Verkaufshits

613 - 648 von 950 Artikel(n)

MEAL

Available

7.1.3.- STATIK UND DYNAMIK

MEAL

Gerät zur Untersuchung und Analyse von Nocken

The Cam Analysis Unit, "MEAL", designed by EDIBON, allows to observe the effect of the profile of a cam, the study of the displacement, velocity and acceleration profiles of the cam and the identification of the factors that can modify the...

PERMEABILITY/FLUIDISATION STUDIES UNIT - PEFP

PEFP

Available

11.1.1.- FLUIDIZATION

PEFP

Gerät zur Untersuchung von Fluidisierung und Durchlässigkeit

The Permeability/Fluidisation Studies Unit, "PEFP", designed by EDIBON, allows to observe the behaviour of liquid fluidisation in a granular bed.The main element is a permeability meter. It is a transparent cylinder that supports the soil sample...

COMPUTER CONTROLLED PERMEABILITY/FLUIDISATION STUDIES UNIT - PEFPC

PEFPC

Available

11.1.1.- FLUIDIZATION

PEFPC

Gerät zur Untersuchung von Fluidisierung und Durchlässigkeit, computergesteuert (PC)

The Computer Controlled Permeability/Fluidisation Studies Unit, "PEFPC", designed by EDIBON, allows to observe the behaviour of liquid fluidisation in a granular bed.The main element is a permeability meter. It is a transparent cylinder that...

UNIT FOR STUDYING FORCES IN A SIMPLE BAR STRUCTURE - MFBS

MFBS

Available

7.1.6.- STRUKTURMECHANIK

MFBS

Gerät zur Untersuchung von Kräften in einer einfachen Stabstruktur (einfachen Fachwerken)

The Unit for Studying Forces in a Simple Bar Structure, "MFBS", designed by EDIBON allows the study of forces acting on a simple truss when is subjected to a point load in one of the nodes that make up the structure.It consists of a group of five...

UNIT FOR STUDYING FORCES IN AN OVERDETERMINATE TRUSS - MFCS2

MFCS2

Available

7.1.6.- STRUKTURMECHANIK

MFCS2

Gerät zur Untersuchung von Kräften in hyperstatischen Fachwerken

The Unit for studying Forces in an Overdeterminate Truss, "MFCS2", designed by EDIBON, allows the measurement of the bar forces in a statically determinate truss and in a statically overdeterminate truss, the study of the distribution of forces in...

UNIT FOR STUDYING FORCES IN A JIB CRANE - MFPG

MFPG

Available

7.1.6.- STRUKTURMECHANIK

MFPG

Gerät zur Untersuchung von Kräften in Kranarmen

The Unit for studying Forces in a Jib Crane, "MFPG", has been designed by EDIBON to study the tensile and compressive forces in a planar central force system based on the example of a crane jib.The unit represents a planar central force system in...

UNIT FOR STUDYING FORCES IN DIFFERENT SINGLE PLANE TRUSSES - MFCS1

MFCS1

Available

7.1.6.- STRUKTURMECHANIK

MFCS1

Gerät zur Untersuchung von Kräften in verschiedenen Aufbauten von ebenen Fachwerken

The Unit for studying Forces in Different Single Plane Trusses, "MFCS1", designed by EDIBON, allows the measurement of the bar forces in various single plane trusses, the study of the dependency on the external force and the comparison of the...

COMPUTER CONTROLLED TEACHING UNIT FOR THE STUDY OF REGULATION AND CONTROL - RYC

Zubehör von RYC/T

Available

6.1.1.1.- THEORETISCH-PRAKTISCHE GRUNDLAGEN

RYC

Gerät zur Untersuchung von Regelung und Steuerung, computergesteuert (PC)

Zubehör von RYC/T

The Computer Controlled Teaching Unit for the Study of Regulation and Control, "RYC", is designed by EDIBON is common to all "RYC" type unit and constitutes the base unit for performing regulation and automatic control practices. It is organized...

SIMPLE STABILITY PROBLEMS STUDY UNIT - MEPE

MEPE

Available

7.1.6.- STRUKTURMECHANIK

MEPE

Gerät zur Untersuchung von Stabilitätsproblemen

The Simple Stability Problems Study Unit, "MEPE", has been designed by EDIBON to study the stability of a bar subjected to buckling by obtaining the critical load in different configurations.The unit consists of two bars of same length connected...

