7.1.- 机械工业

机械工程是将物理学应用于我们周围的元素，以改进现有的机械设备或创造新的设备。

由于它是以物理原理为基础的，所以它的起源可以追溯到物理原理的起源，它的发展与力学的进步密切相关。然而，直到蒸汽机的发明，它才成为工业发展的支柱之一。

由于这个装置的产生，17世纪的工业革命发生了。从那一刻起，随着瓦特、史蒂芬森、特斯拉或兰金等地位的科学家和工程师的贡献，无论是在理念上还是在新机器的研发上，都开始了前所未有的更新。

随着这些机器的发展，人们对工业的概念发生了改变。大规模生产的引入，机器设计的改进，以及随之而来的生产工艺范围的扩大，催生了迄今为止难以想象的适应社会需求的各种新产品。

在机械工程中，应特别提及以下研究和应用领域：

机制。
结构。
动态。
震动。
摆动。

如今，从食品到航空航天，任何行业的技术创新都必须达到最高水平。所以新设备的研发就显得尤为重要，这样才能始终拥有最新的技术，才能达到工业4.0所要求的水平。

查看产品

机械工业设备

Showing 37-72 of 91 item(s)

Available

7.1.3.- 静态和动态

MGI

陀螺仪

The Gyroscope, "MGI", designed by EDIBON, allows the experimental demonstration of the different rotation modes of a gyroscope and the moments generated by the gyroscopic effect.The rotor of the electric motor (rotating motor) shares a...

Available

7.1.3.- 静态和动态

CGU

Centrifugal Governor Unit

The Centrifugal Governor Unit, "CGU", has been designed to study the operating mode of different centrifugal governors, including three interchangeable governors: Porter governor, Hartnell governor and Proell governor.Interchangeable governors...

Available

7.1.3.- 静态和动态

MED

Static and Dynamic Balancing Unit

The Static and Dynamic Balancing Unit, "MED", developed by EDIBON is a unit to study and analyze the oscillations and vibrations and how to eliminate or diminish them.Basically, the unit is formed by a shaft mounted on bearings. The shaft is...

Available

7.1.3.- 静态和动态

MES

Simple Balancing Unit

The Simple Balancing Unit, "MES", developed by EDIBON is a unit to study and analyze the oscillations and vibrations and how to eliminate or diminish them.Basically, the unit is formed by a shaft mounted on bearings. The shaft is coupled by pulley...

Available

7.1.3.- 静态和动态

MIF

Inertia Flywheel Unit

The Inertia Flywheel Unit, "MIF", consists of an inertia disc with a rotation shaft at the center of the disc.The shaft is supported at two points by bearings.A cord is attached by one of the ends to the shaft and wound around it. At the other end...

MRYE1

Available

7.1.3.- 静态和动态

MRYE1

Wheel and Axle Unit

The Wheel and Axle Unit, "MRYE1", has been designed by EDIBON to investigate the mechanics of a simple wheel and axle machine and to demonstrate the laws of the formation of equilibrium of moments in static systems.Two pulleys with different...

WHEEL AND DIFFERENTIAL AXLE UNIT - MRYE2

MRYE2

Available

7.1.3.- 静态和动态

MRYE2

Wheel and Differential Axle Unit

The Wheel and Differential Axle Unit, "MRYE2", has been designed by EDIBON to investigate the mechanics of a wheel and differential axle mechanism and demonstrating the force reduction on a differential pulley block.A wheel, consisting of a pulley...

MELH

Available

7.1.3.- 静态和动态

MELH

学习胡克定律的设备

The Unit for studying Hooke's Law, "MELH", designed by EDIBON, demonstrates the application of Hooke's Law and allows the visualization of the deformation of tension springs under load and the performance of oscillation experiments on a spring –...

MSHU

Available

7.1.3.- 静态和动态

MSHU

Simple Harmonic Motion Unit

This Simple Harmonic Motion Unit, "MSHU", designed by EDIBON, allows many experiments using several pendulums and devices, such as different types of pendulums (simple, bifilar, trifilar and Kater’s pendulum) and springs.Consists of a panel with a...

Available

7.1.3.- 静态和动态

SRI

Unit to Study Rotational Inertia

The Unit to Study Rotational Inertia, "SRI", has been designed to carry out tests to analyze the moments of inertia of a solid and a hollow cylinder, both with same mass and diameter. The moment of inertia of another hollow cylinder with different...

COMPUTER CONTROLLED TORSIONAL VIBRATION UNIT - MEVTC

MEVTC

Available

7.1.4.- 振动和振荡

MEVTC

Computer Controlled Torsional Vibration Unit

The Computer Controlled Torsional Vibration Unit, "MEVTC", has been designed by EDIBON to study torsion suffered by some shafts with rotation motion, apart from studying the torsional rigidity and the behavior of a torsional vibration system with...

