14.1.- BIOMECHANIK

Biomechanik studiert die Bewegungsmechanik des Lebewesens Organismus, darunter die Menschenkörperbewegung. Diese Studie reicht von den einfachsten Bewegungen des täglichen Lebens, wie Arbeit oder sportliche Betätigung, bis hin zur Bewegung einiger innerer Organe, wie des Herzens. Um die Kinetik des menschlichen Körpers zu untersuchen, wendet Biomechanik die Prinzipien der Mechanik und das Wissen der Anatomie und der Physiologie an, die es ermöglichen, neue Diagnose- und Behandlungsinstrumente zu entwerfen und bessere Implantate und ProthesenDesigns zu entwickeln.

Mehr sehen

Heutzutage analysiert Biomechanik die Bewegungen der Kombination von Gelenken und Muskeln. Diese Analysen ermöglichen es uns, die Belastungen und Anstrengungen zu untersuchen, denen der menschliche Körper ausgesetzt ist. Die Kenntnis der Menschenkinetik ermöglicht die Behandlung von Verletzungen und deren anschließende Rehabilitation, die Konstruktion von Prothesen, die eine Bewegungsflexibilität ermöglichen, die Suche nach neuen Sporttechniken zur Steigerung der Leistungsfähigkeit einer körperlichen Aktivität oder die Vorbeugung der Verschlechterung des Organismus bei der Ausübung von Tätigkeiten am Arbeitsplatz und zu Hause. Dieses Wissen kann in mehrere Bereiche unterteilt werden: Biomechanik: Medizinische Biomechanik, Sportbiomechanik und Berufsbiomechanik. Eine weitere Anwendung der Biomechanik ist das Design von Roboteranwendungen. Die von den Roboterarmen ausgeführten Bewegungen oder die Verdrängungskapazität einiger mittels eines elektro-mechanischen Bewegungsapparates basieren auf der Mechanik von Lebewesen.

Das kontinuierliche Studium des mechanischen Verhaltens von Organismen führt dazu, dass die Biomechanikanwendungen bionische Prothesen und künstliche Organismen entwickeln, die das normale Funktionieren eines realen Organismus simulieren und auf Reize reagieren können. Darüber hinaus wird die Verbesserung der Technologie Aussenskelette die Mobilität von Menschen mit eingeschränkter Beweglichkeit erhöhen und die körperlichen Fähigkeiten bei der Ausübung von Tätigkeiten unter grosser Belastung verbessern.