COMPUTER CONTROLLED TORSIONAL VIBRATION UNIT - MEVTC

MEVTC

Available

7.1.4.- VIBRATIONEN UND OSZILLATIONEN

MEVTC

Gerät zur Untersuchung von Torsionsschwingungen, computergesteuert (PC)

The Computer Controlled Torsional Vibration Unit, "MEVTC", has been designed by EDIBON to study torsion suffered by some shafts with rotation motion, apart from studying the torsional rigidity and the behavior of a torsional vibration system with...

Available

7.2.2.- ZAHNRÄDER, DIFFERENTIALE UND GETRIEBE

MEC

Gerät zur Untersuchung von Überdrehzahl

The Overdrive Unit, "MEC", includes a set of epicyclical gears that represent an application of a simple epicyclic arrangement of the type used in a motor vehicle overdrive.Simple epicyclic set consists of:Sun gear that rotates together with the...

UNIT FOR STUDYING DEFORMATION OF TRUSSES - MFCS3

MFCS3

Available

7.1.6.- STRUKTURMECHANIK

MFCS3

Gerät zur Untersuchung von Verformungen in Fachwerken

The Unit for studying Deformation of Trusses, "MFCS3", designed by EDIBON, allows the measurement of the stresses in the bars in different types of trusses, and the study of the dependence of the external force and the comparison of the...

COMPUTER CONTROLLED THERMAL RADIATION AND LIGHT RADIATION UNIT - TRTC

TRTC

Available

9.6.- WÄRMEÜBERTRAGUNG

TRTC

Gerät zur Untersuchung von Wärmestrahlung und Lichtstrahlung, computergesteuert (PC)

The Computer Controlled Thermal Radiation and Light Radiation Unit, "TRTC", has been designed to demonstrate the laws of radiant heat transfer and radiant heat exchange. It basically consists in two independent parts. One of the parts is for the...

LAMINAR FLOW VISUALIZATION AND ANALYSIS UNIT - LFA

Available

8.4.- FLUSSVISUALISIERUNG

LFA

Gerät zur Visualisierung und Analyse von laminarer Strömung

The Laminar Flow Visualization and Analysis Unit, "LFA", allows a complete study of the two-dimensional problems associated with the laminar flow by the visualization of the different models of flow, which can be observed thanks to an efficient...

HYDROGEN BUBBLE FLOW VISUALIZATION UNIT - UVF

Available

8.4.- FLUSSVISUALISIERUNG

UVF

Gerät zur Visualisierung von Strömung mit Wasserstoffblasen

The Hydrogen Bubble Flow Visualization Unit, "UVF", designed by EDIBON, is a self-contained unit designed to study different flow patterns through the hydrogen bubble flow visualization technique.Bubbles are generated by electrolysis by the...

MOBILE BED AND FLOW VISUALIZATION UNIT (WORKING SECTION: 4000X610 MM) - HVFLM-4

HVFLM-4

Available

13.1.- HYDROLOGIE UND HYDROGEOLOGIE

HVFLM-4

Gerät zur Visualisierung von Strömung und beweglichem Bett (Arbeitsbereich: 4000X610 mm)

The Mobile Bed and Flow Visualization Unit (working section: 4000 x 610 mm), "HVFLM-4", may be used mainly in two study fields. The first one is the investigation of mobile beds, which are related to water courses and civil engineering structures....

FREE AND FORCED CONVECTION HEAT TRANSFER MODULE FOR TSTCB - TXC/FFB

Zubehör von TSTCB

Available

9.6.- WÄRMEÜBERTRAGUNG

TXC/FFB

Gerät zur Wärmeübertragung durch freie und erzwungene Konvektion für TSTCB

Zubehör von TSTCB

The Free and Forced Convection Heat Transfer Unit for TSTCB, "TXC/FFB", enables the study of the performance of different heat exchangers by analyzing the heat transfer coefficients of each exchanger exposed to various air flow rates.This unit...

