6.2.5.- PLC的工作站应用

PLC的工作站应用 UNITS

Showing 1-30 of 43 item(s)

AE-PLC-APS

Available

6.2.5.1.- 零件进给工作站的应用

AE-PLC-APS

工作站零件供料

The Pieces Feeder Workstation, "AE-PLC-APS", is a unit that works with pneumatics and electro-pneumatics technologies.The function of the "AE-PLC-APS" is to supply pieces and to verify them, if they are acceptable.The pieces will be supplied one...

FEEDING WORKSTATION FOR PIECES - AE-PLC-A

AE-PLC-A

Available

6.2.5.1.- 零件进给工作站的应用

AE-PLC-A

工作站零件喂料

The "AE-PLC-A" is a feeder workstation commanded by a PLC that provides pieces to the system. The "AE-PLC-A" keeps the pieces in a vertical storage, the workstation take the pieces one by one and place at the quality control zone. The system...

MULTIPLE PIECES FEEDER WORKSTATION - AE-PLC-MA

AE-PLC-MA

Available

6.2.5.1.- 零件进给工作站的应用

AE-PLC-MA

工作站多零件供料

The Multiple Pieces Feeder Workstation, "AE-PLC-MA", designed by EDIBON, is a workstation commanded by a PLC, which provides three different types of pieces to be assembled in one piece by the industrial robot of the "AE-BR" unit.The "AE-PLC-MA"...

PIECES DISTRIBUTOR WORKSTATION - AE-PLC-DS

AE-PLC-DS

Available

6.2.5.1.- 零件进给工作站的应用

AE-PLC-DS

零件分配工作站

The Pieces Distributor Workstation, "AE-PLC-DS", designed by EDIBON is a feeder workstation commanded by a PLC, which provides pieces made in different color and materials to the system. The "AE-PLC-DS" keeps the pieces in a vertical storage, the...

AE-PLC-M

Available

6.2.5.2.- 过程工作站的应用

AE-PLC-M

装配工作站

The Mounting Workstation, "AE-PLC-M", designed by EDIBON, is a workstation commanded by a PLC that provides pieces to the system and mount them inside of the base pieces.The "AE-PLC-M" keeps the pieces in a vertical storage. The workstation take...

AUTOMATIC PRESSING WORKSTATION - AE-PLC-P

AE-PLC-P

Available

6.2.5.2.- 过程工作站的应用

AE-PLC-P

自动压机工作站

The Automatic Pressing Workstation, "AE-PLC-P", designed by EDIBON, is an workstation commanded by a PLC. The "AE-PLC-P" moves the pieces from the input zone to the pressing zone, once the piece is detected in the pressing zone, the "AE-PLC-P"...

AE-PLC-AT

Available

6.2.5.2.- 过程工作站的应用

AE-PLC-AT

自动拧紧工作站

The Automatic Screwdriving Workstation, "AE-PLC-AT", designed by EDIBON, is an automatic screw workstation commanded by a PLC that supply and mount four screws in a piece.The "AE-PLC-AT" keeps the screws in a vertical storage. The workstation take...

AE-PLC-MEMB

Available

6.2.5.2.- 过程工作站的应用

AE-PLC-MEMB

装瓶工作站

The Bottling Workstation, "AE-PLC-MEMB", designed by EDIBON, is an automatic rotary table with a vessel feeding system, a controlled water filling system, a cap feeder, a vessel closing system, and finally, an extraction system to a complete...

AE-PLC-MET

Available

6.2.5.2.- 过程工作站的应用

AE-PLC-MET

标签工作站

The The Labelling Process Workstation, "AE-PLC-MET", designed by EDIBON, is an workstation commanded by a PLC. The "AE-PLC-MET" also include a transporting system that carries the incoming bottles to the labelling zone, supplying the bottles one...

AE-PLC-ST

Available

6.2.5.2.- 过程工作站的应用

AE-PLC-ST

钻孔工作站

The Drilling Workstation, "AE-PLC-ST", designed by EDIBON, is an automatic drilling workstation commanded by a PLC. The "AE-PLC-ST" also include a conveyor system to transport the incoming pieces to the drilling zone where the drilling machine...

