2.- ELEKTRONIK

Elektronik ist der Zweig der Physik, der sich auf das Verhalten von Elektronen konzentriert. In der Technik ist Elektronik der Teil, der elektronische Schaltkreise studiert und entwickelt, so dass die durch sie zirkulierenden Elektronen das von den Spezifikationen der Anwendung geforderte Verhalten haben.

Mehr sehen

Elektronik war im 20. Jahrhundert eine der am weitesten entwickelten Disziplinen, die von einer sehr begrenzten Anwendung als Stromversorgung zu einem großen Einfluss auf die Gesellschaft geführt hat. Einige Beispiele für elektronische Schlüsselanwendungen zum Verständnis dieses großen Einflusses sind die Sensoren und Messgeräte aller Arten von physikalischen Größen wie Druckniveau, Durchflussniveau und Temperaturmessung, die Verwendung von elektronischen Verstärkern und Filtern, die Entwicklung von integrierten Schaltungen, Mikroprozessoren und persönlichen Computern, die Entwicklung von Transistoren von verschiedenen Technologien wie MOSFET, JFET, BJT, IGBT, usw.

Elektronikanwendungen sind nahezu endlos, und jedes Jahr werden neue Beiträge verbessert und hinzugefügt. Je nach Anwendung der elektronischen Schaltungen werden die folgenden Gruppen unterschieden: analoge Elektronik und digitale Elektronik je nachdem, ob binär oder analog signale verwendet werden, Leistungselektronik je nachdem, ob hohe elektrische Ströme und elektrische Spannungen verwendet werden, elektronische Instrumentierung je nachdem, ob sie für elektronische Messungen von physikalischen Grössen usw. Verwendet werden.

Die Zukunft der Elektronik konzentriert sich auf die Miniaturisierung von elektronischen Komponenten und erhöht deren Effizienz und Geschwindigkeit. In dieser Arbeit ist die Entdeckung revolutionärer neuer Materialien, wie z.B. Graphen oder Silizen von zentraler Bedeutung.

Siehe Produkte
Verwandte Materialien
ELEKTRONIK SUBCATEGORIES

2.1.- STROMVERSORGUNG, MESSGERÄTE UND ZUBEHÖR

Die elektronische Laborausrüstung ist der Satz von Instrumenten, der für die Durchführung der Experimente in einer praktischen Sitzung der Elektronik erforderlich ist. Die Eigenschaften der Ausrüstung hängen vom theoretischen Niveau des auszurüstenden Labors ab, sei es ein technisches Gymnasium,...
Sehen

2.2.- KITS FÜR DIE MONTAGE VON STROMKEISEN

Die elektronische Entwicklungsphase einer Vorrichtung ist eine Gruppe von Stufen, die durchgeführt wird, um ein Produkt zu erhalten, das die erforderlichen Spezifikationen erfüllt.Die charakteristischsten Phasen jeder Entwicklung elektronischer Geräte sind: Definition der Gerätespezifikationen,...
Sehen

2.3.- THEORETISCH - PRAKTISCHE GRUNDLAGEN

Die elektronischen Grundlagen sind die Gesamtheit der Kenntnisse, die darauf abzielen, dem Studenten eine solide Basis zu bieten, um die allgemeine Funktionsweise der gebräuchlichsten elektronischen Schaltungen und die individuelle Funktion der elektronischen Komponenten, aus denen sie sich...
Sehen

2.4.- INDUSTRIELLE ELEKTRONIK

Die Industrieelektronik ist ein Teilgebiet der Elektrotechnik, das sich mit elektronischen Systemen für den industriellen Einsatz befasst, d. h. mit elektronischen Geräten, die in der Industrie verwendet werden. Einer der wichtigsten Zweige der Industrieelektronik ist die Leistungselektronik, die...
Sehen

