BS2-PLC Temperature Test Module for PLC

TEMPERATURE TEST MODULE FOR PLC - BS2-PLC

創新系統

The "PLC-BS2" has been designed to study the use and applications of temperature sensors as a measure device and how to perform a temperature control through a PLC.

查看一般說明

一般說明

The "PLC-BS2" has been designed to study the use and applications of temperature sensors as a measure device and how to perform a temperature control through a PLC. The unit is equipped with a half-open space in whose interior there are one lamp that heat the inside of the module and a series of temperature sensors of different technologies placed in different positions. One of the temperature sensors output signal is conditioned to be connected to the PLC. The temperature inside the module can be controlled by the PLC, depending on the signal obtained from the temperature sensor.

* Available PLC models of different manufacturers: PANASONIC, SIEMENS, OMRON, MITSUBISHI, ALLEN BRADLEY, etc.

練習和指導練習

手册中包含的指导实践练习

  1. How to use the Curie effect as application of a high temperature thermostatic controller.
  2. Adjustable bimetallic thermostat. To use the bimetallic thermostat as a temperature controller, calculating its hysteresis.
  3. Adjustable bimetallic thermostat. How we can reduce the hysteresis by adding a resistor to the heating circuit.
  4. To use the thermostat based on a bimetallic sensor to control the temperature.
  5. To use the capillary thermostat.
  6. Using the analog inputs and outputs of the PLC to read and write analog signals.
  7. Read the temperature sensor signal with the PLC.
  8. Manual control of the actuator through the PLC.
  9. PID control of the temperature value through the PLC.
  10. Observe the effects of the temperature control to changes in the PID parameters.

包含物品

質量

售後服務

要求信息