5.- ENERGIETECHNIK

Energie ist eine natürliche Ressource, die für eine spezifische Nutzung extrahiert und transformiert wird, um den Bedarf der Gesellschaft an Dienstleistungen und Warenproduktion zu decken. Was die Primärenergiequellen betrifft, so gibt es erneuerbare Energien und nicht erneuerbare Energien.

Mehr sehen

Erneuerbare Energien sind solche, die aus unerschöpflichen Quellen oder Quellen mit Regenerationsfähigkeit stammen. Bemerkenswert sind die erneuerbaren Energien: Photovoltaik-Solarenergie, Solarwärmeenergie, Windenergie, Meeresenergie, Geothermie und Biokraftstoffe.

Nicht erneuerbar oder konventionelle Energien sind solche, die aus begrenzten, in der Natur vorkommenden Quellen stammen und im Allgemeinen eine große Umweltbelastung verursachen. Die häufigsten sind fossile Brennstoffe wie z.B. Kohle, Öl und Erdgas. Und auf der anderen Seite Nuklearenergie aus Kernspaltung und Fusion.

Kraftwerke sind notwendig, um Strom aus diesen Primärenergiequellen zu gewinnen. Beispiele sind Kohlekraftwerke, Kombikraftwerke, Kernkraftwerke, Kernkraftwerke, Solarthermische Kraftwerke, Photovoltaikkraftwerke, Wasserkraftwerke, Windkraftwerke, etc.

Nichterneuerbare Energien sind heute zunehmend knappe Güter, die zusammen mit globale Erwärmung das Konzept Energieeffizienz immer wichtiger werden lassen. Es werden immer strongchrittlichere technologische Lösungen untersucht, um eine maximale Effizienz bei der Energieerzeugung, bei den Energiesystemen für den Transport sowie bei der EnergieaufnahmeKontrolle und Verwaltung zu erreichen. Technologie und Energieeffizienz gehen Hand in Hand. Ein Beispiel dafür ist der zunehmende Ausbau von intelligenten Netzen. Sie reichen von der Stromerzeugung mit erneuerbaren Energien und der Stromübertragung und Verteilungssystemen bis hin zum Management des Energieverbrauchs durch intelligente Messsysteme, wie z.B. Smart Meter.

Siehe Produkte
Verwandte Materialien
ENERGIETECHNIK UNTERKATEGORIE DER

5.1.- SMART GRIDS UND POWER SYSTEMS

Smart Grids sind das Ergebnis der Entwicklung von Stromversorgungssystemen. Es sind gewachsene Netze, die StromNachfrage nachhaltig, zuverlässig und wirtschaftlich verwalten. Sie zeichnen sich durch eine strongchrittliche Infrastruktur aus, die die Integration neuer Komponenten in das schlaue...
Sehen

5.2.- MIKROGRIDE

Smart Grids sind entwickelte Netzwerke, die Stromnachfrage auf eine nachhaltige, zuverlässige und ökonomische Weise verwalten. Sie zeichnen sich durch eine chrittliche Infrastruktur aus, die die Integration neuer Komponenten in das Smart Grid.Die konventionelle Struktur des elektrischen Systems...
Sehen

5.3.- ERNEUERBARE ENERGIEN

Erneuerbare Energien sind saubere, unbegrenzte und zunehmend wettbewerbsfähige Energiequellen. Sie sind Energiequellen, die auf der Nutzung von natürlichen Ressourcen basieren: Sonne, Wind, Wasser oder pflanzliche oder tierische Biomasse. Sie unterscheiden sich von fossilen Brennstoffen vor allem...
Sehen

5.4.- KONVENTIONELLE ENERGIEN

Konventionell oder nicht-erneuerbare Energien sind all jene Energien, die in der Natur nur begrenzt vorkommen. Es lassen sich zwei Arten von konventionellen Energien unterscheiden: fossile Brennstoffe und nukleare Brennstoffe. Kohle, Öl und natürlichGassind fossile Brennstoffe. Sie stammen aus...
Sehen

5.5.- ENERGIESPEICHER

Heute ist Energiespeicherung essentiell für konventionelle Stromnetze, um einen signifikanten Schritt in der Dezentralisierung von Energie zu machen. Das Problem ist, dass elektrische Leistung nicht in ihrer ursprünglichen Form gespeichert werden kann, d.h. es ist notwendig, sie in andere Formen...
Sehen

