14.- BIOMEDIZINTECHNIK

Biomedizinische Technik untersucht die Anwendung von Ingenieurwissen im Bereich der Biologie und Medizin. Die Kombination von elektronischen Steuerungs- und Instrumentierungssystemen und die Anwendung mathematischer Algorithmen sowie physikalischer und chemischer Prinzipien ermöglicht es der Biomedizintechnik, neue Techniken und Geräte zur Lösung klinischer Probleme zu erforschen und zu entwickeln. Diese Disziplin reicht vom Design diagnostischer Elemente und medizinischer Software-Tools bis hin zur physiologischen Analyse zur Untersuchung des Herzens oder des Nervensystems.

Mehr sehen

Biomedizinische Technik hat sich im Laufe der Jahre mit wissenschaftlichen und technologischen Fortschritten weiterentwickelt. Heutzutage erleichtern Geräte wie Vitaldatenüberwachungssysteme oder Diagnosegeräte die Aufgaben im Gesundheitswesen. Durch die Entwicklung von Bildanalyseverfahren wie Röntgen, Ultraschall und Magnetresonanz kann der Körper übersichtlich und schnell untersucht werden. Darüber hinaus werden Krankenhausmanagement- und Telemedizinsoftware eingesetzt.

Die Zukunft der Biomedizinischen Technik hat einen weiten Entwicklungsweg vor sich, da die heutige Gesellschaft schnelle und effiziente medizinische Lösungen benötigt. Die elektronischen Geräte, die täglich zum Einsatz kommen, ermöglichen die Fernüberwachung von Patienten, indem sie den Wert der Vitalparameter verfolgen, um die Symptome vor einem Gesundheitsproblem zu analysieren und sogar das mögliche Problem zu verhindern. Ein weiterer Trend in der Biomedizinischen Technik ist die Vereinfachung der Laborgeräte. Systeme wie Lab On a Chip (LOC) werden Laborfunktionen auf einem einzigen Chip integrieren. Neue robotergestützte Operationstechniken, neue organische Materialien für die Herstellung von künstlichen und regenerativen Geweben oder der 3D-Druck von künstlichen Organen werden die Lösung zukünftiger medizinischer Bedürfnisse ermöglichen.

Siehe Produkte
Verwandte Materialien
BIOMEDIZINTECHNIK SUBCATEGORIES

14.1.- BIOMECHANIK

Biomechanik studiert die Bewegungsmechanik des Lebewesens Organismus, darunter die Menschenkörperbewegung. Diese Studie reicht von den einfachsten Bewegungen des täglichen Lebens, wie Arbeit oder sportliche Betätigung, bis hin zur Bewegung einiger innerer Organe, wie des Herzens. Um die Kinetik...
Sehen

14.2.- BIOMEDIZINISCHE ELEKTRONIK

Biomedizinische Technik untersucht die Anwendung von Ingenieurwissen im Bereich der Biologie und Medizin. Einer der relevantesten Bereiche dieser Technik ist die biomedizinische Elektronik, in der die Konzepte der Elektronik auf die Entwicklung medizinischer Instrumente angewendet werden.Viele...
Sehen

