2HE Elektroniklabor für die Hochschulausbildung

HIGHER EDUCATION ELECTRONICS LABORATORY - 2HE

Katalog

Erweiterungen

PLC

SPS Industrielle Prozesssteuerung

ECL

EDIBON Cloud Lernen

FSS

Fehlersimulationssystem

ICAI

Interaktive Computerunterrichtssoftware

ELK

EDIBON Software Development KIT, Unterstützt von NI LabVIEW ™

Bauelement

0210

ELEMENTARY ELECTRONICS. Basic Module

0211

ELEMENTARY ELECTRONICS. Medium Module

0212

ELEMENTARY ELECTRONICS. Advanced Module

0230

TRANSDUCERS AND SENSORS. Basic Module

0231

SENSORS INSTRUMENTATION. Basic Module

0232

CONTROLLERS. Basic Module

0240

CONTROL ELECTRONICS. Basic Module

0250

DIGITAL ELECTRONICS. Basic Module

0260

INDUSTRIAL ELECTRONICS. Basic Module

0270

MICROPROCESSORS. Basic Module

ÄHNLICHE NEUIGKEITEN

ERGÄNZENDE AUSRÜSTUNG

MODULAR SYSTEM FOR THE STUDY OF SENSORS: - BS

Available

6.1.2.1.- SENSOREN UND ELEKTRONISCHE INSTRUMENTATION

Baukastensystem zum Erlernen von Sensoren:

"BS" System includes a set of electronic components with a twofold purpose: to control the signal produced by the transducers, and to evaluate and quantify it.Sensors or transducers are common elements in the state of our technology. Therefore...

VIBRATIONS AND/OR DEFORMATIONS TEST MODULE - BS1

Available

6.1.2.1.- SENSOREN UND ELEKTRONISCHE INSTRUMENTATION

BS1

Vibrations and/or Deformations Test Module

This Test Module has been designed to teach mechanical vibration and displacement variable measurement techniques.On the upper side of the test module there is a girder or elastic/vibrant sheet that is the one carrying the sensors, which can have...

BS10

Available

6.1.2.1.- SENSOREN UND ELEKTRONISCHE INSTRUMENTATION

BS10

Licht- Testmodul

The objective of this module is to show some of the techniques used to measure light or illumination intensity.The module is equipped with a lamp whose light intensity can be controlled by the variation of the voltage supplied.This module...

Available

6.1.2.1.- SENSOREN UND ELEKTRONISCHE INSTRUMENTATION

BS2

Temperatur- Testmodul.

The Temperature Test Module has been designed to teach the use and applications of sensors of temperature as a measure, and its control.We have a half-open space in whose interior there are two lamps that are going to heat that space. Temperatures...

Available

6.1.2.1.- SENSOREN UND ELEKTRONISCHE INSTRUMENTATION

BS3

Druck- Testmodul.

The Pressure Test Module has been designed to teach the use and applications of this kind of sensors measurement systems. It shows the different pressure measurement techniques.On the left upper side of the module there is a pressure chamber with...

Available

6.1.2.1.- SENSOREN UND ELEKTRONISCHE INSTRUMENTATION

BS4

Durchfluss- Testmodul

The objective this module is to show techniques to measure changeable fluids.The module is made up of two tanks assembled on a structure. In one ofthem there is a pumping system that allows to pump the water from the reserve tank, using a...

Available

6.1.2.1.- SENSOREN UND ELEKTRONISCHE INSTRUMENTATION

BS5

Ofen- Testmodul

With "BS-5" Test Module is possible to study temperature measurement techniques using several kinds of sensors placed inside the sealed place that is used as oven.This module is basically made up of an oven that contains a changeable speed...

Available

6.1.2.1.- SENSOREN UND ELEKTRONISCHE INSTRUMENTATION

BS6

Füllstand- Testmodul.

The Liquid Level Test Module "BS-6" has been designed to teach the use and applications of level sensors and their measurement systems. This module teaches techniques to measure and control the liquid level in a tank.On this there is a two tanks...

Available

6.1.2.1.- SENSOREN UND ELEKTRONISCHE INSTRUMENTATION

BS7

Tachometer- Testmodul.