5.6.- HOCHSPANNUNGS- UND ELEKTRISCHE SCHUTZSYSTEME

Hochspannungs-Energiesysteme kann als eines der größten angeschlossenen Systeme der Welt betrachtet werden. Hunderte von Kilometern Stromleitungen verbinden von Kleinstädten und Städten bis hin zu ganzen Ländern. Sogar unterirdische Kabel verbinden Inseln unter dem Meer, um auch den Energiebedarf...
Sehen

5.7.- INSTALLATIONEN UND WARTUNG

Die Bedürfnisse der heutigen Gesellschaft sind eine Herausforderung für jede Industrie, da sie sich in ständiger Entwicklung und Erneuerung befinden müssen, um sich an diese Bedürfnisse anzupassen.In den letzten Jahren, als Folge der neuen industriellen Revolution oder Industrie 4. 0, dem...
Sehen

ENERGIETECHNIK SYSTEME FÜR TECHNISCHE AUSBILDUNG

73 - 108 von 136 Artikel(n)
STAND-ALONE WIND TURBINE APPLICATION - AEL-SWT
  • AEL-SWT
Available
5.3.3.- WINDENERGIE

AEL-SWT

Anwendung von Windturbinen in isolierten Netzwerken

The Stand-Alone Wind Turbine Aplication, "AEL-SWT", has been designed by Edibon for the training at both the theoretical and practicallevels in the field of wind turbines.The "AEL-SWT" application provides several levels of training to give the...
COMPUTER CONTROLLED WIND ENERGY UNIT - EEEC
  • EEEC
Available
5.3.3.- WINDENERGIE

EEEC

Gerät für Windenergie, computergesteuert (PC)

The Computer Controlled Wind Energy Unit, "EEEC", contains an aerogenerator, in laboratory-scale, and is used to study the conversion of kinetic wind energy into electrical energy and to study the influence of some factors on this generation.The...
WIND ENERGY UNIT - EEE
  • EEE
Available
5.3.3.- WINDENERGIE

EEE

Gerät für Windenergie

The Wind Energy Unit, "EEE", contains an aerogenerator, in laboratory-scale, and is used to study the conversion of kinetic wind energy into electrical energy and to study the influence of some factors on this generation.The unit consists of a...
WIND ENERGY BASIC UNIT - MINI-EEE
  • MINI-EEE
Available
5.3.3.- WINDENERGIE

MINI-EEE

Grundgerät für Windenergie

The Wind Energy Basic Unit, "MINI-EEE", is a small-scale unit designed to study wind energy and the influence of some factors on its generation.This unit consists of a transparent tunnel, a wind turbine with rotor to place up to six blades and a...
COMPUTER CONTROLLED WIND ENERGY BASIC UNIT - MINI-EEEC
  • MINI-EEEC
Available
5.3.3.- WINDENERGIE

MINI-EEEC

Grundgerät für Windenergie, computergesteuert (PC)

The Computer Controlled Wind Energy Basic Unit, "MINI-EEEC", has been designed by EDIBON to study wind energy and the influence of some factors on its generation.This unit consists of a transparent tunnel, a wind turbine with rotor to place up to...
GEOTHERMAL (HIGH ENTHALPY) ENERGY UNIT - EG6B
  • EG6B
Available
5.3.5.- GEOTHERMISCHE ENERGIE

EG6B

Gerät für Geothermische Energie (hohe Entalpie)

The Geothermal (high enthalpy) Energy Unit, "EG6B", developed by EDIBON, has the aim of introducing the student in a renewable energy, increasingly important.This unit simulates the steam produced in the well, by using a steam generator. Then the...
GEOTHERMAL (LOW ENTHALPY) ENERGY UNIT - EG5B
  • EG5B
Available
5.3.5.- GEOTHERMISCHE ENERGIE

EG5B

Gerät für Geothermische Energie (niedrige Entalpie)

The Geothermal (low enthalpy) Energy Unit, "EG5B", designed by EDIBON, consists of a cooling circuit, a small tank with pipes covered with water (bath) and a chilling unit (heat pump). The inside of the earth is simulated with them. There is...
COMPUTER CONTROLLED PELTON TURBINE - TPC
  • TPC
Available
5.3.6.- HYDRAULISCHE ENERGIE

TPC

Pelton-Turbine, computergesteuert (PC)