Siehe Produkte
BIOMECHANIK UNITS
49 - 72 von 109 Artikel(n)
SIMPLE HARMONIC MOTION UNIT - MSHU
  • MSHU
Available
7.1.3.- STATIK UND DYNAMIK
MSHU
Simple Harmonic Motion Unit
This Simple Harmonic Motion Unit, "MSHU", allows many experiments using several pendulums and devices, such as different types of pendulums (simple, bifilar, trifilar and Kater’s pendulum) and springs.Consists of a panel with a support that allows...
UNIT TO STUDY ROTATIONAL INERTIA - SRI
  • SRI
Available
7.1.3.- STATIK UND DYNAMIK
SRI
Unit to Study Rotational Inertia
The Unit to Study Rotational Inertia, "SRI", has been designed to carry out tests to analyze the moments of inertia of a solid and a hollow cylinder, both with same mass and diameter. The moment of inertia of another hollow cylinder with different...
TORSIONAL OSCILLATIONS UNIT - MOT
  • MOT
Available
7.1.4.- VIBRATIONEN UND OSZILLATIONEN
MOT
Torsionsschwingungsgerät.
The Torsional Oscillations Unit, "MOT", is intended for easy experiments. It enables to illustrate and investigate the torsional oscillation in single rotor, multi-rotor and geared systems. The unit basically consists of a rigid frame that have...
WHIRLING OF SHAFTS UNIT - MEER
  • MEER
Available
7.1.4.- VIBRATIONEN UND OSZILLATIONEN
MEER
Gerät für Wellenwirbel
The Whirling of Shafts Unit, "MEER", has been designed by EDIBON to demonstrate and determine different modes of oscillation and resonance of shafts with continuous distribution of mass under different conditions.The operation of the Whirling of...
BELT FRICTION UNIT - MCF
  • MCF
Available
7.1.5.- TRIBOLOGIE (REIBUNG, TRAGUNG, SCHMIERUNG)
MCF
Belt Friction Unit
The Belt Friction Unit, "MCF", allows us to carry out studies and investigations to compare the driving torque for a given degree of overlap of a flat belt (leather or rope) and a V belt.With this unit the relationship between the tensions in the...
FRICTION STUDY UNIT - MEF
  • MEF
Available
7.1.5.- TRIBOLOGIE (REIBUNG, TRAGUNG, SCHMIERUNG)
MEF
Gerät zur Untersuchung der Reibkraft.
The Friction Study Unit, "MEF", allows the unit to illustrate the friction force by simple demonstrations.It is designed for the study of the relations between friction forces and normal forces, between hard or soft surfaces, between lubricated or...
JOURNAL BEARING UNIT - MPCO
  • MPCO
Available
7.1.5.- TRIBOLOGIE (REIBUNG, TRAGUNG, SCHMIERUNG)
MPCO
Gleitlagergerät
The Journal Bearing Unit, "MPCO", allows to study the pressure distribution in sliding bearings. It illustrates the principle of hydrodynamic lubrication.The unit is mounted on a metallic structure assembled on wheels for its mobility.The sliding...
TRIBOLOGY MODULAR UNIT - MEMT
  • MEMT
Available
7.1.5.- TRIBOLOGIE (REIBUNG, TRAGUNG, SCHMIERUNG)
MEMT
Tribology Modular Unit
The Tribology Modular Unit, "MEMT", consists of a base unit with electronic console and a series of experimental units to investigate and visualize tribological phenomena.MEMT-UB. Drive Unit for Tribological Tests. This unit is common for the...
DRIVE UNIT FOR TRIBOLOGICAL TESTS - MEMT-UB
Available
7.1.5.- TRIBOLOGIE (REIBUNG, TRAGUNG, SCHMIERUNG)
MEMT-UB
Drive Unit for Tribological Tests
Zubehör von MEMT
This unit is common for the modules type "MEMT". It consists of a base unit and an electronic console:The Base Unit consists of a drive unit formed by a DC motor with a shaft. The motor is mounted in a reduction gear, obtaining enough torque in...
RADIAL PRESSURE DISTRIBUTION IN A JOURNAL BEARING - MEMT-1
Available
7.1.5.- TRIBOLOGIE (REIBUNG, TRAGUNG, SCHMIERUNG)
MEMT-1
Radial Pressure Distribution in a Journal Bearing
Zubehör von MEMT
This unit allows the visualization of the radial pressure distribution in a journal bearing with hydrodynamic lubrication.The "MEMT-1" unit consists of a journal bearing with hydrodynamic lubrication, a freely moving bearing housing with thirteen...
DYNAMIC FRICTION OF A CYLINDER ON A ROLLER - MEMT-2
Available
7.1.5.- TRIBOLOGIE (REIBUNG, TRAGUNG, SCHMIERUNG)
MEMT-2
Dynamic Friction of a Cylinder on a Roller
Zubehör von MEMT
This unit allows to demonstrate the friction forces between several cylinders of different materials and a roller under different lubrication conditions.The "MEMT-2" unit consists of two levers that transmit a force applied by weights to a test...