14.3.- BIOMEDIZINISCHE AUSRÜSTUNG

Biomedizinische Ausrüstung ist das Instrumentarium, das in den Bereichen Medizin, Biologie und Pharmakologie eingesetzt wird. Das Design von biomedizinischen Geräten steht in direktem Zusammenhang mit Biomedizinischen Geräten, bei denen die Instrumente zur Gewinnung von Informationen, zur...
Sehen
BIOMEDIZINTECHNIK UNITS
25 - 48 von 181 Artikel(n)
SIMPLE DRIVES ASSEMBLY UNIT - MSDA
  • MSDA
Available
14.1.2.2.- VERZAHNUNG
MSDA
Montageausrüstung für einfache Getriebe
The Simple Drives Assembly Unit, "MSDA", allows the knowledge and learning of the fundamentals of the mechanical transmission technique, as well as the assembly, disassembly and experimentation with simple gears.The unit allows to carry out...
COMBINED DRIVES ASSEMBLY UNIT - MCDA
  • MCDA
Available
14.1.2.2.- VERZAHNUNG
MCDA
Montageausrüstung für Kombinationstransmissionen
The Combined Drives Assembly Unit, "MCDA", allows carrying out advanced exercises and provides an understanding of the significant components and arrangements of the mechanical drive technology.With this unit, practices can be carried out to...
GEAR TRAIN ASSEMBLY UNIT - MGTA
  • MGTA
Available
14.1.2.2.- VERZAHNUNG
MGTA
Montageausrüstung für Zahnradsätze
The Unit to Study Gear Train Assembly, "MGTA", allows to perform diverse assemblies of gearboxes. The student will essentially learn the practice of assembling gear components in transmissions and will be introduced to the technique of mechanical...
GEAR GENERATION UNIT - MGE
  • MGE
Available
14.1.2.2.- VERZAHNUNG
MGE
Gerät zur Zahnraderzeugung.
The Gear Generation Unit, "MGE", has been designed by EDIBON to study rack and pinion systems. With this unit the student can draw by an easy procedure the profile of a tooth, produced by the involute process of the rack when passing over the...
GEARED STUDY - MESE-T
  • MESE-T
Available
7.1.2.2.- VERZAHNUNG
MESE-T
Geared Study
The Geared Study Drive Unit, "MESE", has been designed by EDIBON to dynamic study of different gears, including a standard three shaft gear train for study, which can be modified with a simple setting to obtain a simple transmission.For the...
GEARED LIFTING UNIT - MEE
  • MEE
Available
14.1.2.2.- VERZAHNUNG
MEE
Verzahnte Hebemaschine.
The Geared Lifting Unit, "MEE", has been designed to study a simple lifting mechanism and its use to determine the speed ratio, its mechanical advantages and efficiency.The unit is mounted on a metal structure with bearings that support the gear...
UNIT FOR THE KINEMATIC STUDY OF GEAR TRAINS - KSGT
  • KSGT
Available
7.1.2.2.- VERZAHNUNG
KSGT
Unit for the Kinematic Study of Gear Trains
The Unit for the Kinematic Study of Gear Trains, "KSGT", unit includes a pivoting rail with a fixed axle to which two more axles can be fixed in any position in function of the feature to study.The cogwheels may be assembled on the axles in...
CAM ANALYSIS UNIT - MEAL
  • MEAL
Available
7.1.3.- STATIK UND DYNAMIK
MEAL
Gerät zur Nockenanalyse
The Cam Analysis Unit "MEAL" allows to observe the effect of the profile of a cam, the study of the displacement, velocity and acceleration profiles of the cam and the identification of the factors that can modify the dynamics of the cam. This...
CORIOLIS FORCE DEMONSTRATION UNIT - MDFC
  • MDFC
Available
7.1.3.- STATIK UND DYNAMIK
MDFC
Corioliskraft Demonstrationsmodell
The Coriolis Force Demonstration Unit, "MDFC", is used to observe the deflection of a jet of water generated by a pump attached to a rotating arm that rotates to different speeds in a horizontal plane. An electronically controlled motor rotates...
CENTRIFUGAL FORCE UNIT  - MFCE
  • MFCE
Available
7.1.3.- STATIK UND DYNAMIK
MFCE
Zentrifugalkrafteinheit
The Centrifugal Force Unit, "MFCE", is used to demonstrate the relationship between centrifugal force, rotational speed, mass of a rotating body and distance from the axis. The unit consists of a vertical axis of rotation and a rotating arm....
GYROSCOPE - MGI
  • MGI
Available