FREE AND FORCED CONVECTION HEAT TRANSFER MODULE FOR TSTCC - TXC/FF

Zubehör von TSTCC

Available

9.6.- WÄRMEÜBERTRAGUNG

TXC/FF

Gerät zur Wärmeübertragung durch freie und erzwungene Konvektion für TSTCC

Zubehör von TSTCC

The Free and Forced Convection Heat Transfer Unit for TSTCC, "TXC/FF", enables the study of the performance of different heat exchangers by analyzing the heat transfer coefficients of each exchanger exposed to various air flow rates.This unit...

DROP BALL VISCOMETER AND RESISTANCE COEFFICIENT DETERMINATION UNIT - HVB

Available

8.2.- MESSUNG

HVB

Gerät: Kugelfallviskosimeter und Bestimmung des Widerstandskoeffizienten

The Drop Ball Viscometer and Resistance Coefficient Determination Unit, "HVB", designed by EDIBON, consists of two precision transparent tubes fixed onto a frame in which a ball is allowed to drop down through different liquids. Both tubes can be...

PPCM

Available

8.9.1.- ABSCHNITTLICHE MODELLE

PPCM

Gerät: Schnittmodell einer Kolbenpumpe

The Piston Pump Cutaway Model Unit, "PPCM", designed by EDIBON, allows the students to visualize the inner parts of a piston pump, to evaluate the relation with each other accurately and to understand their function.The cutaway model of piston...

UNIT TO STUDY A SPUR GEAR CUTAWAY MODEL - SGCM

Zubehör von CMTM

Available

7.4.1.- ABSCHNITTLICHE MODELLE

SGCM

Gerät: Schnittmodell eines geradverzahnten Getriebes

Zubehör von CMTM

The Unit to Study a Spur Gear Cutaway Model, "SGCM, designed by EDIBON, It is a mitre gear.l power transmission systems.It is made up of bevel gears that consist of two conical cogwheels. This device is used to transmit motion between two...

UNIT TO STUDY A MITRE GEAR CUTAWAY MODEL - MGCM

Zubehör von CMTM

Available

7.4.1.- ABSCHNITTLICHE MODELLE

MGCM

Gerät: Schnittmodell eines Kegelradgetriebes

Zubehör von CMTM

The Unit to Study a Mitre Gear Cutaway Model, "MGCM", designed by EDIBON, allows for the study of this type of transmission, which uses bevel gears to transmit motion between two perpendicular shafts.Due to their ability to change the direction of...

UNIT TO STUDY A PLANETARY GEAR CUTAWAY MODEL - PGCM

Zubehör von CMTM

Available

7.4.1.- ABSCHNITTLICHE MODELLE

PGCM

Gerät: Schnittmodell eines Planetengetriebes

Zubehör von CMTM

The Unit to Study a Planetary Gear Cutaway Model, "PGCM", designed by EDIBON, allows for the study of one or more external or planet gears that revolves about a central or sun gear.Planetary gears are widely used in vehicle gearboxes, speed...

UNIT TO STUDY A WORM GEAR CUTAWAY MODEL - WGCM

Zubehör von CMTM

Available

7.4.1.- ABSCHNITTLICHE MODELLE

WGCM

Gerät: Schnittmodell eines Schneckengetriebes

Zubehör von CMTM

The Unit to Study a Worm Gear Cutaway Model, "WGCM", designed by EDIBON, allows for the study of a helical worm screw and a circular cogwheel.This type of transmission is widely used in automatic doors, elevators, and mechanisms that require...

UNIT TO STUDY A TWO-STAGE SPUR GEAR CUTAWAY MODEL - SGCM/2

Zubehör von CMTM

Available

7.4.1.- ABSCHNITTLICHE MODELLE

SGCM/2

Gerät: Schnittmodell eines zweistufigen geradverzahnten Getriebes

Zubehör von CMTM

The Sectioned Model of a Spur Gear Transmission, "SGCM/2", designed by EDIBON, allows for the study of this type of transmission, which is the simplest and most widely used in mechanical systems for motion and power transmission.These systems are...

COMPUTER CONTROLLED CLOSED AERODYNAMIC TUNNEL, 2000X2000 MM - TACL2000/2000C

TACL2000/2000C

Available

8.6.- AERODYNAMIK

TACL2000/2000C

Geschlossener Aerodynamischer Versuchstand, 2000X2000 mm, computergesteuert (PC)

Aerodynamics is the part of fluid mechanics that studies the motion of gases and the forces or reactions to which the bodies they interact with are subjected. Aerodynamics is not only important by itself but also as a complement to aeronautics....

