2.- ELEKTRONIK

Elektronik ist der Zweig der Physik, der sich auf das Verhalten von Elektronen konzentriert. In der Technik ist Elektronik der Teil, der elektronische Schaltkreise studiert und entwickelt, so dass die durch sie zirkulierenden Elektronen das von den Spezifikationen der Anwendung geforderte Verhalten haben.

Mehr sehen

Elektronik war im 20. Jahrhundert eine der am weitesten entwickelten Disziplinen, die von einer sehr begrenzten Anwendung als Stromversorgung zu einem großen Einfluss auf die Gesellschaft geführt hat. Einige Beispiele für elektronische Schlüsselanwendungen zum Verständnis dieses großen Einflusses sind die Sensoren und Messgeräte aller Arten von physikalischen Größen wie Druckniveau, Durchflussniveau und Temperaturmessung, die Verwendung von elektronischen Verstärkern und Filtern, die Entwicklung von integrierten Schaltungen, Mikroprozessoren und persönlichen Computern, die Entwicklung von Transistoren von verschiedenen Technologien wie MOSFET, JFET, BJT, IGBT, usw.

Elektronikanwendungen sind nahezu endlos, und jedes Jahr werden neue Beiträge verbessert und hinzugefügt. Je nach Anwendung der elektronischen Schaltungen werden die folgenden Gruppen unterschieden: analoge Elektronik und digitale Elektronik je nachdem, ob binär oder analog signale verwendet werden, Leistungselektronik je nachdem, ob hohe elektrische Ströme und elektrische Spannungen verwendet werden, elektronische Instrumentierung je nachdem, ob sie für elektronische Messungen von physikalischen Grössen usw. Verwendet werden.

Die Zukunft der Elektronik konzentriert sich auf die Miniaturisierung von elektronischen Komponenten und erhöht deren Effizienz und Geschwindigkeit. In dieser Arbeit ist die Entdeckung revolutionärer neuer Materialien, wie z.B. Graphen oder Silizen von zentraler Bedeutung.

Siehe Produkte
Verwandte Materialien
ELEKTRONIK SUBCATEGORIES

2.1.- STROMVERSORGUNG, MESSGERÄTE UND ZUBEHÖR

Die elektronische Laborausrüstung ist der Satz von Instrumenten, der für die Durchführung der Experimente in einer praktischen Sitzung der Elektronik erforderlich ist. Die Eigenschaften der Ausrüstung hängen vom theoretischen Niveau des auszurüstenden Labors ab, sei es ein technisches Gymnasium,...
Sehen

2.2.- KITS FÜR DIE MONTAGE VON STROMKEISEN

Die elektronische Entwicklungsphase einer Vorrichtung ist eine Gruppe von Stufen, die durchgeführt wird, um ein Produkt zu erhalten, das die erforderlichen Spezifikationen erfüllt.Die charakteristischsten Phasen jeder Entwicklung elektronischer Geräte sind: Definition der Gerätespezifikationen,...
Sehen

2.3.- THEORETISCH - PRAKTISCHE GRUNDLAGEN

Die elektronischen Grundlagen sind die Gesamtheit der Kenntnisse, die darauf abzielen, dem Studenten eine solide Basis zu bieten, um die allgemeine Funktionsweise der gebräuchlichsten elektronischen Schaltungen und die individuelle Funktion der elektronischen Komponenten, aus denen sie sich...
Sehen

2.4.- INDUSTRIELLE ELEKTRONIK

Die Industrieelektronik ist ein Teilgebiet der Elektrotechnik, das sich mit elektronischen Systemen für den industriellen Einsatz befasst, d. h. mit elektronischen Geräten, die in der Industrie verwendet werden. Einer der wichtigsten Zweige der Industrieelektronik ist die Leistungselektronik, die...
Sehen

