Today we are at the beginning of a new era, named ‘Industrie 4.0’. Let´s explain a little further the concept "Industrie 4.0"!
AEL-CM2 异步电机起动器和手动转速开关应用
創新系統
The Application of Manual Starters and Velocity Commutators with Asynchronous Motors, "AEL-CM2 ", has been designed by EDIBON to study how Dahlander and Three-Phase Induction Motor with Wound Rotor are wired and controlled.
相關新聞
一般說明
The Application of Manual Starters and Velocity Commutators with Asynchronous Motors, "AEL-CM2 ", has been designed by EDIBON to study how Dahlander and Three-Phase Induction Motor with Wound Rotor are wired and controlled. Besides, this application shows the most important methods of motor operations used in the industry, such as changing the rotation direction, manual star-delta starter, direct starter, direct starter with inversion, manual Dahlander commutator, starting with resistors, etc.
This application includes a series of elements which allow study in depth all issues mentioned before.
In addition, this application has a flywheel with the purpose of simulate a dynamic load in the motors and to check how they work in this situation.
練習和指導練習
手册中包含的指导实践练习
- Checking the working of the main power supply.
- Manual Star-Delta starter of asynchronous three-phase induction motor with wound rotor.
- Manual start and reverse operation of asynchronous three-phase induction motor with wound rotor.
- Manual Star-Delta with inversion circuit of asynchronous three-phase induction motor with wound rotor.
- Manual soft starter with resistors of asynchronous three-phase induction motor with wound rotor.
- Manual start and reverse operation of Dahlander motor.
- Manual speed variation of a Dahlander motor.
- Manual speed variation of a Dahlander motor with inversion.
可用的类似设备
4.1.2.1.- 驱动和操纵控制
AEL-CM1
The Logical Control Operations Application, "AEL-CM1", has been designed by EDIBON to study basic logics operations using timers, push-button, signaling lamps, contactors, thermal relays and combinations of them used in the industrial world.This...
4.1.2.1.- 驱动和操纵控制
AEL-CM3
自动控制操作应用 II
The Automatic Control Operations II Application, "AEL-CM3", has been designed by EDIBON to study automatic operations with Three- Phase Induction Motors of Squirrel Cage.The student will learn how carry out logic wirings with several relays,...
4.1.2.1.- 驱动和操纵控制
AEL-CM4
带触点器和传感器的自动控制操作应用 IV
The Automatic Control Operations with Contactors and Sensors IV Application, "AEL-CM4", has been designed by EDIBON for the study of automatic control operations with contactors and sensors connected to a load (induction motors, conveyor belts,...
配套设备
4.1.2.1.- 驱动和操纵控制
AEL-CM1
逻辑控制操作应用
The Logical Control Operations Application, "AEL-CM1", has been designed by EDIBON to study basic logics operations using timers, push-button, signaling lamps, contactors, thermal relays and combinations of them used in the industrial world.This...
4.1.2.1.- 驱动和操纵控制
AEL-CM3
自动控制操作应用 II
The Automatic Control Operations II Application, "AEL-CM3", has been designed by EDIBON to study automatic operations with Three- Phase Induction Motors of Squirrel Cage.The student will learn how carry out logic wirings with several relays,...
4.1.2.1.- 驱动和操纵控制
AEL-CM4
带触点器和传感器的自动控制操作应用 IV
The Automatic Control Operations with Contactors and Sensors IV Application, "AEL-CM4", has been designed by EDIBON for the study of automatic control operations with contactors and sensors connected to a load (induction motors, conveyor belts,...
4.1.2.1.- 驱动和操纵控制
AEL-MED
工业装置监测应用
The Industrial Installations Monitoring Application, "AEL-MED", has been designed by EDIBON with the objective of introducing the consumption supervision of industrial installations. For that, the application contains the next modules: a main...
4.1.2.1.- 驱动和操纵控制
AEL-AI13-A
电气工程应用(RLC电路)
The Electrotechnics Application focused on RLC Circuits, "AEL-AI13-A", is designed with the aim to understand the working and the purposes of RLC circuits. For that, this application have a set of resistors, inductances and capacitors with...