The Tachometer Test Module "BS-7" has been designed to teach linear and angular speed measurement techniques. In this module placed on the upper part we have a miniature motor used to move the axle. The motor speed can be changed adjusting the...

Available

6.1.2.1.- SENSOREN UND ELEKTRONISCHE INSTRUMENTATION

BS8

Nässe- Testmodul.

This Module has been designed to teach techniques to detect the proximity of objects, focusing on the distance at which each sensor is able to detect the object and the type of material it can detect.In the upper part there is a revolving disc on...

Available

6.1.2.1.- SENSOREN UND ELEKTRONISCHE INSTRUMENTATION

BS9

Pneumatik- Testmodul

The Pneumatics Test Module "BS-9" has been designed to teach techniques of control and handling of a pneumatic piston.All connections of the different BS-9 mechanisms will have output through a group of 2 mm. terminals. They are placed in the...

COMPUTER CONTROLLED BASIC UNIT FOR BS - BSPC

BSPC

Available

6.1.2.1.- SENSOREN UND ELEKTRONISCHE INSTRUMENTATION

BSPC

Computergesteuerte Basiseinheit.

This unit is common for the different test modules type "BS", and can work with one or several modules. The BSPC is a complete unit designed to provide signal conditioning for many sensors and transducers output signals that must be conditioned...

COMPUTER CONTROLLED TEACHING UNIT FOR THE STUDY OF ANALOG/DIGITAL AND DIGITAL/ANALOG CONVERTERS - CADDA

CADDA

Available

14.2.1.3.- DIGITALE ELEKTRONIK

CADDA

Computergesteuerte Unterrichtseinheit zum Studium von Analog/Digital- und Digital/Analog-Wandlern

"CADDA" unit has been designed to help the students to learn how to perform the most common procedures and study the different circuits used to convert analog signals in a digital signals and viceversa.The unit also allows the user to study in...

TRAINER FOR FIELD BUS APPLICATIONS - CEAB

CEAB

Available

6.1.1.2.- INDUSTRIELLE STEUERGERÄTE

CEAB

Trainer für Feldbusanwendungen.

The Trainer for Field Bus Applications, "CEAB", provides the components to conform a real Profibus DP Network where the PC is the master device and different components included with the unit are the slave devices. The "CEAB" unit also allows to...

COMPUTER CONTROLLED CONTROLLER TUNING UNIT - CEAC

CEAC

Available

6.1.1.2.- INDUSTRIELLE STEUERGERÄTE

CEAC

Reglereinstellungstrainer.

The Computer Controlled Controller Tuning Unit, "CEAC", provides the tools to simulate different industrial processes in a HIL system and control them with a commercial industrial controller. The CEAC unit works in conjunction with a computer, in...

CECI

Available

6.1.1.2.- INDUSTRIELLE STEUERGERÄTE

CECI

Trainer für industrielle Steuerungen

The Industrial Controllers Unit, "CECI", is based on a modular design structure whose functionality is divided into different modules toallow the student a better understanding of the unit. The modules included in the unit are: industrial...

INDUSTRIAL CONTROLLERS NETWORKING - CRCI

CRCI

Available

6.1.1.2.- INDUSTRIELLE STEUERGERÄTE

CRCI

Industrielle Steuerungsnetzwerke

The Industrial Controllers Networking, "CRCI", unit is based on a modular design structure whose functionality is divided into different modules to allow the student a better understanding of the unit. The modules provided with the unit are: two...

EDIBON DATA ACQUISITION SYSTEM (250.000 SAMPLES PER SECOND) - EDAS/VIS-0.25

EDAS/VIS-0.25

Available

2.1.- STROMVERSORGUNG, MESSGERÄTE UND ZUBEHÖR

EDAS/VIS-0.25

EDIBON Data Acquisition System (250.000 samples per second)

COMPUTER CONTROLLED THREE DIMENSIONS (3D) PHYSICS SYSTEM: - EFAC

EFAC

Available

1.1.- 3D-PHYSIK

EFAC

Computergesteuerte dreidimensionale (3D) Physiksysteme :

This equipments set integrated in the group of Phyisics-3D, tries to give a real vision of many of the basic physical processes which help to the understanding of the most complex physical processes.

