AE-PLC-SMOLD 模具成型工作站

6.2.5.2.- 过程工作站的应用
MOLDING WORKSTATION - AE-PLC-SMOLD

創新系統

The Molding Workstation, "AE-PLC-SMOLD", has been designed by EDIBON to study the Automatic molding machines of the computer integrated manufacturing systems.

查看一般說明

扩展

ICAI

交互式计算机辅助教学软件

相關新聞

EDIBON and its commitment to European Skills
EDIBON and its commitment to European Skills
At EDIBON, we are committed to strengthening skills as a strategic pillar for the competitiveness and social well-being of the European Union. Proper training not only boosts the economy but also enables individuals to fully participate in society and democracy.
阅读更多

一般說明

The Molding Workstation, "AE-PLC-SMOLD", designed by EDIBON, is an automatic molding workstation commanded by a PLC. The "AE-PLC-SMOLD" also include a conveyor system to transport the incoming pieces to the molding zone where the unit simulate a molding process by punching the piece with three pneumatic actuators.

The "AE-PLC-SMOLD" workstation has been designed as a modular system to facilitate the understanding of the unit operation.

The main components are:

  • The PLC: is composed by the CPU limit and all extra modules needed to perform a corrent working of the workstation and all the extra modules needed to perform a correct working of the workstation.
  • The Control Panel: with start/stop button, emergency pushbutton, reset button, light indicators to show current state of the process, etc.
  • The Pneumatic Circuit: contains the required solenoid valves, the pressure components, the filters and regulators to assure the appropriate working of the unit.
  • The Workstation: it is composed by real industrial components used by the rotary table systems such as reed sensors, presence sensors, DC motor, inductive sensors, rotary table with 8 positions, etc.

The "AE-PLC-SMOLD" is an independent workstation that can work alone and/or in conjunction with other workstation to make up a complete Flexible Manufacturing System (*).

*The Flexible manufacturing systems product list is available at the "6.- MECHATRONICS and AUTOMATION" area.

練習和指導練習

手册中包含的指导实践练习

  1. Introduction to flexible manufacturing system (FMS).
  2. Introduction to pneumatics and electro-pneumatics.
  3. Introduction to vacuum technology.
  4. Study of the sensor detection.
  5. Configuration of a pneumatic application.
  6. Manual control of a molding system.
  7. Automatic control of a molding system.
  8. Change the parameters of the molding process.
  9. Optimization of the process time.
  10. Study and analysis of the faults inserted in the process with the fault generation module.

