7.4.3.- 安装和维护惯例

安装和维护惯例 UNITS

Showing 13-23 of 23 item(s)

配件 MDU

Available

7.4.3.- 安装和维护惯例

MDU-SSDG

齿轮缺陷套装

配件 MDU

The Set to Study Damage in Gears, "MDU-SSDG", allows to study the vibrational behavior of gears with typical defects.For that purpose, gears with tooth defects and gears without defects are included, so a comparative study can be carried out. The...

配件 MDU

Available

7.4.3.- 安装和维护惯例

MDU-SCM

连杆机构套装

配件 MDU

The compressors and pumps frequently use crank and connecting rod mechanisms. The force and mass oscillations cause vibrations in the units.The Set of Crank Mechanism, "MDU-SCM", allows to adjust the stroke, mass compensation and bearing...

SET TO STUDY CAVITATION IN PUMPS - MDU-SSCP

配件 MDU

Available

7.4.3.- 安装和维护惯例

MDU-SSCP

泵腔汽蚀套装

配件 MDU

Pump cavitation is produced when steam cavities are created within a fluid in which forces act responding to the pressure differences.Cavitation causes noise, damage to components and loss of performance.The Set to Study Cavitation in Pumps,...

配件 MDU

Available

7.4.3.- 安装和维护惯例

MDU-SSVF

MDU风机振动套装

配件 MDU

In the Blower Vibration Set for MDU, "MDU-SSVF", the vibrations are magnetically induced. It is possible to study three impellers with a different number of movable vanes. It is also possible to study the gyroscopic effect by mounting the flywheel...

SET OF ELECTROMECHANICAL VIBRATIONS - MDU-SEV

配件 MDU

Available

7.4.3.- 安装和维护惯例

MDU-SEV

电机振动套装

配件 MDU

Among the drive systems are the asynchronous motors, which generate vibrations in machines.This is the case with an asymmetric air gap (space between rotor and stator), in which the magnetic vibrational forces induce torsional and bending...

DISPLACEMENT SENSORS FOR MDU UNIT - MDU-SD

配件 MDU

Available

7.4.3.- 安装和维护惯例

MDU-SD

MDU设备位移传感器

配件 MDU

Two displacement sensors which, together with the Set of Elastic Shaft ,"MDU-SES", and the Software, Sensors and Control for MDU Unit, "MDU-SSC", allow you to represent subcritical and supercritical shaft orbits in resonance.

COMPUTER CONTROLLED UNIT TO STUDY VIBRATIONS IN MACHINE SUPPORTING STRUCTURES - VMSC

VMSC

Available

7.4.3.- 安装和维护惯例

VMSC

计算机控制的机器支撑振动研究设备

nd various tunings are tested. The transmission of vibrations to the supporting structure is measured. An inductive displacement sensor is used to record the eccentricity of the imbalance masses.The unit has a frame, a supporting structure, and a...

MSCT

Available

7.4.3.- 安装和维护惯例

MSCT

Screw Joint Testing Unit

The Screw Joint Testing Unit, "MSCT", represents the simulation of a tightening set consisting of a screw and a nut on two rectangular shaped beams.A very precise torque wrench performs the tightening through a threaded rod and a flywheel. The...

MSLG

Available

7.4.3.- 安装和维护惯例

MSLG

车床齿轮研究设备

The Unit to Study Lathe Gears, "MSLG", has been designed by EDIBON to visually represent the mechanical transmission systems used in conventional lathes commonly employed in machining workshops and industrial facilities. The unit allows the...

BASIC UNIT OF MECHANICAL DRIVE SYSTEMS - MDSU

MDSU

Available

7.4.3.- 安装和维护惯例

MDSU

Basic Unit of Mechanical Drive Systems

The Basic Unit of Mechanical Drive Systems, "MDSU", consists of a main frame where a series of accessories and elements are arranged, distributed in modules of different level, thought to introduce the user in the field of mechanical systems and...

Available

7.4.3.- 安装和维护惯例

RGT

Rigging Training Unit

The Rigging Training Unit, "RGT", has been designed by EDIBON to the study of techniques to move loads of various shapes, sizes and types safely.The unit consists of an adjustable height gantry frame made of welded steel and beam attachment...

如需更多信息，请联系我们