Verkaufshits
685 - 720 von 921 Artikel(n)
DRILLING WORKSTATION - AE-PLC-ST
  • AE-PLC-ST
Available
6.2.5.2.- PROCESS WORKSTATION-ANWENDUNGEN
AE-PLC-ST
Lernfabrik zum Bohren
The "AE-PLC-ST" is an automatic drilling workstation commanded by a PLC. The "AE-PLC-ST" also include a conveyor system to transport the incoming pieces to the drilling zone where the drilling machine simulate the process.The "AE-PLC-ST"...
MOUNTING WORKSTATION - AE-PLC-M
  • AE-PLC-M
Available
6.2.5.2.- PROCESS WORKSTATION-ANWENDUNGEN
AE-PLC-M
Lernfabrik zur Montage
The "AE-PLC-M" is a mounting workstation commanded by a PLC that provides pieces to the system and mount them inside of the base pieces.The "AE-PLC-M" keeps the pieces in a vertical storage. The workstation take the pieces one by one, the quality...
BOTTLING WORKSTATION - AE-PLC-MEMB
  • AE-PLC-MEMB
Available
6.2.5.2.- PROCESS WORKSTATION-ANWENDUNGEN
AE-PLC-MEMB
Lernfabrik-Abfüllung
The Bottling Workstation, "AE-PLC-MEMB", designed by EDIBON, is an automatic rotary table with a vessel feeding system, a controlled water filling system, a cap feeder, a vessel closing system, and finally, an extraction system to a complete...
INDUSTRIAL PROCESSES CONTROL WORKSTATION - AE-PLC-CPI
  • AE-PLC-CPI
Available
6.2.4.- INDUSTRIELLE ANWENDUNGEN MIT SPS
AE-PLC-CPI
Lernfabrik-Industrielle Prozesskontrolle
The "AE-PLC-CPI" application is a unit that includes different technologies to carry out four control loops in closed loop: flow, level, temperature and pressure. A flexible system of ball valves and pipe connections makes the configuration of the...
PIECES FEEDER WORKSTATION - AE-PLC-APS
  • AE-PLC-APS
Available
6.2.5.1.- TEILZUFÜHRUNG ARBEITSPLATZANWENDUNGEN
AE-PLC-APS
Lernfabrik-Zuführstation
The Pieces Feeder Workstation, "AE-PLC-APS", is a unit that works with pneumatics and electro-pneumatics technologies.The function of the "AE-PLC-APS" is to supply pieces and to verify them, if they are acceptable.The pieces will be supplied one...
LINEAR POSITION AND FORCE - M45
  • M45
Available
14.2.1.5.- INSTRUMENTATION & KONTROLLE
M45
Lineare Position und Kraft
Linear Variable Displacement Transducers (LVDT) provide a certain amount of voltage output relative to the parameters being measured, for example force, for signal conditioning.With Linear Position and Force Unit, "M45", designed by EDIBON, it is...
FAN HEATER AND/OR AIR HEAT EXCHANGER - FHAH
  • FHAH
Available
9.3.- WÄRMEPUMPEN
FHAH
Luftheizung und/oder Luftwärmetauscher
The unit Fan Heater and/or Air Heat Exchanger, "FHAH", designed by EDIBON, allows the visualization of a fan heater and its functions as a heat sink. It can also be used as a heat source working in conjunction with a heat pump.The main component...
MANOMETERS & MULTIMANOMETERS (SEVERAL TYPES): - HMM
  • HMM
Available
8.2.- MESSUNG
HMM
Manometer & Multimanometer (Verschiedene Typen):
Thanks to the "Manometer and Multimanometer, "HMM" collection designed by EDIBON, a comprehensive and versatile solution is provided with a wide variety of manometers tailored to specific pressure measurement needs. This collection ensures safe...
JACKETED VESSEL HEAT EXCHANGER FOR TICC - TIVE
Available
9.7.- WÄRMETAUSCHER
TIVE
Mantelbehälter-Wärmetauscher für TICC
Zubehör von TICC
The Jacketed Vessel Heat Exchanger for TICC, "TIVE", designed by EDIBON, provides a comprehensive environment for the detailed study of heat transfer between two non-mixing fluids. In this unit, hot water flows through a jacket, transferring heat...