所需物品

推荐的其他项目

可用的类似设备

FILTRATION WORKSTATION - AE-PLC-FT
  • AE-PLC-FT
Available
6.2.5.2.- 过程工作站的应用
AE-PLC-FT
过滤工作站
The "AE-PLC-FT" is a filtration system commanded by a PLC. The "AE-PLC-FT" is composed of two tanks with a filter between them. The liquids are pumped from the first tank into the second tank through the filter using a pump and different types of...
查看单位
MIXING WORKSTATION - AE-PLC-MS
  • AE-PLC-MS
Available
6.2.5.2.- 过程工作站的应用
AE-PLC-MS
混合工作站
The "AE-PLC-MS" is a mixing system commanded by a PLC. The "AE-PLC-MS" is composed of three tanks with different liquids. These liquids are pumped and mixed in a reactor vessel using a pump and different valves. The system is equipped with flow...
查看单位
PUNCHING WORKSTATION - AE-PLC-PHD
  • AE-PLC-PHD
Available
6.2.5.2.- 过程工作站的应用
AE-PLC-PHD
冲压工作站
The "AE-PLC-PHD" is a processing workstation commanded by a PLC. This unit takes a piece and introduces it inside the punching zone that is protected with a polycarbonate screen. Once the piece is inside the punching zone, the hydraulic punching...
查看单位
FILLING WORKSTATION - AE-PLC-FS
  • AE-PLC-FS
Available
6.2.5.2.- 过程工作站的应用
AE-PLC-FS
加注工作站
The "AE-PLC-FS" is a filling system commanded by a PLC. The workstation detects the bottles that arrive on a conveyor belt to the filling position and pumps liquids from a reservoir tank into the bottles using a pump and different types of valves....
查看单位
CORKING WORKSTATION - AE-PLC-CRS
  • AE-PLC-CRS
Available
6.2.5.2.- 过程工作站的应用
AE-PLC-CRS
塞盖工作站
The "AE-PLC-CRS" is a corking system commanded by a PLC. The workstation detects the bottles that arrives on a conveyor belt to the corking position and closes them with a cap using a pressing cylinder. The "AE-PLC-CRS" also includes different...
查看单位
BOTTLE OPENING WORKSTATION - AE-PLC-APB
  • AE-PLC-APB
Available
6.2.5.2.- 过程工作站的应用
AE-PLC-APB
罐子开盖工作站
The "AE-PLC-APB" is a bottles opening system commanded by a PLC. The unit is equipped with different containers and a retention system based on a cylinder, in order to allow the Robotic Arm Workstation "AE-BR" or the SCARA Arm Workstation "AE-SCA"...
查看单位
MOUNTING WORKSTATION - AE-PLC-M
  • AE-PLC-M
Available
6.2.5.2.- 过程工作站的应用
AE-PLC-M
装配工作站
The "AE-PLC-M" is a mounting workstation commanded by a PLC that provides pieces to the system and mount them inside of the base pieces.The "AE-PLC-M" keeps the pieces in a vertical storage. The workstation take the pieces one by one, the quality...
查看单位
AUTOMATIC PRESSING WORKSTATION - AE-PLC-P
  • AE-PLC-P
Available
6.2.5.2.- 过程工作站的应用
AE-PLC-P
自动压机工作站
The "AE-PLC-P" is an automatic pressing workstation commanded by a PLC. The "AE-PLC-P" moves the pieces from the input zone tothe pressing zone, once the piece is detected in the pressing zone, the "AE-PLC-P" emulates pressing the pieces with a...
查看单位
AUTOMATIC SCREW WORKSTATION - AE-PLC-AT
  • AE-PLC-AT
Available
6.2.5.2.- 过程工作站的应用
AE-PLC-AT
自动拧紧工作站
The Automatic Screwdriving Workstation, "AE-PLC-AT", designed by EDIBON, is an automatic screw workstation commanded by a PLC that supply and mount four screws in a piece.The "AE-PLC-AT" keeps the screws in a vertical storage. The workstation take...
查看单位
BOTTLING WORKSTATION - AE-PLC-MEMB
  • AE-PLC-MEMB
Available
6.2.5.2.- 过程工作站的应用
AE-PLC-MEMB
装瓶工作站
The Bottling Workstation, "AE-PLC-MEMB", designed by EDIBON, is an automatic rotary table with a vessel feeding system, a controlled water filling system, a cap feeder, a vessel closing system, and finally, an extraction system to a complete...
查看单位
LABELLING WORKSTATION - AE-PLC-MET
  • AE-PLC-MET
Available
6.2.5.2.- 过程工作站的应用
AE-PLC-MET
标签工作站
The "AE-PLC-MET" is an automatic labelling machine commanded by a PLC. The "AE-PLC-MET" also include a transporting system that carries the incoming bottles to the labelling zone, supplying the bottles one by one.The "AE-PLC-MET" workstation is...
查看单位
DRILLING WORKSTATION - AE-PLC-ST
  • AE-PLC-ST
Available
6.2.5.2.- 过程工作站的应用
AE-PLC-ST
钻孔工作站
The Drilling Workstation, "AE-PLC-ST", designed by EDIBON, is an automatic drilling workstation commanded by a PLC. The "AE-PLC-ST" also include a conveyor system to transport the incoming pieces to the drilling zone where the drilling machine...
查看单位
CUTTING WORKSTATION - AE-PLC-SCOR
  • AE-PLC-SCOR
Available
6.2.5.2.- 过程工作站的应用
AE-PLC-SCOR
切割工作站
The Cutting Workstation "AE-PLC-SCOR", designed by EDIBON, is an automatic cutting workstation commanded by a PLC. The "AE-PLC-SCOR" also includes a conveyor system to transport the incoming pieces to the cutting zone where the cutting machine...
查看单位
CONTROL PROCESSES WORKSTATION - AE-PLC-CP
  • AE-PLC-CP
Available
6.2.5.2.- 过程工作站的应用
AE-PLC-CP
过程控制工作站
The Process Control Workstation, "AE-PLC-CP", designed by EDIBON, is a process control workstation commanded by a PLC that coordinates.The "AE-PLC-CP" workstation is designed as a modular system to facilitate the understanding of the unit.The main...
查看单位

質量

售後服務

要求信息