Verkaufshits

793 - 828 von 927 Artikel(n)

COMPUTER CONTROLLED PLATE AND FRAME FILTER PRESS - AFPMC

AFPMC

Available

11.1.11.- FILTRATION, SEDIMENTATION AND MIXING

AFPMC

Platten- und Rahmenfilterpresse, computergesteuert (PC)

The Computer Controlled Plate and Frame Filter Press, "AFPMC", has been designed to study the filtration and clarification processes using a filter press in which the number of frames and the type of filter cloths can change.A suspension is...

COMPUTER CONTROLLED CONTACT PLATE FREEZER - TPCC

TPCC

Available

12.1.- LEBENSMITTELTECHNIK

TPCC

Plattengefriergerät, computergesteuert (PC)

The Computer Controlled Contact Plate Freezer, "TPCC", allow the student to freeze food products quickly by using an industrial freezing process. The unit includes a compression refrigeration circuit. It is based on mechanically forcing the...

Zubehör von TICC

Available

9.7.- WÄRMETAUSCHER

TIPL

Plattenwärmetauscher für TICC

Zubehör von TICC

The Plate Heat Exchanger for TICC, "TIPL", designed by EDIBON, allows the study of heat transfer between hot and cold water flowing through alternate channels formed between parallel plates. This unit enables the analysis of how heat transfer...

PNEUMATIC HANDLING AND CONVEYOR BELT - AE-PLC-MACT

AE-PLC-MACT

Available

6.2.5.4.- TEILHANDHABUNG VON ARBEITSPLATZANWENDUNGEN

AE-PLC-MACT

Pneumatische Lernfabrik zur Handhabung und Förderband

The Pneumatic Handling and Conveyor Belt, "AE-PLC-MACT", is an automatic handling station with a conveyor system commanded by a PLC. The "AE-PLC-MACT" is composed of a pneumatic handling system that uses vacuum technology to move pieces from the...

PRACTICAL CASTING KIT: MODELING AND SAND CASTING OF HOLLOW PARTS - MCLA

MCLA

Available

7.3.3.1.- GIESSEREI

MCLA

Praktisches Gießset: Modellieren und Gießen von Hohlteilen in Sandformen

The Practical Casting Kit: Modeling and Sand Casting of Hollow Parts, "MCLA", developed by EDIBON, is an essential educational tool for teaching the fundamentals of casting. This kit allows students to develop practical skills in molding and...

PRACTICAL CASTING KIT: MODELING AND SAND CASTING OF SOLID PARTS - MCAM

MCAM

Available

7.3.3.1.- GIESSEREI

MCAM

Praktisches Gießset: Modellieren und Gießen von Massivteilen in Sandformen

The Practical Casting Kit: Modeling and Sand Casting of Solid Parts, "MCAM", developed by EDIBON, is an essential educational tool for teaching the fundamentals of casting. This kit allows students to develop practical skills in molding and...

PRACTICAL CASTING KIT: CENTRIFUGAL CASTING - MCEN

MCEN

Available

7.3.3.1.- GIESSEREI

MCEN

Praktisches Gießset: Zentrifugalguss

The Practical Casting Kit: Centrifugal Casting, "MCEN", designed by EDIBON, is an essential educational unit for teaching the fundamentals of centrifugal casting. This unit enables students to develop practical skills in centrifugal casting...

FLOW, LEVEL, PRESSURE AND TEMPERATURE REGULATION FOR PROCESS CONTROL - FLPTU

FLPTU

Available

10.3.- INDUSTRIELLE ANWENDUNGEN UND SYSTEME

FLPTU

Prozessregelung zur Regulierung von Durchfluss, Füllstand, Druck und Temperatur

The "FLPTU", designed by EDIBON, allows the student to configure a flow, level, pressure and temperature control system, apart from studying the fundamentals of the control engineering on which they are based.The "FLPTU" unit consists of a hot...

