MPO 门式钢架结构测试装置

創新系統

The Portal Frame Unit, "MPO", allows to perform vertical deflection and horizontal deflection measurements in a fixed rectangular portal frames.

查看一般說明

比赛规格

扩展

ICAI

Interactive Computer Aided Instruction Software

MSAC

Modular System for Acquisition and Control

化验室

一般說明

The Portal Frame Unit, "MPO", allows to perform vertical deflection and horizontal deflection measurements in a fixed rectangular portal frames.

To carry out the deflection tests, a series of loads with different weight must be applied to the rectangular portal frame. If the loads are applied on the central hook a vertical deflection will be generated, whereas if they are applied on the pulley included in the unit a horizontal deflection will be generated.

There are two dial gauges to measure the deflections generated.

練習和指導練習

手册中包含的指导实践练习

To determine the experimental value of the vertical deflection in a point subjected to a vertical load in a rectangular portal frame.
To determine the experimental value of the horizontal deflection in a point subjected to a horizontal load in a rectangular portal frame.
To determine the experimental value of the vertical and horizontal deflection in two points subjected to two loads, a horizontal load and a vertical load in a rectangular portal frame.
To compare the theoretical and experimental results.
To determine the theoretical value of the bending moments and reactions when a vertical deflection is generated.
To determine the theoretical value of the bending moments and reactions when a horizontal deflection is generated.

配套设备

UNIT FOR STUDYING FORCES IN A JIB CRANE - MFPG

MFPG

Available

7.1.6.- 结构力学

MFPG

Unit for studying Forces in a Jib Crane

The Unit for studying Forces in a Jib Crane, "MFPG", is designed to study the tensile and compressive forces in a planar central force system based on the example of a crane jib.The unit represents a planar central force system in which multiple...

Available

14.1.6.- 结构力学

MVS

悬索桥测试设备

The Suspension Bridge Unit, "MVS", consists of a deck and two parallel main cables that simulate a suspension bridge and allow the study of stress in the main cables. The deck of the bridge is simulated by a light alloy beam that is held by both...

MARP

Available

14.1.6.- 结构力学

MARP

抛物线拱单元

The Parabolic Arch Unit "MARP" contains a pre-shaped articulated arch, which can be subjected to point or evenly distributed loads by means of seven uniformly distributed cables (cords) with hangers.One support of the arch is fixed whereas the...

MART

Available

14.1.6.- 结构力学

MART

三铰链弧单元

The Three-Hinged Arch Unit “MART” allows the student to become familiar with three-hinged arches, to calculate the bearing forces (for point load, for uniformly distributed load and for moving load), to investigate the influence of the load on the...

UNIT FOR STUDYING FORCES IN A SIMPLE BAR STRUCTURE - MFBS

MFBS

Available

7.1.6.- 结构力学

MFBS

Unit for studying Forces in a Simple Bar Structure

The Unit for Studying Forces in a Simple Bar Structure, "MFBS", designed by EDIBON allows the study of forces acting on a simple truss when is subjected to a point load in one of the nodes that make up the structure.It consists of a group of five...

UNIT FOR STUDYING FORCES IN DIFFERENT SINGLE PLANE TRUSSES - MFCS1

MFCS1

Available

7.1.6.- 结构力学

MFCS1

通过不同平面杆架学习力学的设备

The Unit for studying Forces in Different Single Plane Trusses, "MFCS1", allows the measurement of the bar forces in various single plane trusses, the study of the dependency on the external force and the comparison of the experimental bar forces...

UNIT FOR STUDYING FORCES IN AN OVERDETERMINATE TRUSS - MFCS2

MFCS2

Available

7.1.6.- 结构力学

MFCS2

通过超定杆架学习力学的设备

The Unit for studying Forces in an Overdeterminate Truss, "MFCS2", allows the measurement of the bar forces in a statically determinate truss and in a statically overdeterminate truss, the study of the distribution of forces in the single plane...

UNIT FOR STUDYING DEFORMATION OF TRUSSES - MFCS3

MFCS3

Available

7.1.6.- 结构力学

MFCS3

学习杆架变形的设备

The Unit for studying Deformation of Trusses, "MFCS3", allows the measurement of the stresses in the bars in different types of trusses, and the study of the dependence of the external force and the comparison of the experimental forces in the...

MCPG

Available

7.1.6.- 结构力学

MCPG

Thick Walled Cylinder Unit

In the Thick-Walled Cylinder Unit, "MCPG", the stresses are determined through the measurement of the strains produced on the surface. These strains are measured by strain gauges.The thick-walled vessel consists of an aluminum cylinder of length...

Available

14.1.6.- 结构力学

MFL

双铰接拱设备

The Two Hinged Arch Unit, "MFL", designed by EDIBON allows to study the response of an arched beam when an external load is applied on it.The arch is supported on two supports, a fixed one and a movable one. The displacement and horizontal...

Available

7.1.6.- 结构力学

STH

Stress Hypotheses Unit

The Stress Hypotheses Unit, "STH", allows the study and testing of stress hypotheses by applying loads in different directions on a test specimen point and measuring the deformations produced.Normal and shear stresses are applied, avoiding...

SIMPLE STABILITY PROBLEMS STUDY UNIT - MEPE

MEPE

Available

7.1.6.- 结构力学

MEPE

稳定性学习设备

The Simple Stability Problems Study Unit, "MEPE", has been designed to study the stability of a bar subjected to buckling by obtaining the critical load in different configurations.The unit consists of two bars of same length connected by a...

質量

售後服務

如需更多信息，请联系我们

MPO 门式钢架结构测试装置

創新系統

扩展

化验室

相關新聞

一般說明

練習和指導練習

手册中包含的指导实践练习

配套设备

質量

售後服務