The Computer Controlled Pelton Turbine, "TPC", designed by EDIBON, consists of a small-scale Pelton turbine, with a valve that allows the flow to be regulated. The turbine includes a PELTON runner with 16 buckets, which can be clearly seen through...
COMPUTER CONTROLLED FRANCIS TURBINE - TFC
  • TFC
Available
5.3.6.- HYDRAULISCHE ENERGIE

TFC

Francis-Turbine, computergesteuert (PC)

The Computer Controlled Francis Turbine, "TFC", consists of a small-scale Francis Turbine, with a valve that allows flow regulation and has a ring with adjustable guide vanes that allows control of the angle of incidence of the water in the...
COMPUTER CONTROLLED KAPLAN TURBINE - TKC
  • TKC
Available
5.3.6.- HYDRAULISCHE ENERGIE

TKC

Kaplan-Turbine, computergesteuert (PC)

The Computer Controlled Kaplan Turbine, "TKC", consists of a small-scale Kaplan turbine that has a ring with adjustable guide vanes, which allow the control of water flow in the turbine.In order to raise the fluid, it has a computer controlled...
COMPUTER CONTROLLED RADIAL FLOW TURBINE - TFRC
  • TFRC
Available
5.3.6.- HYDRAULISCHE ENERGIE

TFRC

Radialturbine, computergesteuert (PC)

The Computer Controlled Radial Flow Turbine, "TFRC", consists of a small-scale radial flow turbine with two nozzles at 90 degrees to the perpendicular direction of the axis of rotation.In order to raise the fluid, it has a computer controlled pump...
COMPUTER CONTROLLED AXIAL FLOW TURBINE - TFAC
  • TFAC
Available
5.3.6.- HYDRAULISCHE ENERGIE

TFAC

Axialturbine, computergesteuert (PC)

The Computer Controlled Axial Flow Turbine, "TFAC", consists of a small-scale turbine with single-stage axial flow input. It has eight nozzles that act as water rings to the rotor, four of which have an incidence angle of 20º and the other four of...
BIOETHANOL PROCESS UNIT - EBEB
  • EBEB
Available
5.3.7.- BIOKRAFTSTOFFE

EBEB

Gerät für den Bioethanolprozess

The Bioethanol Process Unit (EBEB) has been designed to study and control the bioethanol production process on a laboratory scale. This unit allows to monitor and examine all the important processes, from liquefaction and saccharification of the...
COMPUTER CONTROLLED BIOGAS PROCESS UNIT - EBGC
  • EBGC
Available
5.3.7.- BIOKRAFTSTOFFE

EBGC

Gerät für den Biogasprozess, computergesteuert (PC)

The Computer Controlled Biogas Process Unit, "EBGC", is supplied with two packed anaerobic digesters. In this way, the user can work either in only one stage or in two stages, separating the different phases of the digestion process (the processes...
BIOGAS PROCESS UNIT - EBGB
  • EBGB
Available
5.3.7.- BIOKRAFTSTOFFE

EBGB

Gerät für den Biogasprozess

The Biogas Process Unit, "EBGB", is supplied with two packed anaerobic digesters. In this way, the user can work either in only one stage or in two stages, separating the different phases of the digestion process (the processes of hydrolysis,...
BIODIESEL PROCESS UNIT - EBDB
  • EBDB
Available
5.3.7.- BIOKRAFTSTOFFE

EBDB

Gerät für den Biodieselprozess

The process carried out by the Biodiesel Process Unit, "EBDB", consists on transforming the fatty acids contained in vegetable oils into a high energy content biofuel.Basically, the process consists of two well-defined stages:Stage I: Mixing the...
BIOMASS PROCESS UNIT - EBMB
  • EBMB
Available
5.3.7.- BIOKRAFTSTOFFE

EBMB

Gerät für den Biomasseprozess

The main element of the unit is the biomass boiler, which will heat the water that will flow through the other components transferring its heat.The boiler is a biomass boiler of 16 kW that works with pellet and other granulated fuels. The body of...
FUEL CELL ENERGY APPLICATION - AEL-FCLL
  • AEL-FCLL
Available
5.3.9.- WASSERSTOFFKRAFTSTOFFZELLEN

AEL-FCLL

Anwendung von Brennstoffzellenenergie

The Fuel Cell Energy Application, "AEL-FCLL", has been designed by EDIBON to demonstrate how fuel cells work.This application includes a proton exchange membrane (PEM) fuel cell stack composed of several cells in the shape of a ribbed plate that...
Informationen anfordern