COMPUTER CONTROLLED PROCESS CONTROL UNIT (ELECTRONIC + PNEUMATIC VALVE AND SPEED CONTROLLER) - UCPCNCV

UCPCNCV

Available

6.1.1.3.- INDUSTRIELLE SYSTEMANWENDUNGEN

UCPCNCV

Prozesssteuerung (elektrisches + pneumatisches Ventil und Frequenzumrichter), computergesteuert (PC)

The Computer Controlled Process Control System (with electronic control valve + pneumatic control valve + variable speed drive), "UCPCNCV", designed by EDIBON, allows the study of several types of automatic control and can be used to control...

COMPUTER CONTROLLED PROCESS CONTROL (ELECTRONIC VALVE) - UCP

Available

6.1.1.3.- INDUSTRIELLE SYSTEMANWENDUNGEN

UCP

Prozesssteuerung (elektronisches Ventil), computergesteuert (PC)

The Computer Controlled Process Control (Electronic Valve), "UCP", designed by EDIBON, allows the study of several types of automatic control and can be used to control different variables (flow, level, temperature, pressure, pH, conductivity and...

COMPUTER CONTROLLED PROCESS CONTROL (SPEED CONTROLLER) - UCPCV

UCPCV

Available

6.1.1.3.- INDUSTRIELLE SYSTEMANWENDUNGEN

UCPCV

Prozesssteuerung (Frequenzumrichter), computergesteuert (PC)

The Computer Controlled Process Control Unit (Speed Controller), "UCPCV", designed by EDIBON, allows the study of several types of automatic control and can be used to control different variables (flow, level, temperature, pressure, pH,...

COMPUTER CONTROLLED PROCESS CONTROL (PNEUMATIC VALVE) - UCPCN

UCPCN

Available

6.1.1.3.- INDUSTRIELLE SYSTEMANWENDUNGEN

UCPCN

Prozesssteuerung (pneumatisches Ventil), computergesteuert (PC)

The Computer Controlled Process Control (Pneumatic Valve), "UCPCN", designed by EDIBON, allows the study of several types of automatic control and can be used to control different variables (flow, level, temperature, pressure, pH, conductivity and...

Available

10.3.- INDUSTRIELLE ANWENDUNGEN UND SYSTEME

APC

Prozesssteuerungsanwendungen

The Applications for Process Control, "APC", designed by EDIBON, allows the student to design, assemble and configure various control systems, apart from studying the fundamentals of the control engineering on which they are based.These...

COMPUTER CONTROLLED MULTIPUMP TESTING BENCH (4 TYPES OF PUMPS) - PBOC

PBOC

Available

8.7.1.- PUMPS

PBOC

Prüfstand für Mehrfachpumpen (4 Pumpentypen), computergesteuert (PC)

The Computer Controlled Multipump Testing Bench (4 types of pumps), "PBOC", designed by EDIBON, allows the students to study the operating characteristics of several types of pumps. This unit allows to control and to measure the most...

COMPUTER CONTROLLED TEST BENCH FOR SINGLE-CYLINDER AND TWO-CYLINDERS ENGINES, 11 KW - TBMC12

TBMC12

Available

7.2.3.- MOTOREN

TBMC12

Prüfstand für Motoren mit 11 kW, computergesteuert (PC)

The Computer Controlled Test Bench for Single-Cylinder and Two-Cylinders Engines, 11 kW, "TBMC12", designed by EDIBON, is a teaching unit to test internal combustion engines of up to 11 kW.The element of the unit that offers load torque is an eddy...

COMPUTER CONTROLLED TEST BENCH FOR SINGLE-CYLINDER ENGINES, 2.2 KW - TBMC3

TBMC3

Available

7.2.3.- MOTOREN

TBMC3

Prüfstand für Motoren mit 2,2 kW, computergesteuert (PC)

The Computer Controlled Test Bench for Single-Cylinder Engines, 2.2 kW, "TBMC3", designed by EDIBON, is a teaching unit to test internal combustion engines of up to 2.2 kW.The unit has an element to exert the braking torque, an asynchronous motor...