AE-PLC-SMOLD

Available

6.2.5.2.- 过程工作站的应用

AE-PLC-SMOLD

模具成型工作站

The Molding Workstation, "AE-PLC-SMOLD", designed by EDIBON, is an automatic molding workstation commanded by a PLC. The "AE-PLC-SMOLD" also include a conveyor system to transport the incoming pieces to the molding zone where the unit simulate a...

AE-PLC-SCOR

Available

6.2.5.2.- 过程工作站的应用

AE-PLC-SCOR

切割工作站

The Cutting Workstation "AE-PLC-SCOR", designed by EDIBON, is an automatic cutting workstation commanded by a PLC. The "AE-PLC-SCOR" also includes a conveyor system to transport the incoming pieces to the cutting zone where the cutting machine...

AE-PLC-FT

Available

6.2.5.2.- 过程工作站的应用

AE-PLC-FT

过滤工作站

The Filtering Workstation, "AE-PLC-FT", designed by EDIBON, is a filtration system commanded by a PLC. The "AE-PLC-FT" is composed of two tanks with a filter between them. The liquids are pumped from the first tank into the second tank through the...

AE-PLC-MS

Available

6.2.5.2.- 过程工作站的应用

AE-PLC-MS

混合工作站

The Mixing Workstation, "AE-PLC-MS", designed by EDIBON, is a workstation commanded by a PLC. The "AE-PLC-MS" is composed of three tanks with different liquids. These liquids are pumped and mixed in a reactor vessel using a pump and different...

AE-PLC-PHD

Available

6.2.5.2.- 过程工作站的应用

AE-PLC-PHD

冲压工作站

The Punching Workstation, "AE-PLC-PHD", designed by EDIBON, is a workstation commanded by a PLC. This workstation takes a piece and introduces it inside the punching zone that is protected with a polycarbonate screen. Once the piece is inside the...

AE-PLC-FS

Available

6.2.5.2.- 过程工作站的应用

AE-PLC-FS

加注工作站

The "AE-PLC-FS" is a filling system commanded by a PLC. The workstation detects the bottles that arrive on a conveyor belt to the filling position and pumps liquids from a reservoir tank into the bottles using a pump and different types of valves....

AE-PLC-CRS

Available

6.2.5.2.- 过程工作站的应用

AE-PLC-CRS

塞盖工作站

The "AE-PLC-CRS" is a corking system commanded by a PLC. The workstation detects the bottles that arrives on a conveyor belt to the corking position and closes them with a cap using a pressing cylinder. The "AE-PLC-CRS" also includes different...

AE-PLC-APB

Available

6.2.5.2.- 过程工作站的应用

AE-PLC-APB

罐子开盖工作站

The "AE-PLC-APB" is a bottles opening system commanded by a PLC. The unit is equipped with different containers and a retention system based on a cylinder, in order to allow the Robotic Arm Workstation "AE-BR" or the SCARA Arm Workstation "AE-SCA"...

CONTROL PROCESSES WORKSTATION - AE-PLC-CP

AE-PLC-CP

Available

6.2.5.2.- 过程工作站的应用

AE-PLC-CP

过程控制工作站

The Process Control Workstation, "AE-PLC-CP", designed by EDIBON, is a process control workstation commanded by a PLC that coordinates.The "AE-PLC-CP" workstation is designed as a modular system to facilitate the understanding of the unit.The main...

AE-PLC-MR1

Available

6.2.5.3.- 旋转工作站应用

AE-PLC-MR1

转盘工作站：供料、质量控制和组装（尺寸研究）

The Rotary Table Station: Feeding, Quality Control and Assembly (dimensional study), "AE-PLC-MR1", designed by EDIBON, is an automatic rotary table with a feeder, quality control and mounting system integrated into it. The "AE-PLC-MR1" has a...