FACO

Available

2.1.- STROMVERSORGUNG, MESSGERÄTE UND ZUBEHÖR

FACO

Netzgerät

Using this system training and practices can be done conventionally. This is the most common power supply used.

SET FOR ELECTRICAL FIELDS APPLICATION - FCE

Available

1.1.- 3D-PHYSIK

FCE

Set für die Anwendung bei elektrischen Feldern.

The Set for Electrical Filds application, "FCE" has a robot arm to which a probe is coupled, this probe can measure the intensity of the static and dynamic electric field. The control software, together with the data acquisition card, allows to do...

SET FOR MAGNETIC FIELDS APPLICATION - FCM

Available

1.1.- 3D-PHYSIK

FCM

Set for Magnetic Fields application

The basis of the "FCM", Set for the Application of Magnetic Fields, is to systematically measure the components of the magnetic field in space. For this purpose, the computer-controlled robot arm sweeps a region of space measuring the intensity of...

Available

1.1.- 3D-PHYSIK

FUB

Grundstruktur und Roboter

BASIC ELECTRONICS AND ELECTRICITY LABORATORY: - LIEBA

LIEBA

Available

14.2.1.6.- LEISTUNGSELEKTRONIK

LIEBA

Integriertes Basiselektronik und -stromlaboratorium:

We present a flexible and modular-based system for learning basic electronics, basic electricity and circuit theory. The advantage given by this learning and teaching system is that the student establishes his own rhythm, thus rendering...

Available

2.3.5.- INSTRUMENTATION & KONTROLLE

M41

Widerstandsgeber

This module enables to carry out different practices related with variable resistance transducers. The module has five different types of transducers: PTC, NTC, LDR, strain gauge and RTD.On the chassis there are a lamp, a heater and the sensors....

Available

14.2.1.5.- INSTRUMENTATION & KONTROLLE

M44

Einwirkung von Licht

This module enables to carry out different practices related with the light intensity measurement. The module has five different types of light sensors: photodiode, phototransistor, photovoltaic cell, light dependent resistor and infrared...

Available

14.2.1.5.- INSTRUMENTATION & KONTROLLE

M45

Lineare Position und Kraft

This module enables to carry out different practices related with linear position and force sensors.

Available

14.2.1.5.- INSTRUMENTATION & KONTROLLE

M46

Umweltmesstechnik

This module enables to carry out different practices related with variable environmental transducers. The module has different types of sensors: humidity sensor, pressure transducer, air speed sensor and temperature sensor.On the chassis there are...

ROTATIONAL SPEED & POSITION CONTROL - M47

Available

14.2.1.5.- INSTRUMENTATION & KONTROLLE

M47

Drehzahl- und Positionssteuerung

This module has a DC motor. The motor speed can be changed adjusting the voltage delivered to the actuator motor.The available sensors on the module are:Slot optical sensor.Inductive sensor.Infrared Reflective sensor.Hall effect sensor.Encoder...

Available

14.2.1.5.- INSTRUMENTATION & KONTROLLE

M48

Tonmessungen

This module enables to carry out different practices related with variable sound measures. The module has three different types of components: two kind of microphones and a loudspeaker.

APPLICATIONS OF TEMPERATURE AND PRESSURE - M49

Available

14.2.1.5.- INSTRUMENTATION & KONTROLLE

M49

Einwirkung von Temperatur und Druck

Available

14.2.1.3.- DIGITALE ELEKTRONIK

M60

Analog- Digital- Wandler

Available

14.2.1.3.- DIGITALE ELEKTRONIK

M61

Digital- Analog- Wandler

COMPUTER CONTROLLED TEACHING UNIT FOR THE STUDY OF REGULATION AND CONTROL - RYC

Available

6.1.1.1.- THEORETISCH-PRAKTISCHE GRUNDLAGEN

RYC

Computergesteuerte Unterrichtseinheit für das Studium der Regulierung und Kontrolle

Regulation and control theory is divided into two major divisions in, namely, classical and modern. The implementation of classical controller designs as compared to systems designed using modern control theory is easier and these controllers are...

RYC-BB

Available

6.1.1.1.- THEORETISCH-PRAKTISCHE GRUNDLAGEN

RYC-BB

Ball and Beam Module

The "RYC-BB" Ball and Beam module has been designed to study a practical control system, through the study of a classical control system, the Ball and Beam Control system.The "RYC-BB" module consists of two main components: the "RYC-BB" apparatus...