2.5.- AUTOMOBILELEKTRONIK

Automotive electronics is the branch of electronic engineering focused exclusively on the development of electrical and electronic systems specially designed to be installed in the car. All the systems developed in automotive electronics are adapted to withstand the harsh operation conditions in...
Sehen
ELEKTRONIK UNITS
61 - 90 von 122 Artikel(n)
OPTOELECTRONICS KIT - M14/KIT
Available
2.2.- KITS FÜR DIE MONTAGE VON STROMKEISEN
M14/KIT
Optoelektronik-Kit
Zubehör von M-KITS
With Optoelectronics Kit, "M14/KIT", designed by EDIBON, the main light emitters and liquid crystal displays (LCD), photoconductive cells, fibre optics, infrared, etc. can be studied.
ELECTRIC NETWORKS KIT - M16/KIT
Available
2.2.- KITS FÜR DIE MONTAGE VON STROMKEISEN
M16/KIT
Elektrische Netzwerk-Kit
Zubehör von M-KITS
With the Electric Networks Kit, "M16/KIT", designed by EDIBON, it is possible to understand the principles of Ohm’s Law, Norton’s and Thévenin’s Theorem, Wheatstone bridge operation, superposition theorems or star/delta transformation and viceversa.
THREE-PHASE CIRCUITS KIT - M18/KIT
Available
2.2.- KITS FÜR DIE MONTAGE VON STROMKEISEN
M18/KIT
Dreiphasen-Schaltungs-Kit
Zubehör von M-KITS
The Three-phase Circuits Kit, "M18/KIT", designed by EDIBON, is used to study the generation of three-phase systems, load balancing between phases, operation of three-phase rectifiers, etc.
COMPUTER CONTROLLED A/D AND D/A CONVERTERS UNIT - CADDA
  • CADDA
Available
14.2.1.3.- DIGITALE ELEKTRONIK
CADDA
Computergesteuerte A/D- und D/A-Wandlereinheit (PC)
The Computer Controlled A/D and D/A Converters Unit, "CADDA", unit has been designed to help the students to learn how to perform the most common procedures and study the different circuits used to convert analog signals in a digital signals and...
WEIGHING SYSTEM, WITH COMPUTER DATA ACQUISITION - SPC
  • SPC
Available
14.2.2.- INSTRUMENTATION & KONTROLLE
SPC
Computergesteuertes Wiegesystem
The Weighing System, with Computer Data Acquisition "SPC" consist of a digital force meter that allows to determine both the mass and weight of a body (traction) as well as to determine compression forces.It has different adaptors according to the...
PRESSURE SENSORS CALIBRATION SYSTEM - SCSP
  • SCSP
Available
14.2.2.- INSTRUMENTATION & KONTROLLE
SCSP
Drucksensor- Kalibrierungssystem
The Pressure Sensors Calibration System, "SCSP", is mainly composed of two pressure manometers on one hand, one measuring up to 1000 millimeters of water or 100 millibars and the other one measuring up to 2.5 bars and on the other hand, two vacuum...
MODULAR SYSTEM FOR THE STUDY OF SENSORS: - BS
  • BS
Available
6.1.2.1.- SENSOREN UND ELEKTRONISCHE INSTRUMENTATION
BS
Modulares System für die Sensorstudie
The Modular System for the Study of Sensors, "BS", designed by EDIBON, includes a wide range of units that include different electronic components designed to control the signal produced by the transducers (sensors and actuators) on the one hand,...
COMPUTER CONTROLLED BASIC UNIT FOR BS - BSPC
  • Zubehör von BS
Available
6.1.2.1.- SENSOREN UND ELEKTRONISCHE INSTRUMENTATION
BSPC
Basis-Einheit für BS, Computergesteuert (PC)
Zubehör von BS
The BSPC is a complete unit designed to provide signal conditioning for many sensors and transducers output signals that must be conditioned before a data acquisition system can effectively and accurately acquire the signal. These circuits consist...
BASE UNIT FOR BS - BSUB
  • Zubehör von BS
Available
6.1.2.1.- SENSOREN UND ELEKTRONISCHE INSTRUMENTATION
BSUB
Basis-Einheit für BS
Zubehör von BS
The BSUB is a complete unit designed to provide signal conditioning for many sensors and transducers output signals that must be conditioned. These circuits consist of differential and instrumentation amplifiers, filters, current to voltage and...