7.1.3.- STATIK UND DYNAMIK
MGI
Gyroskop
The Gyroscope, "MGI", allows the experimental demonstration of the different rotation modes of a gyroscope and the moments generated by the gyroscopic effect. The rotor of the electric motor (rotating motor) shares a horizontally supported shaft...
CENTRIFUGAL GOVERNOR UNIT - CGU
  • CGU
Available
7.1.3.- STATIK UND DYNAMIK
CGU
Centrifugal Governor Unit
The Centrifugal Governor Unit, "CGU", has been designed to study the operating mode of different centrifugal governors, including three interchangeable governors: Porter governor, Hartnell governor and Proell governor.Interchangeable governors...
SIMPLE BALANCING UNIT - MES
  • MES
Available
7.1.3.- STATIK UND DYNAMIK
MES
Einfaches Gleichgewichtsgerät.
The Simple Balancing Unit, "MES", developed by EDIBON is a unit to study and analyze the oscillations and vibrations and how to eliminate or diminish them.Basically, the unit is formed by a shaft mounted on bearings. The shaft is coupled by pulley...
INERTIA FLYWHEEL UNIT - MIF
  • MIF
Available
7.1.3.- STATIK UND DYNAMIK
MIF
Inertia Flywheel Unit
The Inertia Flywheel Unit, "MIF", consists of an inertia disc with a rotation shaft at the center of the disc.The shaft is supported at two points by bearings.A cord is attached by one of the ends to the shaft and wound around it. At the other end...
WHEEL AND AXLE UNIT  - MRYE1
  • MRYE1
Available
7.1.3.- STATIK UND DYNAMIK
MRYE1
Rad und Achseneinheit
The Wheel and Axle Unit, "MRYE1", is a unit which allows to investigate the mechanics of a simple wheel and axle machine and to demonstrate the laws of the formation of equilibrium of moments in static systems.Two pulleys with different diameter...
UNIT FOR STUDYING HOOKE´S LAW - MELH
  • MELH
Available
7.1.3.- STATIK UND DYNAMIK
MELH
Einheit zum Studieren des Hooksche-Gesetzes
The Unit for studying Hooke's Law, "MELH", demonstrates the application of Hooke's Law and allows the visualization of the deformation of tension springs under load and the performance of oscillation experiments on a spring – mass system.The...
WHEEL AND DIFFERENTIAL AXLE UNIT  - MRYE2
  • MRYE2
Available
7.1.3.- STATIK UND DYNAMIK
MRYE2
Rad und Differenialachsen Einheit
The Wheel and Differential Axle Unit, "MRYE2", is a unit that allows for investigating the mechanics of a wheel and differential axle mechanism and demonstrating the force reduction on a differential pulley block.A wheel, consisting of a pulley...
COMPUTER CONTROLLED TORSIONAL VIBRATION UNIT - MEVTC
  • MEVTC
Available
7.1.4.- VIBRATIONEN UND OSZILLATIONEN
MEVTC
Drehschwingungseinheit, computergesteuert
The Computer Controlled Torsional Vibration Unit, "MEVTC" is designed to study torsion suffered by some shafts with rotation motion, apart from studying the torsional rigidity and the behavior of a torsional vibration system with one, two or three...
VIBRATION OF COIL SPRING UNIT - MVRE
  • MVRE
Available
7.1.4.- VIBRATIONEN UND OSZILLATIONEN
MVRE
Vibration of Coil Spring Unit
The Vibration of Coil Spring Unit, "MVRE", unit has been designed to study and understand a coil torsion spring, a mass-spring system and the fundamental properties of its characteristic periodic motion. In this sense, the unit consists of a rigid...
FREE VIBRATION UNIT - MVL
  • MVL
Available
7.1.4.- VIBRATIONEN UND OSZILLATIONEN
MVL
Gerät für freie Schwingungen.
The Free Vibration Unit, "MVL", has been developed to cover a range of demonstrations and experiments which provide the user with an understanding of the free vibrations of a simple spring-mass-damper system. Simple adjustments can be made to the...
FREE & FORCED VIBRATION UNIT - MVLF
  • MVLF
Available
7.1.4.- VIBRATIONEN UND OSZILLATIONEN
MVLF
Gerät für freie und erzwungene Schwingungen.
The Free and Forced Vibration Unit, "MVLF", has been developed to cover a range of demonstrations and experiments which provide the user with an understanding of the free and forced vibrations of a simple spring-mass-damper system. Simple...
Informationen anfordern