RYC-C

Available

6.1.1.1.- THEORETISCH-PRAKTISCHE GRUNDLAGEN

RYC-C

Flow Rate Control Module

The "RYC-C" Flow Rate Control module has been designed to study a practical control system, through the flow rate of a close water circuit.The "RYC-C" module consists of two main components: the "RYC-C" apparatus and the "RYC-C" interface box. The...

MAGNETIC LEVITATION CONTROL MODULE - RYC-CLM

RYC-CLM

Available

6.1.1.1.- THEORETISCH-PRAKTISCHE GRUNDLAGEN

RYC-CLM

Magnetic Levitation Control Module

The "RYC-CLM" Magnetic Levitation Control module has been designed to study a practical control system.The "RYC-CLM" module consists of two main components: the "RYC-CLM" apparatus and the "RYC-CLM" interface box. The "RYC-CLM" apparatus contains...

RYC-CP

Available

6.1.1.1.- THEORETISCH-PRAKTISCHE GRUNDLAGEN

RYC-CP

Position Control Module

The "RYC-CP" Position Control module has been designed to study a practical control system, through the control of a linear position system.The "RYC-CP" module consists of two main components: the "RYC-CP" apparatus and the "RYC-CP" interface box....

RYC-I

Available

6.1.1.1.- THEORETISCH-PRAKTISCHE GRUNDLAGEN

RYC-I

Luminosity Control Module

The "RYC-I" Luminosity Control module has been designed to study a practical control system and study different light sensors, through the luminosity control with three different light sensors.The "RYC-I" module consists of two main components:...

RYC-N

Available

6.1.1.1.- THEORETISCH-PRAKTISCHE GRUNDLAGEN

RYC-N

Level Control Module

The "RYC-N" Level Control module has been designed to study a practical control system, through the control of the water level of a tank.The "RYC-N" module consists of two main components: the "RYC-N" apparatus and the "RYC-N" interface box. The...

RYC-P

Available

6.1.1.1.- THEORETISCH-PRAKTISCHE GRUNDLAGEN

RYC-P

Pressure Control Module

The "RYC-P" Pressure Control module has been designed to study a practical control system, through the control of the air pressure level of an air pressure tank.The "RYC-P" module consists of two main components: the "RYC-P" apparatus and the...

RYC-pH

Available

6.1.1.1.- THEORETISCH-PRAKTISCHE GRUNDLAGEN

RYC-pH

pH Control Module

The "RYC-pH" pH Control module has been designed to study a practical control system, through the pH dissolution control in a stirred tank.The "RYC-pH" module consists of two main components: "RYC-pH" apparatus and "RYC-pH" interface box. The...

INVERTED PENDULUM CONTROL MODULE - RYC-PI

RYC-PI

Available

6.1.1.1.- THEORETISCH-PRAKTISCHE GRUNDLAGEN

RYC-PI

Inverted Pendulum Control Module

The "RYC-PI" Inverted Pendulum Control module has been designed to study a practical control system, through the control of a linear position system of movable cart.The "RYC-PI" module consists of two main components: the "RYC-PI" apparatus and...

RYC-SM

Available

6.1.1.1.- THEORETISCH-PRAKTISCHE GRUNDLAGEN

RYC-SM

DC Servo Motor Module

The "RYC-SM" Servo Motor module has been designed to study a practical control system, through the control of the position and speed of a DC Servo Motor.The "RYC-SM" module consists of two main components: the "RYC-SM" apparatus and the "RYC-SM"...

RYC-T

Available

6.1.1.1.- THEORETISCH-PRAKTISCHE GRUNDLAGEN

RYC-T

Temperature Control Module

The "RYC-T" Temperature Control module has been designed to study a practical control system, through the control of the water temperature in a tank.The "RYC-T" module consists of two main components: the "RYC-T" apparatus and the "RYC-T"...

RYC-TAG

Available

6.1.1.1.- THEORETISCH-PRAKTISCHE GRUNDLAGEN

RYC-TAG

Water Flow Temperature Control Module

The "RYC-TAG" Water Flow Temperature Control module has been designed to study a practical control system, through the control of water flow temperature.The "RYC-TAG" module consists of two main components: the "RYC-TAG" apparatus and the...