COMPUTER CONTROLLED MARCET BOILER UNIT - TECMC
  • TECMC
Available
9.1.- GRUNDLAGEN UND GRUNDKONZEPTE DER THERMODYNAMIK
TECMC
Marcet-Kesselgerät, computergesteuert (PC)
The Computer Controlled Marcet Boiler Unit "TECMC" is an unit designed to demonstrate the relationship between pressure and temperature of the saturated steam for comparison with published results.The unit consists of an insulated stainless steel...
MACHINE DIAGNOSIS - MDU
  • MDU
Available
7.4.3.- INSTALLATIONS- UND WARTUNGSPRAXIS
MDU
Maschinendiagnose
The family of Machine Diagnosis Unit, "MDU", of EDIBON, allows you to perform vibration measurement practical exercises, measuring the displacement, velocity and acceleration of vibrations in the time-frequency range.The MDU Base Unit, "MDU-UB",...
LABORATORY FURNITURE - TF-LAB
  • TF-LAB
Available
TECHNISCHE MÖBEL
TF-LAB
Möbel für Laboratorien
The range of Laboratory Furniture, "TF-LAB", is a varied series of furniture that meets the main needs for storage and support, and teaching in a laboratory. The "TF-LAB" range of products consists of a base unit, hanging cabinet, laboratory table...
FRANCIS TURBINE MODEL - HT-F
Available
8.7.3.- TURBINEN
HT-F
Modell einer Francis-Turbine
Zubehör von HTMC
Computer Controlled Modular Hydraulic Turbine Unit,"HTMC", has been designed by EDIBON for the study and comparison of different types of small scale hydraulic turbines, allowing the determine the operation characteristics of this type of turbine,...
KAPLAN TURBINE MODEL - HT-K
Available
8.7.3.- TURBINEN
HT-K
Modell einer Kaplan-Turbine
Zubehör von HTMC
Computer Controlled Modular Hydraulic Turbine Unit,"HTMC", has been designed by EDIBON for the study and comparison of different types of small scale hydraulic turbines, allowing the determine the operation characteristics of this type of turbine,...
PELTON TURBINE MODEL - HT-P
Available
8.7.3.- TURBINEN
HT-P
Modell einer Pelton-Turbine
Zubehör von HTMC
Computer Controlled Modular Hydraulic Turbine Unit,"HTMC", has been designed by EDIBON for the study and comparison of different types of small scale hydraulic turbines, allowing the determine the operation characteristics of this type of turbine,...
RADIAL FLOW TURBINE MODEL - HT-FR
Available
8.7.3.- TURBINEN
HT-FR
Modell einer Radialturbine
Zubehör von HTMC
Computer Controlled Modular Hydraulic Turbine Unit,"HTMC", has been designed by EDIBON for the study and comparison of different types of small scale hydraulic turbines, allowing the determine the operation characteristics of this type of turbine,...
UNIT TO STUDY A MULTIPLE-DISC CLUTCH CUTAWAY MODEL - DCCM
Available
7.4.1.- ABSCHNITTLICHE MODELLE
DCCM
Modelliertes Gerät einer Mehrscheiben-Kupplung
Zubehör von CMTM
The Unit to Study a Multiple-Disc Clutch Cutaway Model provides insight into the operation of this clutch system, which uses multiple friction discs to increase torque transmission capacity.This type of clutch is widely used in chain tractor...
CENTRIFUGAL PUMP CUTAWAY MODEL UNIT - CPCM
  • CPCM
Available
8.9.1.- ABSCHNITTLICHE MODELLE
CPCM
Modelliertes Gerät einer Zentrifugalpumpe
The Centrifugal Pump Cutaway Model Unit, "CPCM", designed by EDIBON, allows the students to visualize the inner parts of a centrifugal pump, to evaluate the relation with each other accurately and to understand their function.The cutaway model of...
ANALOG/DIGITAL CONVERTERS MODULE - N-M60
  • N-M60
Available
2.3.3.- DIGITALE ELEKTRONIK
N-M60
Modul für Analog-Digital-Wandler
Most of the "information" generated in the world by various physical phenomena has a strong analogical character. This means that the information undergoes a continuous variation within certain limits determined over time. Of course, there is also...
LIGHT TEST MODULE - BS10
  • Zubehör von BS
Available
6.1.2.1.- SENSOREN UND ELEKTRONISCHE INSTRUMENTATION
BS10
Modul für Beleuchtungsprüfungen
Zubehör von BS
The objective of the Light Test Module, "BS10", is to show some of the techniques used to measure light or illumination intensity.The module is equipped with a lamp whose light intensity can be controlled by the variation of the voltage...