MESE-T

Available

7.1.2.2.- VERZAHNUNG

MESE-T

Getriebe-Studie

The Geared Study, "MESE/T", has been designed by EDIBON to dynamic study of different gears, including a standard three shaft gear train for study, which can be modified with a simple setting to obtain a simple transmission. The Gear Study,...

CUTAWAY DC COMPOUND EXCITATION MOTOR-GENERATOR - EMT4-S

EMT4-S

Available

4.4.1.- ABSCHNITTLICHE MODELLE

EMT4-S

Gleichstromgenerator mit Kompound-Erregung, Abgeschnitten

It includes a Cut away DC compound excitation motor-generator (EMT4-S) in order to study the different parts of this motor type.

CUTAWAY DC SHUNT EXCITATION MOTOR-GENERATOR - EMT3-S

EMT3-S

Available

4.4.1.- ABSCHNITTLICHE MODELLE

EMT3-S

Gleichstromgenerator mit Nebenschlussregelung, Abgeschnitten

It includes a Cut away DC shunt excitation motor-generator (EMT3-S) in order to study the different parts of this motor type.

CUTAWAY DC SHUNT/SERIES/COMPOUND EXCITATION MOTOR-GENERATOR - EMT5-S

EMT5-S

Available

4.4.1.- ABSCHNITTLICHE MODELLE

EMT5-S

Gleichstromgenerator mit Reihen-/Nebensch

It includes a Cut away DC shunt-series compound excitation motor (EMT5-S) in order to study the different parts of this motor type.

CUTAWAY DC SERIES EXCITATION MOTOR-GENERATOR - EMT2-S

EMT2-S

Available

4.4.1.- ABSCHNITTLICHE MODELLE

EMT2-S

Gleichstromgenerator mit Reihenerregung, Abgeschnitten

It includes a Cut away DC series excitation motor-generator (EMT2-S) in order to study the different parts of this motor type.

CUTAWAY DC INDEPENDENT EXCITATION MOTOR-GENERATOR - EMT1-S

EMT1-S

Available

4.4.1.- ABSCHNITTLICHE MODELLE

EMT1-S

Gleichstromgenerator mit unabhängiger Erregung, Gerät

It includes a Cut away DC independent excitation motor-generator (EMT1-S) in order to study the different parts of this motor type.

DIRECT CURRENT (DC) CIRCUITS KIT - M1/KIT

Zubehör von M-KITS

Available

2.2.- KITS FÜR DIE MONTAGE VON STROMKEISEN

M1/KIT

Gleichstromschaltungs-Kit (DC)

Zubehör von M-KITS

With the Direct Current (DC) Circuits Kit, "M1/KIT", designed by EDIBON, you can begin to study the basic principles of direct current.

BASIC UNIT OF MECHANICAL DRIVE SYSTEMS - MDSU

MDSU

Available

7.4.3.- INSTALLATIONS- UND WARTUNGSPRAXIS

MDSU

Grundgerät für mechanische Antriebssysteme

The Basic Unit of Mechanical Drive Systems, "MDSU", consists of a main frame where a series of accessories and elements are arranged, distributed in modules of different level, thought to introduce the user in the field of mechanical systems and...

SERVOSYSTEMS BASIC UNIT FOR DC MOTORS - SERIN/CCB

SERIN/CCB

Available

6.1.2.2.- LEISTUNGSELEKTRONIK UND INDUSTRIELLE ELEKTRONIK

SERIN/CCB

Grundgerät für Servosysteme mit DC-Motoren

The Servosystems Basic Unit for DC Motors, "SERIN/CCB", is an unit whose goal is studying low power servo systems. It is a low power DC motor speed control trainer that has a breakdown simulator.This unit is a basic version of the Computer...

THERMAL SOLAR ENERGY BASIC UNIT - MINI-EEST

MINI-EEST

Available

5.3.2.- SOLARTHERMISCHE ENERGIE

MINI-EEST

Grundgerät für Solarthermie

This unit is a system that transforms solar energy into usable thermal energy.This unit uses the thermosiphon system to heat water or the traditional pumping system. In both cases, the absorbed thermal energy is given by the simulated solar...

FÜR WEITERE INFORMATIONEN, KONTAKTIEREN SIE UNS