • MTTU
Available
7.3.2.1.- MECHANISCHE TESTS
MTTU
Tensile Tester Unit
With the Tensile Tester Unit, "MTTU", tensile test can be performed. A specimen made of different materials is subjected to an increasing axial tensile stress till failure. This unit allows the user to perform tensile tests with different...
Informationen anfordern