DYNAMIC FRICTION OF A PIN ON A DISC - MEMT-3
Available
7.1.5.- TRIBOLOGIE (REIBUNG, TRAGUNG, SCHMIERUNG)
MEMT-3
Dynamic Friction of a Pin on a Disc
Zubehör von MEMT
This unit allows to study the friction forces between several vertical friction pins of different materials and a rotating friction disc.The end of each vertical pin is made of a different material and rubs against the rotating steel disc. The...
ROLLING FRICTION IN WHEELS - MEMT-4
Available
7.1.5.- TRIBOLOGIE (REIBUNG, TRAGUNG, SCHMIERUNG)
MEMT-4
Rolling Friction in Wheels
Zubehör von MEMT
This module allows to determine the slip forces between two rotating friction discs in contact.The slip between the discs is maintained constant by a gearbox. The pressure can be adjusted with a lever and a set of weights. The unit includes a...
ELASTOHYDRODYNAMIC LUBRICATION - MEMT-5
Available
7.1.5.- TRIBOLOGIE (REIBUNG, TRAGUNG, SCHMIERUNG)
MEMT-5
Elastohydrodynamic Lubrication
Zubehör von MEMT
This unit allows to investigate the thickness and characteristics of a lubricant film on a rolling sphere.The unit consists in a steel sphere and a driven glass disc.The sphere is pressed against the underside of the glass disc. The light from a...
FRICTION VIBRATION - MEMT-6
Available
7.1.5.- TRIBOLOGIE (REIBUNG, TRAGUNG, SCHMIERUNG)
MEMT-6
Friction Vibration
Zubehör von MEMT
This module allows to demonstrate the static friction, the sliding friction, the related friction vibrations and the slip-stick effects.Several weights are placed on a horizontally rotating friction disc. It is prevented from turning by a cord....
THIN CYLINDER UNIT - MCD
  • MCD
Available
7.1.5.- TRIBOLOGIE (REIBUNG, TRAGUNG, SCHMIERUNG)
MCD
Gerät für dünne Zylinder.
The Thin Cylinder Unit, "MCD", has been developed to enable the student to verify various analytical formulae with actual measured results. Strain gauges mounted in various positions and orientations on the cylinder provide an opportunity for...
UNIT FOR STUDYING BEARING FRICTION - MBF
  • MBF
Available
7.1.5.- TRIBOLOGIE (REIBUNG, TRAGUNG, SCHMIERUNG)
MBF
Unit for Studying Bearing Friction
The Unit for Studying Bearing Friction, "MBF", has been designed by EDIBON to study sliding friction in slide bearings and rolling bearings. Since rolling friction is very little, rotational dynamics basic tests can be performed with the inertia...
BELT FRICTION UNIT WITH DYNAMOMETERS - MCF/A
  • MCF/A
Available
7.1.5.- TRIBOLOGIE (REIBUNG, TRAGUNG, SCHMIERUNG)
MCF/A
Belt Friction Unit with Dynamometers
The Belt Friction Unit with Dynamometers, "MCF/A", allows studies and investigations to compare the friction coefficient for a given contact angle of a flat belt and a V-belt.With this unit it is possible to observe the relationship between...
THICK WALLED CYLINDER UNIT - MCPG
  • MCPG
Available
7.1.6.- STRUKTURMECHANIK
MCPG
Thick Walled Cylinder Unit
In the Thick-Walled Cylinder Unit, "MCPG", the stresses are determined through the measurement of the strains produced on the surface. These strains are measured by strain gauges.The thick-walled vessel consists of an aluminum cylinder of length...
SUSPENSION BRIDGE UNIT - MVS
  • MVS
Available
7.1.6.- STRUKTURMECHANIK
MVS
Gerät für Hängebrücken.
The Suspension Bridge Unit, "MVS", consists of a deck and two parallel main cables that simulate a suspension bridge and allow the study of stress in the main cables. The deck of the bridge is simulated by a light alloy beam that is held by both...
PARABOLIC ARCH UNIT - MARP
  • MARP
Available
7.1.6.- STRUKTURMECHANIK
MARP
Parabolischer- Bogen- Einheit
The Parabolic Arch Unit "MARP" contains a pre-shaped articulated arch, which can be subjected to point or evenly distributed loads by means of seven uniformly distributed cables (cords) with hangers.One support of the arch is fixed whereas the...
THREE-HINGED ARCH UNIT - MART
  • MART
Available
7.1.6.- STRUKTURMECHANIK
MART
Dreigelenkbogeneinheit
The Three-Hinged Arch Unit "MART" allows the student to become familiar with three-hinged arches, to calculate the bearing forces (for point load, for uniformly distributed load and for moving load), to investigate the influence of the load on the...
Informationen anfordern