VIBRATIONS AND/OR DEFORMATIONS TEST MODULE - BS1
  • Zubehör von BS
Available
6.1.2.1.- SENSOREN UND ELEKTRONISCHE INSTRUMENTATION
BS1
Modul für Schwingungs- und/oder Deformationsprüfungen
Zubehör von BS
Vibrations and/or Deformations Test Module, "BS1" has been designed to teach mechanical vibration and displacement variable measurement techniques.On the upper side of the test module there is a girder or elastic/vibrant sheet that is the one...
TEMPERATURE TEST MODULE - BS2
  • Zubehör von BS
Available
6.1.2.1.- SENSOREN UND ELEKTRONISCHE INSTRUMENTATION
BS2
Modul für Temperaturprüfungen
Zubehör von BS
The Temperature Test Module, "BS2", has been designed to teach the use and applications of sensors of temperature as a measure, and its control.We have a half-open space in whose interior there are two lamps that are going to heat that space....
PRESSURE TEST MODULE - BS3
  • Zubehör von BS
Available
6.1.2.1.- SENSOREN UND ELEKTRONISCHE INSTRUMENTATION
BS3
Modul für Druckprüfungen
Zubehör von BS
The Pressure Test Module, "BS3", has been designed to teach the use and applications of this kind of sensors measurement systems. It shows the different pressure measurement techniques. On the left upper side of the module there is a pressure...
FLOW TEST MODULE - BS4
  • Zubehör von BS
Available
6.1.2.1.- SENSOREN UND ELEKTRONISCHE INSTRUMENTATION
BS4
Modul für Durchflussprüfungen
Zubehör von BS
The objective of Flow Test Module, "BS4", is to show techniques to measure changeable fluids.The module is made up of two tanks assembled on a structure. In one of them there is a pumping system that allows to pump the water from the reserve tank,...
OVENS TEST MODULE - BS5
  • Zubehör von BS
Available
6.1.2.1.- SENSOREN UND ELEKTRONISCHE INSTRUMENTATION
BS5
Modul für Ofenprüfungen
Zubehör von BS
With the Ovens Test Module, "BS5", is possible to study temperature measurement techniques using several kinds of sensors placed inside the sealed place that is used as oven.This module is basically made up of an oven that contains a changeable...
LIQUID LEVEL TEST MODULE - BS6
  • Zubehör von BS
Available
6.1.2.1.- SENSOREN UND ELEKTRONISCHE INSTRUMENTATION
BS6
Modul für Flüssigkeitsstandsprüfungen
Zubehör von BS
The Liquid level Test Module, "BS6", has been designed to teach the use and applications of level sensors and their measurement systems. This module teaches techniques to measure and control the liquid level in a tank.On this there is a two tanks...
TACHOMETER TEST MODULE - BS7
  • Zubehör von BS
Available
6.1.2.1.- SENSOREN UND ELEKTRONISCHE INSTRUMENTATION
BS7
Modul für Drehzahlmesserprüfungen
Zubehör von BS
The Tachometer Test Module, "BS7", has been designed to teach linear and angular speed measurement techniques. In this module placed on the upper part we have a miniature motor used to move the axle. The motor speed can be changed adjusting the...
PROXIMITY TEST MODULE - BS8
  • Zubehör von BS
Available
6.1.2.1.- SENSOREN UND ELEKTRONISCHE INSTRUMENTATION
BS8
Modul für Näherungssensorprüfungen
Zubehör von BS
The Proximity Test Module, "BS8", has been designed to teach techniques to detect the proximity of objects, focusing on the distance at which each sensor is able to detect the object and the type of material it can detect. In the upper part there...
PNEUMATIC TEST MODULE - BS9
  • Zubehör von BS
Available
6.1.2.1.- SENSOREN UND ELEKTRONISCHE INSTRUMENTATION
BS9
Modul für Pneumatikprüfungen
Zubehör von BS
The Pneumatics Test Module, "BS9", has been designed to teach techniques of control and handling of a pneumatic piston.All connections of the different BS9 mechanisms will have output through a group of 2 mm. terminals. They are placed in the...