AIR FLOW TEMPERATURE CONTROL MODULE - RYC-TAR

RYC-TAR

Available

6.1.1.1.- THEORETISCH-PRAKTISCHE GRUNDLAGEN

RYC-TAR

Air Flow Temperature Control Module

The "RYC-TAR" Air Flow Temperature Control module has been designed to study a practical control system, through the control of an air flow temperature.The "RYC-TAR" module consists of two main components: the "RYC-TAR" apparatus and the "RYC-TAR"...

BASIC TEACHING UNIT FOR THE STUDY OF REGULATION AND CONTROL - RYC/B

RYC/B

Available

6.1.1.1.- THEORETISCH-PRAKTISCHE GRUNDLAGEN

RYC/B

Grundlegende Unterrichtseinheit für das Studium der Regulierung und Kontrolle

The Basic Teaching Unit for the Study of Regulation and Control, "RYC/B", allows the user to learn the basics about regulation and control of first and second order systems.This unit enables to carry a set of practices related with basic...

TRANSDUCERS AND INSTRUMENTATION TRAINER - SAIT

SAIT

Available

6.1.2.1.- SENSOREN UND ELEKTRONISCHE INSTRUMENTATION

SAIT

Transducers and Instrumentation Unit

The SAIT Trainer is designed to show most of the devices used in the industry that allow the electronic systems to communicate with the real world, to measure physical variables and to control industrial processes.It is a trainer with a logical...

PRESSURE SENSORS CALIBRATION SYSTEM - SCSP

SCSP

Available

14.2.2.- INSTRUMENTATION & KONTROLLE

SCSP

Drucksensor- Kalibrierungssystem

The Pressure Sensors Calibration System, "SCSP", is mainly composed of two pressure manometers on one hand, one measuring up to 1000 millimeters of water or 100 millibars and the other one measuring up to 2.5 bars and on the other hand, two vacuum...

WEIGHING SYSTEM, WITH COMPUTER DATA ACQUISITION - SPC

Available

14.2.2.- INSTRUMENTATION & KONTROLLE

SPC

Computergesteuertes Wiegesystem

The Weighing System, with Computer Data Acquisition "SPC" consist of a digital force meter that allows to determine both the mass and weight of a body (traction) as well as to determine compression forces.It has different adaptors according to the...

COMPUTER CONTROLLED TEACHING UNIT FOR THE STUDY OF DIGITAL SIGNAL PROCESSING - TDS

Available

14.2.1.3.- DIGITALE ELEKTRONIK

TDS

Computergesteuerte Lehreinheit zum Erlernen der digitalen Signalverarbeitung

The Teaching Unit for the Study of Digital Signal Processing "TDS" allows to study the principles and more important concepts about digital signal processing, including study and practical exercises, among others, of:Continuous waveforms...

COMPUTER CONTROLLED TEACHING UNIT FOR THE STUDY OF POWER ELECTRONICS (WITH IGBTS) - TECNEL

TECNEL

Available

6.1.2.2.- LEISTUNGSELEKTRONIK UND INDUSTRIELLE ELEKTRONIK

TECNEL

Computergesteuerte Lehreinheit zum Erlernen von Leistungselektronik (mit IGBTS)

The Computer Controlled Teaching Unit for the Study of Power Electronics (with IGBTS), "TECNEL" is a unit with Computer Control and Data Acquisition System designed to study the basis of Power Electronics. It allows students to study AC/DC, DC/AC,...

COMPUTER CONTROLLED PROCESS CONTROL UNIT FOR THE STUDY OF PRESSURE (AIR) - UCP-P

UCP-P

Available

6.1.1.3.- INDUSTRIELLE SYSTEMANWENDUNGEN

UCP-P

Prozesssteuerungsgerät für das Studieren des Drucks (Luft), computergesteuert

The Computer Controlled Process Control Unit for the Study of Pressure (Air), "UCP-P", consists of a compressed air duct whose flow is controlled by a pneumatic valve (the compressed air or gas source is not included). The air is supplied through...

QUALITÄT

KUNDENDIENST

FÜR WEITERE INFORMATIONEN, KONTAKTIEREN SIE UNS