AE-PLC-MR2

Available

6.2.5.3.- 旋转工作站应用

AE-PLC-MR2

转盘工作站：供料、质量控制和组装（材料和颜色研究）

The Rotary Table Workstation: Feeding, Quality Control, and Assembly (material and color study), "AE-PLC-MR2", designed by EDIBON, an automatic rotary table with a feeder, quality control and mounting system integrated in it. The "AE-PLC-MR2" has...

AE-PLC-MR3

Available

6.2.5.3.- 旋转工作站应用

AE-PLC-MR3

转盘工作站：自动加工控制（钻孔和抛光研究）

The Rotary Table Workstation: Automated Processing Control (drilling and polishing study), "AE-PLC-MR3", designed by EDIBON, is a processing workstation with a rotary table commanded by a PLC. This unit takes a piece from the input area, checks if...

AE-PLC-MR4

Available

6.2.5.3.- 旋转工作站应用

AE-PLC-MR4

转盘工作站：灌装、装瓶和封盖

The "AE-PLC-MR4" workstation, designed by EDIBON, is a rotary table workstation commanded by a PLC that perform the bottling, filling and capping functions.The "AE-PLC-MR4" workstation is designed as a modular system to facilitate the...

PIECES MANIPULATOR WORKSTATION - AE-PLC-MPS

AE-PLC-MPS

Available

6.2.5.4.- 零件处理工作站的应用

AE-PLC-MPS

零件处理工作站

The Pieces Manipulator Workstation, "AE-PLC-MPS", designed by EDIBON, allows the user to learn about the basic concepts of pneumatics, electro-pneumatics and vacuum (operation, elements of each circuit, etc.) without any previous knowledge or...

AE-PLC-T

Available

6.2.5.4.- 零件处理工作站的应用

AE-PLC-T

直线运输工作站

The Linear Transport Workstation, "AE-PLC-T", designed by EDIBON, is a workstation moves the pallets, that carries the pieces, along the system. The workstation is configured in a closed loop conveyor powered by an electrical motor, the whole...

AE-PLC-SPO

Available

6.2.5.4.- 零件处理工作站的应用

AE-PLC-SPO

定位工作站

The Positioning Workstation, "AE-PLC-SPO", has been designed by EDIBON to studiy three-axis positioners for computer integrated manufacturing systems. It sorts incoming pieces based on material and dimensions using a PLC-controlled manipulator.The...

ELECTRICAL HANDLING WORKSTATION - AE-PLC-MAE

AE-PLC-MAE

Available

6.2.5.4.- 零件处理工作站的应用

AE-PLC-MAE

电动操作工作站

The "AE-PLC-MAE" is an electrical handling system commanded by a PLC. The "AE-PLC-MAE" is composed of a two axis electrical manipulator with a pneumatic gripper to transport the pieces from the input pieces holder to the corresponding position,...

PNEUMATIC HANDLING WORKSTATION - AE-PLC-MAN

AE-PLC-MAN

Available

6.2.5.4.- 零件处理工作站的应用

AE-PLC-MAN

气动操作工作站

The Pneumatic Handling Workstation, "AE-PLC-MAN", has been designed by EDIBON, is a workstation commanded by a PLC, which performs handling and sorting functions. The workstation identify the color of the input pieces at the input pieces area,...

AC CONVEYOR BELT WORKSTATION - AE-PLC-CTCA

AE-PLC-CTCA

Available

6.2.5.4.- 零件处理工作站的应用

AE-PLC-CTCA

交流输送带工作站

The AC Conveyor Belt Station, "AE-PLC-CTCA," designed by EDIBON, is a PLC-controlled AC conveyor belt system. It consists of a conveyor belt, 4 position sensors to stop the belt at different positions, a motor position controller, an AC motor...

CC CONVEYOR BELT WORKSTATION - AE-PLC-CTCC

AE-PLC-CTCC

Available

6.2.5.4.- 零件处理工作站的应用

AE-PLC-CTCC

直流输送带工作站

The DC Conveyor Belt Workstation, "AE-PLC-CTCC", explores DC conveyor system management, including piece classification. It features industrial components like PLC, sensors, etc., enabling control of an automatic DC-powered conveyor system with...

如需更多信息，请联系我们