COMPUTER CONTROLLED TEST BENCH FOR SINGLE-CYLINDER ENGINES, 7.5 KW - TBMC8

TBMC8

Available

7.2.3.- MOTOREN

TBMC8

Prüfstand für Motoren mit 7,5 kW, computergesteuert (PC)

The Computer Controlled Test Bench for Single-Cylinder Engines, 7.5 kW, "TBMC8", designed by EDIBON, is a teaching unit to test internal combustion engines of up to 7.5 kW.The element of the unit that offers load torque is an eddy current...

COMPUTER CONTROLLED TEST BENCH FOR FOUR-CYLINDERS ENGINES, 75 KW - TBMC75

TBMC75

Available

7.2.3.- MOTOREN

TBMC75

Prüfstand für Motoren mit 75 kW, computergesteuert (PC)

The Computer Controlled Test Bench for Four Cylinders Engines, 75 kW, "TBMC75", designed by EDIBON, is a teaching unit to test internal combustion engines of up to 75 kW.The element of the unit that offers load torque is an eddy current...

PBSPB

Available

8.7.1.- PUMPS

PBSPB

Prüfstand für Pumpen in Serie/Parallel

The Series/Parallel Pumps Bench, "PBSPB", has been designed by EDIBON to demonstrate the operational advantages of parallel or series operation, depending on the required duty.This unit consists of two centrifugal pumps, a feed water tank,...

COMPUTER CONTROLLED SERIES/PARALLEL PUMPS BENCH - PBSPC

PBSPC

Available

8.7.1.- PUMPS

PBSPC

Prüfstand für Pumpen in Serie/Parallel, computergesteuert (PC)

The Computer Controlled Series/Parallel Pumps Bench, "PBSPC", has been designed by EDIBON to demonstrate the operational advantages of parallel or series operation, depending on the required duty.This unit consists of two centrifugal pumps, a feed...

RADIAL PRESSURE DISTRIBUTION IN A JOURNAL BEARING - MEMT-1

Zubehör von MEMT

Available

7.1.5.- TRIBOLOGIE (REIBUNG, TRAGUNG, SCHMIERUNG)

MEMT-1

Radiale Druckverteilung in einem Gleitlager

Zubehör von MEMT

This unit allows the visualization of the radial pressure distribution in a journal bearing with hydrodynamic lubrication.The "MEMT-1" unit consists of a journal bearing with hydrodynamic lubrication, a freely moving bearing housing with thirteen...

COMPUTER CONTROLLED RADIAL FLOW TURBINE - TFRC

TFRC

Available

5.3.6.- HYDRAULISCHE ENERGIE

TFRC

Radialturbine, computergesteuert (PC)

The Computer Controlled Radial Flow Turbine, "TFRC", consists of a small-scale radial flow turbine with two nozzles at 90 degrees to the perpendicular direction of the axis of rotation.In order to raise the fluid, it has a computer controlled pump...

N-EM-CR

Available

6.2.2.1.- HERSTELLUNGSSYSTEME

N-EM-CR

Reaktorsteuerung

The "N-EM" are a series of emulators that provide the students the required hardware to emulate the most common automatic systems.The "N-EM" modules are designed to work with the "AE-PLC" units to obtain the fundamental knowledge of PLC...

RAINFALL SIMULATOR FOR SOIL EROSION STUDIES - RSES

RSES

Available

13.1.- HYDROLOGIE UND HYDROGEOLOGIE

RSES

Regensimulator für Bodenerosionsstudien

The Rainfall Simulator for Soil Erosion Studies, "RSES", consists of a metal frame that can be placed directly on the ground for direct field studies or used with its various accessories for laboratory tests. The whole structure is covered with a...