2.5.- AUTOMOBILELEKTRONIK

Automotive electronics is the branch of electronic engineering focused exclusively on the development of electrical and electronic systems specially designed to be installed in the car. All the systems developed in automotive electronics are adapted to withstand the harsh operation conditions in...
Sehen
ELEKTRONIK UNITS
91 - 120 von 122 Artikel(n)
TEMPERATURE CONTROL MODULE - RYC-TE
Available
6.1.1.1.- THEORETISCH-PRAKTISCHE GRUNDLAGEN
RYC-TE
Temperature Control Module
Zubehör von RYC, RYC/T
The "RYC-TE" Temperature Control module has been designed to study a practical control system, through the control of the water temperature in a tank.The "RYC-TE" module consists of two main components: the "RYC-TE" apparatus and the "RYC-TE"...
PRESSURE CONTROL MODULE - RYC-P
Available
6.1.1.1.- THEORETISCH-PRAKTISCHE GRUNDLAGEN
RYC-P
Pressure Control Module
Zubehör von RYC, RYC/T
The "RYC-P" Pressure Control module has been designed to study a practical control system, through the control of the air pressure level of an air pressure tank.The "RYC-P" module consists of two main components: the "RYC-P" apparatus and the...
LEVEL CONTROL MODULE - RYC-N
Available
6.1.1.1.- THEORETISCH-PRAKTISCHE GRUNDLAGEN
RYC-N
Level Control Module
Zubehör von RYC, RYC/T
The "RYC-N" Level Control module has been designed to study a practical control system, through the control of the water level of a tank.The "RYC-N" module consists of two main components: the "RYC-N" apparatus and the "RYC-N" interface box. The...
FLOW RATE CONTROL MODULE - RYC-C
Available
6.1.1.1.- THEORETISCH-PRAKTISCHE GRUNDLAGEN
RYC-C
Flow Rate Control Module
Zubehör von RYC, RYC/T
The "RYC-C" Flow Rate Control module has been designed to study a practical control system, through the flow rate of a close water circuit.The "RYC-C" module consists of two main components: the "RYC-C" apparatus and the "RYC-C" interface box. The...
LUMINOSITY CONTROL MODULE - RYC-I
Available
6.1.1.1.- THEORETISCH-PRAKTISCHE GRUNDLAGEN
RYC-I
Luminosity Control Module
Zubehör von RYC, RYC/T
The "RYC-I" Luminosity Control module has been designed to study a practical control system and study different light sensors, through the luminosity control with three different light sensors.The "RYC-I" module consists of two main components:...
PH CONTROL MODULE - RYC-pH
Available
6.1.1.1.- THEORETISCH-PRAKTISCHE GRUNDLAGEN
RYC-pH
pH Control Module
Zubehör von RYC, RYC/T
The "RYC-pH" pH Control module has been designed to study a practical control system, through the pH dissolution control in a stirred tank.The "RYC-pH" module consists of two main components: "RYC-pH" apparatus and "RYC-pH" interface box. The...
POSITION CONTROL MODULE - RYC-CP
Available
6.1.1.1.- THEORETISCH-PRAKTISCHE GRUNDLAGEN
RYC-CP
Position Control Module
Zubehör von RYC, RYC/T
The "RYC-CP" Position Control module has been designed to study a practical control system, through the control of a linear position system.The "RYC-CP" module consists of two main components: the "RYC-CP" apparatus and the "RYC-CP" interface box....
SERVOMOTOR INDUSTRIAL APPLICATION - AE-SMI
  • AE-SMI
Available
2.4.2.- ELEKTRISCHE SERVOMOTOREN
AE-SMI
Servomotor Industrial Application
The Servomotor Industrial Application, "AE-SMI", is designed to perform up to seven controls used in motion technology: position control,speed control, torque control, position and speed control, speed and torque control and the full-closed...
BRUSHLESS MOTOR INDUSTRIAL APPLICATION - AE-BMI
  • AE-BMI
Available
2.4.2.- ELEKTRISCHE SERVOMOTOREN
AE-BMI
Brushless Motor Industrial Application
The Brushless Motor Industrial Application, "AE-BMI", is designed to perform the most common control used in the industry: the position control. The "AE-BMI" application allows the student to configure up to four positions with all the parameters...
SERVOSYSTEMS BASIC UNIT FOR DC MOTORS - SERIN/CCB
  • SERIN/CCB
Available
6.1.2.2.- LEISTUNGSELEKTRONIK UND INDUSTRIELLE ELEKTRONIK
SERIN/CCB
Basistrainer für industrielle Servosysteme (DC- Motoren)
"SERIN/CCB" is an unit whose goal is studying low power servo systems. It is a low power DC motor speed control trainer that has a breakdown simulator. This trainer is a basic version of the Advanced and Computerised "SERIN/CC" Trainer, being...
1 KW AC INDUSTRIAL SERVOMOTOR APPLICATION - AEL-SERIN/CA-1KW
  • AEL-SERIN/CA-1KW
Available
6.1.2.2.- LEISTUNGSELEKTRONIK UND INDUSTRIELLE ELEKTRONIK
AEL-SERIN/CA-1KW
Anwendung von Industrie-Wechselstrom-Servomotoren mit 1 kW
The 1 kW AC Industrial Servomotor Application, "AEL-SERIN/CA-1KW", has been designed to study the working principle and control of industrial servomotors. The "AEL-SERIN/CA-1KW" allows the user to acquire knowlegde and experience in the control of...
POWER ELECTRONICS APPLICATION, WITH SCADA - AEL-PWEC
  • AEL-PWEC
Available
5.1.3.2.- KRAFTÜBERTRAGUNG
AEL-PWEC
Anwendung von Leistungselektronik, mit SCADA
The Power Electronics Application, with SCADA, "AEL-PWEC", has been designed to study the most important applications related to DC power electronics, single-phase AC power electronics, three-phase AC power electronics and thyristor power...
WIND POWER PLANTS WITH INDUCTION GENERATOR APPLICATION - AEL-WPPI
  • AEL-WPPI
Available
5.3.3.- WINDENERGIE
AEL-WPPI
Anwendung von Windkraftwerken mit Induktionsgenerator
The Wind Power Plants with Induction Generator Application, "AEL-WPPI", has been developed by EDIBON to study the wind turbines electrical performance with three-phase induction generators of squirrel cage that inject power in the network.Wind...
Informationen anfordern