LIGHT TEST MODULE - BS10
  • Zubehör von BS
Available
6.1.2.1.- SENSOREN UND ELEKTRONISCHE INSTRUMENTATION
BS10
Modul für Beleuchtungsprüfungen
Zubehör von BS
The objective of the Light Test Module, "BS10", is to show some of the techniques used to measure light or illumination intensity.The module is equipped with a lamp whose light intensity can be controlled by the variation of the voltage...
TRANSDUCERS AND INSTRUMENTATION UNIT - SAIT
  • SAIT
Available
6.1.2.1.- SENSOREN UND ELEKTRONISCHE INSTRUMENTATION
SAIT
Transducers and Instrumentation Unit
The Transducers and Instrumentation Unit, "SAIT", has been designed by EDIBON to show most of the devices used in the industry that allow the electronic systems to communicate with the real world, to measure physical variables and to control...
COMPUTER CONTROLLED MODULAR CONTROL AND REGULATION UNIT - RYC/T
  • RYC/T
Available
10.1.- THEORETISCH - PRAKTISCHE GRUNDLAGEN
RYC/T
Computer Controlled Modular Control and Regulation Unit
Regulation and control theory is divided into two major divisions in, namely, classical and modern. The implementation of classical controller designs as compared to systems designed using modern control theory is easier and these controllers are...
BALL AND BEAM MODULE - RYC-BB
Available
6.1.1.1.- THEORETISCH-PRAKTISCHE GRUNDLAGEN
RYC-BB
Ball and Beam Module
Zubehör von RYC, RYC/T
The "RYC-BB" Ball and Beam module has been designed to study a practical control system, through the study of a classical control system, the Ball and Beam Control system.The "RYC-BB" module consists of two main components: the "RYC-BB" apparatus...
DC SERVO MOTOR MODULE - RYC-SM
Available
6.1.1.1.- THEORETISCH-PRAKTISCHE GRUNDLAGEN
RYC-SM
DC Servo Motor Module
Zubehör von RYC, RYC/T
The "RYC-SM" Servo Motor module has been designed to study a practical control system, through the control of the position and speed of a DC Servo Motor.The "RYC-SM" module consists of two main components: the "RYC-SM" apparatus and the "RYC-SM"...
AIR FLOW TEMPERATURE CONTROL MODULE - RYC-TAR
Available
6.1.1.1.- THEORETISCH-PRAKTISCHE GRUNDLAGEN
RYC-TAR
Air Flow Temperature Control Module
Zubehör von RYC, RYC/T
The "RYC-TAR" Air Flow Temperature Control module has been designed to study a practical control system, through the control of an air flow temperature.The "RYC-TAR" module consists of two main components: the "RYC-TAR" apparatus and the "RYC-TAR"...
INVERTED PENDULUM CONTROL MODULE - RYC-PI
Available
6.1.1.1.- THEORETISCH-PRAKTISCHE GRUNDLAGEN
RYC-PI
Inverted Pendulum Control Module
Zubehör von RYC, RYC/T
The "RYC-PI" Inverted Pendulum Control module has been designed to study a practical control system, through the control of a linear position system of movable cart.The "RYC-PI" module consists of two main components: the "RYC-PI" apparatus and...
MAGNETIC LEVITATION CONTROL MODULE - RYC-CLM
Available
6.1.1.1.- THEORETISCH-PRAKTISCHE GRUNDLAGEN
RYC-CLM
Magnetic Levitation Control Module
Zubehör von RYC, RYC/T
The "RYC-CLM" Magnetic Levitation Control module has been designed to study a practical control system.The "RYC-CLM" module consists of two main components: the "RYC-CLM" apparatus and the "RYC-CLM" interface box. The "RYC-CLM" apparatus contains...
WATER FLOW TEMPERATURE CONTROL MODULE - RYC-TAG
Available
6.1.1.1.- THEORETISCH-PRAKTISCHE GRUNDLAGEN
RYC-TAG
Water Flow Temperature Control Module
Zubehör von RYC, RYC/T
The "RYC-TAG" Water Flow Temperature Control module has been designed to study a practical control system, through the control of water flow temperature.The "RYC-TAG" module consists of two main components: the "RYC-TAG" apparatus and the...
Informationen anfordern