COMPUTER CONTROLLED RAINFALL SIMULATOR FOR SOIL EROSION STUDIES - RSESC

RSESC

Available

13.1.- HYDROLOGIE UND HYDROGEOLOGIE

RSESC

Regensimulator für Bodenerosionsstudien, computergesteuert (PC)

The Computer Controlled Rainfall Simulator for Soil Erosion Studies, "RSESC", consists of a metal frame that can be placed directly on the ground for direct studies or used with its different accessories for laboratory tests.The entire frame is...

SHELL & TUBE HEAT EXCHANGER FOR TICB - TICTB

Zubehör von TICB

Available

9.7.- WÄRMETAUSCHER

TICTB

Rohr-in-Mantel-Wärmetauscher für TICB

Zubehör von TICB

The Shell and Tube Heat Exchanger for TICB, "TICTB", designed by EDIBON, provides a comprehensive environment for the study of heat transfer. It allows analysis of the overall energy balance, heat losses in parallel and counterflow configurations,...

SHELL & TUBE HEAT EXCHANGER FOR TICC - TICT

Zubehör von TICC

Available

9.7.- WÄRMETAUSCHER

TICT

Rohr-in-Mantel-Wärmetauscher für TICC

Zubehör von TICC

The Shell and Tube Heat Exchanger for TICC, "TICT", designed by EDIBON, provides a comprehensive environment for the study of heat transfer. It allows analysis of the overall energy balance, heat losses in parallel and counterflow configurations,...

Zubehör von MEMT

Available

7.1.5.- TRIBOLOGIE (REIBUNG, TRAGUNG, SCHMIERUNG)

MEMT-4

Rollreibung bei Rädern

Zubehör von MEMT

This module allows to determine the slip forces between two rotating friction discs in contact.The slip between the discs is maintained constant by a gearbox. The pressure can be adjusted with a lever and a set of weights. The unit includes a...

Zubehör von QRQC

Available

11.2.- CHEMISCHE REAKTOREN

QRSA

Rührkesselreaktoren in Serie

Zubehör von QRQC

The Series Stirred Reactors, "QRSA", designed by EDIBON, provide the ability to investigate the kinetics of liquid-liquid homogeneous reactions and conduct experiments with multiple reactors in series. This configuration allows the outlet flow of...

COMPUTER CONTROLLED DISC CENTRIFUGE - QCDIC

QCDIC

Available

11.1.11.- FILTRATION, SEDIMENTATION AND MIXING

QCDIC

Scheibenzentrifuge, computergesteuert (PC)

The Computer Controlled Disc Centrifuge, "QCDIC", allows the study of the separation of emulsions by centrifugation. In order to make the unit work, two immiscible liquids are poured into the agitation tank, such as water and oil. In this deposit...

INCLINED MULTIMANOMETER WITH 20 MANOMETRIC TUBES OF 250 MM LENGTH - HMM-I1000

Zubehör von HMM

Available

8.2.- MESSUNG

HMM-I1000

Schräg-Multimanometer mit 20 Messröhren, 250 mm Länge

Zubehör von HMM

The Inclined Multimanometer with 20 manometric tubes of 250 mm length, "HMM-I1000," designed by EDIBON, allows measuring and comparing pressures at different points or fluids simultaneously.This facilitates the detailed analysis of pressure...

N-EM-MPP

Available

6.2.2.4.- STEUERUNG VON ELEKTRISCHEN MASCHINEN

N-EM-MPP

Schrittsteuerung für den Motor

Available

7.1.2.1.- MECHANISMEN

MBD

Schubkurbelgetriebe

The Slider Crank Mechanism, "MBD", designed by EDIBON, is an example of slider-crank mechanism.This mechanism is made of aluminum and consists of a rotary element (graduated disc), called crank, connected to a rigid bar, calledconnecting rod. When...

FÜR WEITERE INFORMATIONEN, KONTAKTIEREN SIE UNS