MVRE

Available

7.1.4.- 振动和振荡

MVRE

Vibration of Coil Spring Unit

The Vibration of Coil Spring Unit, "MVRE", has been designed by EDIBON to study and understand a coil torsion spring, a mass-spring system and the fundamental properties of its characteristic periodic motion.In this sense, the unit consists of a...

Available

7.1.4.- 振动和振荡

MVL

Free Vibration Unit

The Free Vibration Unit, "MVL", has been designed by EDIBON to cover a range of demonstrations and experiments which provide the user with an understanding of the free vibrations of a simple spring-mass-damper system. Simple adjustments can be...

MVLF

Available

7.1.4.- 振动和振荡

MVLF

Free & Forced Vibration Unit

The Free and Forced Vibration Unit, "MVLF", has been developed to cover a range of demonstrations and experiments which provide the user with an understanding of the free and forced vibrations of a simple spring-mass-damper system. Simple...

CMVAS

Available

7.1.4.- 振动和振荡

CMVAS

设备综合机械振动分析

The Comprehensive Mechanical Vibration Analysis Unit, "CMVAS", has been designed by EDIBON for an in-depth study of vibrations in mechanical systems, a phenomenon present in most industrial and engineering processes. These vibrations can lead to...

UNIT FOR STUDYING FREE VIBRATION OF A BAR - MEVLB

MEVLB

Available

7.1.4.- 振动和振荡

MEVLB

Unit for Studying Free Vibration of a Bar

The Unit for Studying Free Vibration of a Bar,"MEVLB", allows to study the features of the free vibrations of a bending bar.The natural frequency of the bending bar can be modified adding additional loads at the free end of a bar or varying the...

Available

7.1.4.- 振动和振荡

MOT

扭转震动测试设备

The Torsional Oscillations Unit, "MOT", is intended for easy experiments. It enables to illustrate and investigate the torsional oscillation in single rotor, multi-rotor and geared systems. The unit basically consists of a rigid frame that have...

COMPUTER CONTROLLED CRITICAL SPEED INVESTIGATION UNIT - MVCC

MVCC

Available

7.1.4.- 振动和振荡

MVCC

设备临界速度研究设备，计算机控制

Some phenomena that appear in mechanical systems, such as vibration, self-centering and resonance in rotary shafts, can be clearly demonstrated with the Computer Controlled Critical Speed Investigation Unit, "MVCC".The operation of the "MVCC" unit...

MEER

Available

7.1.4.- 振动和振荡

MEER

设备轴旋转研究设备

The Whirling of Shafts Unit, "MEER", has been designed by EDIBON to demonstrate and determine different modes of oscillation and resonance of shafts with continuous distribution of mass under different conditions.The operation of the Whirling of...

Available

7.1.5.- 摩擦学 (摩擦, 磨损, 润滑)

MCF

Belt Friction Unit

The Belt Friction Unit, "MCF", allows us to carry out studies and investigations to compare the driving torque for a given degree of overlap of a flat belt (leather or rope) and a V belt.With this unit the relationship between the tensions in the...

Available

7.1.5.- 摩擦学 (摩擦, 磨损, 润滑)

MEF

Friction Study Unit

The Friction Study Unit, "MEF", allows the unit to illustrate the friction force by simple demonstrations.It is designed for the study of the relations between friction forces and normal forces, between hard or soft surfaces, between lubricated or...

MPCO

Available

7.1.5.- 摩擦学 (摩擦, 磨损, 润滑)

MPCO

Journal Bearing Unit

The Journal Bearing Unit, "MPCO", designed by EDIBON, allows to study the pressure distribution in sliding bearings. It illustrates the principle of hydrodynamic lubrication.The unit is mounted on a metallic structure assembled on wheels for its...

MEMT

Available

7.1.5.- 摩擦学 (摩擦, 磨损, 润滑)

MEMT

Tribology Modular Unit

The Tribology Modular Unit, "MEMT", designed by EDIBON, consists of a base unit with electronic console and a series of experimental units to investigate and visualize tribological phenomena.MEMT-UB. Drive Unit for Tribological Tests. This unit is...

DRIVE UNIT FOR TRIBOLOGICAL TESTS - MEMT-UB

配件 MEMT

Available

7.1.5.- 摩擦学 (摩擦, 磨损, 润滑)

MEMT-UB

Drive Unit for Tribological Tests

配件 MEMT

This unit is common for the modules type "MEMT".It consists of a base unit and an electronic console:The Base Unit consists of a drive unit formed by a DC motor with a shaft. The motor is mounted in a reduction gear, obtaining enough torque in the...

RADIAL PRESSURE DISTRIBUTION IN A JOURNAL BEARING - MEMT-1

配件 MEMT

Available

7.1.5.- 摩擦学 (摩擦, 磨损, 润滑)

MEMT-1

滑动轴承中的径向压力分布

配件 MEMT

This unit allows the visualization of the radial pressure distribution in a journal bearing with hydrodynamic lubrication.The "MEMT-1" unit consists of a journal bearing with hydrodynamic lubrication, a freely moving bearing housing with thirteen...

