MPO Portalrahmen.

7.1.6.- STRUKTURMECHANIK 14.1.6.- STRUKTURMECHANIK

INNOVATIVE SYSTEME

The Portal Frame Unit "MPO" allows to perform vertical deflection and horizontal deflection measurements in a fixed rectangular portal frames.

Allgemeine Beschreibung anzeigen

Katalog

Wettbewerbsspezifikationen

Erweiterungen

ICAI

Interaktive Computerunterrichtssoftware

MSAC

Modulares Erfassungs- und Steuerungssystem

Laboratorien

7TV

Mechanik-, Automobil- und Werkstofflabor für technische und berufliche Bildung

7HE

Mechanik-, Automobil- und Werkstofflabor für die Hochschulausbildung

ÄHNLICHE NEUIGKEITEN

ALLGEMEINE BESCHREIBUNG

The Portal Frame Unit "MPO" allows to perform vertical deflection and horizontal deflection measurements in a fixed rectangular portal frames. To carry out the deflection tests, a series of loads with different weight must be applied to the rectangular portal frame. If the loads are applied on the central hook a vertical deflection will be generated, whereas if they are applied on the pulley included in the unit a horizontal deflection will be generated. There are two dial gauges to measure the deflections generated.

ÜBUNGEN UND GEFÜHRTE PRAKTIKEN

GEFÜHRTE PRAKTISCHE ÜBUNGEN IM HANDBUCH ENTHALTEN

To determine the experimental value of the vertical deflectionin a point subjected to a vertical load in a rectangular portalframe.
To determine the experimental value of the horizontal deflectionin a point subjected to a horizontal load in a rectangular portalframe.
To determine the experimental value of the vertical and horizontaldeflection in two points subjected to two loads, a horizontal loadand a vertical load in a rectangular portal frame.
To compare the theoretical and experimental results.
To determine the theoretical value of the bending moments andreactions when a vertical deflection is generated.
To determine the theoretical value of the bending moments andreactions when a horizontal deflection is generated.

ERGÄNZENDE AUSRÜSTUNG

UNIT FOR STUDYING FORCES IN A JIB CRANE - MFPG

MFPG

Available

14.1.6.- STRUKTURMECHANIK

MFPG

Gerät für das Studium der Kräfte in einem Auslegerkran

The Unit for studying Forces in a Jib Crane, "MFPG", is designed to study the tensile and compressive forces in a planar central force system based on the example of a crane jib. The unit represents a planar central force system in which...

Available

14.1.6.- STRUKTURMECHANIK

MVS

Gerät für Hängebrücken.

The Suspension Bridge Unit, "MVS", consists of a deck and two parallel main cables that simulate a suspension bridge and allow the study of stress in the main cables. The deck of the bridge is simulated by a light alloy beam that is held by both...

MARP

Available

14.1.6.- STRUKTURMECHANIK

MARP

Parabolischer- Bogen- Einheit

The Parabolic Arch Unit "MARP" contains a pre-shaped articulated arch, which can be subjected to point or evenly distributed loads by means of seven uniformly distributed cables (cords) with hangers.One support of the arch is fixed whereas the...

MART

Available

14.1.6.- STRUKTURMECHANIK

MART

Dreigelenkbogeneinheit

The Three-Hinged Arch Unit "MART" allows the student to become familiar with three-hinged arches, to calculate the bearing forces (for point load, for uniformly distributed load and for moving load), to investigate the influence of the load on the...

UNIT FOR STUDYING FORCES IN A SIMPLE BAR STRUCTURE - MFBS

MFBS

Available

14.1.6.- STRUKTURMECHANIK

MFBS

Einheit zum Studieren der Kräfte in einer einfachen Sprossenstruktur

The Unit for Studying Forces in a Simple Bar Structure, "MFBS", designed by EDIBON allows the study of forces acting on a simple truss when is subjected to a point load in one of the nodes that make up the structure.It consists of a group of five...

UNIT FOR STUDYING FORCES IN DIFFERENT SINGLE PLANE TRUSSES - MFCS1

MFCS1

Available

14.1.6.- STRUKTURMECHANIK

MFCS1

Einheit zum Studieren der Kräfte bei verschiedenen planaren Fachwerken

The Unit for studying Forces in Different Single Plane Trusses, "MFCS1", allows the measurement of the bar forces in various single plane trusses, the study of the dependency on the external force and the comparison of the experimental bar forces...

UNIT FOR STUDYING FORCES IN AN OVERDETERMINATE TRUSS - MFCS2

MFCS2

Available

14.1.6.- STRUKTURMECHANIK

MFCS2

Einheit zum Studieren der Kräfte in einem überbestimmten Fachwerk

The Unit for studying Forces in an Overdeterminate Truss, "MFCS2", allows the measurement of the bar forces in a statically determinate truss and in a statically overdeterminate truss, the study of the distribution of forces in the single plane...

UNIT FOR STUDYING DEFORMATION OF TRUSSES - MFCS3

MFCS3

Available

14.1.6.- STRUKTURMECHANIK

MFCS3

Einheit zur Untersuchung der Verbiegung von Fachwerken

The Unit for studying Deformation of Trusses, "MFCS3", allows the measurement of the stresses in the bars in different types of trusses, and the study of the dependence of the external force and the comparison of the experimental forces in the...

Available

14.1.6.- STRUKTURMECHANIK

MFL

Biegegerät (zweiseitig befestigter Bogen).

The Two Hinged Arch Unit, "MFL", designed by EDIBON allows to study the response of an arched beam when an external load is applied on it.The arch is supported on two supports, a fixed one and a movable one. The displacement and horizontal...

SIMPLE STABILITY PROBLEMS STUDY UNIT - MEPE

MEPE

Available

14.1.6.- STRUKTURMECHANIK

MEPE

Gerät zur Untersuchung einfacher Stabilitätsprobleme

The Simple Stability Problems Study Unit, "MEPE", has been designed to study the stability of a bar subjected to buckling by obtaining the critical load in different configurations.The unit consists of two bars of same length connected by a...

UNIT FOR STUDYING METHODS TO DETERMINE THE ELASTIC LINE - MDLE

MDLE

Available

14.1.6.- STRUKTURMECHANIK

MDLE

Gerät sum Studieren der Methoden zur Bestimmung des elastischen linie

The Unit for studying Methods to Determine the Elastic Line, "MDLE", consists of set of beams, several supports (with clamp fixing and dial gauges, and with force gauge), a device to generate a bending moment, fixed pulleys, dial gauges and a set...

Available

14.1.5.- TRIBOLOGIE (REIBUNG, TRAGUNG, SCHMIERUNG)

MCD

Gerät für dünne Zylinder.

The Thin Cylinder Unit, "MCD", has been developed to enable the student to verify various analytical formulae with actual measured results. Strain gauges mounted in various positions and orientations on the cylinder provide an opportunity for...

QUALITÄT

KUNDENDIENST

FÜR WEITERE INFORMATIONEN, KONTAKTIEREN SIE UNS