LIGHT TEST MODULE FOR PLC - BS10-PLC
Available
6.2.3.- INSTRUMENTATION UND STEUERUNG MIT SPS
BS10-PLC
Modul für Beleuchtungsprüfungen für PLC
Zubehör von BS-PLC
The "BS10-PLC" has been designed to study different light measurement techniques and control light intensity through a PLC. This unit is composed of a lamp whose intensity can be controlled according to the voltage applied and a series of...
DIGITAL/ANALOG CONVERTERS MODULE - N-M61
  • N-M61
Available
2.3.3.- DIGITALE ELEKTRONIK
N-M61
Modul für Digital-Analog-Wandler
Digital/analog conversion happens when you want to recover or re-obtain a digital signal that has been processed and we want to regenerate it. A signal that has been sampled, for example, a temperature signal and we need to return it to the...
DIGITAL SYSTEMS & CONVERTERS MODULE - N-M10
  • N-M10
Available
14.2.1.3.- DIGITALE ELEKTRONIK
N-M10
Modul für Digitale Systeme und Konverter
Generally, an analog to digital converter is an electronic device that converts an analog voltage input to a digital number.digital number. The digital output can use different coding schemes, such as binary, although some non-electrical or...
TACHOMETER TEST MODULE - BS7
  • Zubehör von BS
Available
6.1.2.1.- SENSOREN UND ELEKTRONISCHE INSTRUMENTATION
BS7
Modul für Drehzahlmesserprüfungen
Zubehör von BS
The Tachometer Test Module, "BS7", has been designed to teach linear and angular speed measurement techniques. In this module placed on the upper part we have a miniature motor used to move the axle. The motor speed can be changed adjusting the...
THREE-PHASE CIRCUITS MODULE - N-M18
  • N-M18
Available
14.2.1.1.- GRUNDLEGENDE ELEKTRISCHE GESETZKONZEPTE
N-M18
Modul für Drei-Phasen-Schaltungen
Three-phase voltage is essentially a system of three alternating voltages, coupled (all 3 are produced simultaneously in a generator) and 120º out of phase with each other (i.e. one third of the period).The Three-phase Circuits Module, "N-M18",...
PRESSURE TEST MODULE - BS3
  • Zubehör von BS
Available
6.1.2.1.- SENSOREN UND ELEKTRONISCHE INSTRUMENTATION
BS3
Modul für Druckprüfungen
Zubehör von BS
The Pressure Test Module, "BS3", has been designed to teach the use and applications of this kind of sensors measurement systems. It shows the different pressure measurement techniques. On the left upper side of the module there is a pressure...
PRESSURE TEST MODULE FOR PLC - BS3-PLC
Available
6.2.3.- INSTRUMENTATION UND STEUERUNG MIT SPS
BS3-PLC
Modul für Druckprüfungen für PLC
Zubehör von BS-PLC
The "BS3-PLC" has been designed to study the pressure measurement techniques and control application with a PLC. This unit is equipped with a pressure chamber with several sensors, with different uses and applications, adjusted to measure the...
FLOW TEST MODULE - BS4
  • Zubehör von BS
Available
6.1.2.1.- SENSOREN UND ELEKTRONISCHE INSTRUMENTATION
BS4
Modul für Durchflussprüfungen
Zubehör von BS
The objective of Flow Test Module, "BS4", is to show techniques to measure changeable fluids.The module is made up of two tanks assembled on a structure. In one of them there is a pumping system that allows to pump the water from the reserve tank,...
FLOW TEST MODULE FOR PLC - BS4-PLC
Available
6.2.3.- INSTRUMENTATION UND STEUERUNG MIT SPS
BS4-PLC
Modul für Durchflussprüfungen für PLC
Zubehör von BS-PLC
The "BS4-PLC" has been designed to study the flow measurement techniques and control with PLC. This unit is unit with two tanks assembled on a structure with a pumping system that allows pumping the water from the reservoir tank, through the...
OWN DEVELOPMENT MODULE - N-M15
Available
2.2.- KITS FÜR DIE MONTAGE VON STROMKEISEN
N-M15
Modul für Eigene Entwicklungen
Zubehör von M-KITS
The Own Development Module "N-M15", designed by EDIBON, consists of a circuit board that will allow the realization of a set of assemblies on the mentioned board, allowing the study of the basic concepts of direct current circuits.The circuits can...
Informationen anfordern