DYNAMIC FRICTION OF A CYLINDER ON A ROLLER - MEMT-2

配件 MEMT

Available

7.1.5.- 摩擦学 (摩擦, 磨损, 润滑)

MEMT-2

滚筒上圆柱体的动态摩擦

配件 MEMT

This unit allows to demonstrate the friction forces between several cylinders of different materials and a roller under different lubrication conditions.The "MEMT-2" unit consists of two levers that transmit a force applied by weights to a test...

DYNAMIC FRICTION OF A PIN ON A DISC - MEMT-3

配件 MEMT

Available

7.1.5.- 摩擦学 (摩擦, 磨损, 润滑)

MEMT-3

盘上螺栓的动态摩擦

配件 MEMT

This unit allows to study the friction forces between several vertical friction pins of different materials and a rotating friction disc.The end of each vertical pin is made of a different material and rubs against the rotating steel disc. The...

配件 MEMT

Available

7.1.5.- 摩擦学 (摩擦, 磨损, 润滑)

MEMT-4

车轮的滚动摩擦

配件 MEMT

This module allows to determine the slip forces between two rotating friction discs in contact.The slip between the discs is maintained constant by a gearbox. The pressure can be adjusted with a lever and a set of weights. The unit includes a...

配件 MEMT

Available

7.1.5.- 摩擦学 (摩擦, 磨损, 润滑)

MEMT-5

弹性流体动力润滑

配件 MEMT

This unit allows to investigate the thickness and characteristics of a lubricant film on a rolling sphere.The unit consists in a steel sphere and a driven glass disc.The sphere is pressed against the underside of the glass disc. The light from a...

配件 MEMT

Available

7.1.5.- 摩擦学 (摩擦, 磨损, 润滑)

MEMT-6

摩擦振动

配件 MEMT

This module allows to demonstrate the static friction, the sliding friction, the related friction vibrations and the slip-stick effects.Several weights are placed on a horizontally rotating friction disc. It is prevented from turning by a cord....

Available

7.1.5.- 摩擦学 (摩擦, 磨损, 润滑)

MCD

Thin Cylinder Unit

The Thin Cylinder Unit, "MCD", has been developed to enable the student to verify various analytical formulae with actual measured results. Strain gauges mounted in various positions and orientations on the cylinder provide an opportunity for...

UNIT FOR STUDYING BEARING FRICTION - MBF

Available

7.1.5.- 摩擦学 (摩擦, 磨损, 润滑)

MBF

Unit for Studying Bearing Friction

The Unit for Studying Bearing Friction, "MBF", has been designed by EDIBON to study sliding friction in slide bearings and rolling bearings. Since rolling friction is very little, rotational dynamics basic tests can be performed with the inertia...

BELT FRICTION UNIT WITH DYNAMOMETERS - MCF/A

MCF/A

Available

7.1.5.- 摩擦学 (摩擦, 磨损, 润滑)

MCF/A

Belt Friction Unit with Dynamometers

The Belt Friction Unit with Dynamometers, "MCF/A", designed by EDIBON, allows studies and investigations to compare the friction coefficient for a given contact angle of a flat belt and a V-belt.With this unit it is possible to observe the...

MCPG

Available

7.1.6.- 结构力学

MCPG

Thick Walled Cylinder Unit

In the Thick-Walled Cylinder Unit, "MCPG", the stresses are determined through the measurement of the strains produced on the surface. These strains are measured by strain gauges.The thick-walled vessel consists of an aluminum cylinder of length...

UNIT FOR STUDYING FORCES IN A JIB CRANE - MFPG

MFPG

Available

7.1.6.- 结构力学

MFPG

Unit for studying Forces in a Jib Crane

The Unit for studying Forces in a Jib Crane, "MFPG", is designed to study the tensile and compressive forces in a planar central force system based on the example of a crane jib.The unit represents a planar central force system in which multiple...

Available

7.1.6.- 结构力学

MVS

悬索桥测试设备

The Suspension Bridge Unit, "MVS", has been meticulously designed by EDIBON to explore the dynamics of stresses in a suspension bridge system. This unit simulates a suspension bridge using a deck and two parallel main cables, allowing students to...

如需更多信息，请联系我们

7.1.- 机械工业

机械工业 设备

MGI

CGU

MED

MES

MIF

MRYE1

MRYE2

MELH

MSHU

SRI

MEVTC

MVRE

MVL

MVLF

CMVAS

MEVLB

MOT

MVCC

MEER

MCF

MEF

MPCO

MEMT

MEMT-UB

MEMT-1

MEMT-2

MEMT-3

MEMT-4

MEMT-5

MEMT-6

MCD

MBF

MCF/A

MCPG

MFPG

MVS

机械工业设备